RTS3T005 - TE CONNECTIVITY

01-2019, Rev. 0119

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

RT-iPower

Power PCB Relay RT Inrush Power

n 1 pole 16A, 1 form A (NO) contact (AgSnO2 or W pre-make contact +

AgSnO2)

n Mono- or bistable coil

n 5kV/10mm coil-contact

n Reinforced insulation

n Test tab (manual operator) optional for RTT3T bistable versions

n WG version: product in accordance to IEC60335-1

n RTS3T: Electronic ballast UL508/NEMA 410 rated

n RTSET: 8A Electronic ballast rated

Typical applications

LED lighting systems, ﬁlament and incandescent lamp loads, movement

detectors, light sensors, intelligent wall sockets, motors (RTS3L), bus

system actuators.

Approvals

VDE Cert. No. 40007571,UL E214025, cCSAus 1142018

Technical data of approved types on request.

Contact Data RT.3T / RTSET RTS3L

Contact arrangement 1 form A (NO) contact

Rated voltage 250VAC

Max. switching voltage 480VAC

Rated current 16A

Limiting continuous current 16A 20A

Limiting making current,

max. 20ms (incand. lamps)

165A peak 120A peak

max. 200µs 800A peak

Breaking capacity max. 4000VA

Contact material W (pre-make cont.) AgSnO2

+AgSnO2

Contact style pre-make contact single contact

Frequency of operation, with/without load 360/3600h-1

Operate/release time max., DC coil 10/5ms

Operate/Reset time max., bistable version 10/10ms

Bounce time max. 4ms

Contact ratings

Type Contact Load Cycles

IEC 61810

RTS3L A (NO) 20A, 250VAC resistive, 70°C 20x103

RTS3L monostable A (NO) 16A, 250VAC resistive, 85°C 100x103

RTS3T A (NO) 16A, 250VAC resistive, 85°C 5x103

In process:

Type Contact Load Cycles

RTSET A (NO) 16A, 250VAC resistive, 85°C 5x103

UL 508

RTS3L A (NO) 20A, 250VAC, general purpose, 70°C 20x103

RTS3L A (NO) 16A, 250VAC, resistive, 85°C 50x103

RTS3L A (NO) TV8, 240VAC, 40°C 25x103

RTS3L A (NO) 1.5hp, 240VAC, 70°C 30x103

RTS3T A (NO) 1200W Tungsten, 120VAC/277VAC,

60Hz, 50°C 6x103

RTS3T A (NO) 2A, 480VAC, magnetic ballast, 80°C 10x103 *

RTS3T A (NO) 2A, 480VAC, electronic ballast, 80°C 10x103*

RTS3T A (NO) 3A, 277VAC, electronic ballast, 80°C 15x103

RTS3T A (NO) 5A, 120VAC, electronic ballast, 80°C 15x103

RTS3T A (NO) 5A, 277VAC, electronic ballast, 85°C 10x103

RTS3T A (NO) 5A, 347VAC, electronic ballast, 105°C

with z.c 10x103*

RTS3T A (NO) 5A, 347VAC, magnetic ballast, 105°C 10x103

RTS3T A (NO) 3A, 480VAC, magnetic ballast, 105°C 10x103*

RTSET A (NO) 16A, 250VAC, general purpose, 85°C 5x103

RTSET A (NO) 8A, 277VAC, electronic ballast, 85°C 6x10³

RTSET A (NO) 5A, 277VAC, electronic ballast, 85°C 10x103

RTSET A (NO) 3A, 277VAC, electronic ballast, 85°C 20x103

RTSET A (NO) 5A, 120VAC, electronic ballast, 85°C 20x103

* Special test conditions available on request

Contact Data (continued),

Mechanical endurance RT.3T / RTSET RTS3L

DC coil >5x106 ops. >10x106 ops.

bistable version >3x106 / >1x106 ops. >5x106 ops.

tab manually operated >1x103 ops. -

Coil Data, monostable DC coil RT.3T RTSET RTS3L

Coil voltage range 5 to 110VDC

Operative range, IEC 61810 2

Coil insulation system according UL1446 class F

Coil versions, monostable DC coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10%1) mW

005 5 3.5 0.5 62 403

006 6 4.2 0.6 90 400

009 9 6.3 0.9 203 400

012 12 8.4 1.2 360 400

024 24 16.8 2.4 1440 400

048 48 33.6 4.8 5520 417

060 60 42.0 6.0 85701) 420

110 110 77.0 11.0 288001) 420

1) Coil resistance ±12%.

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

01-2019, Rev. 0119

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

RT-iPower

Power PCB Relay RT Inrush Power (Continued)

Insulation Data

Initial dielectric strength

between open contacts 1250Vrms

between contact and coil 5000Vrms

Clearance/creepage

between contact and coil ≥10/10mm

Material group of insulation parts IIIa

Tracking index of relay base PTI 250V

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature RT.3T / RTS3L

monostable DC coil -40 to 105°C

bistable 1 coil -10 to 105°C

bistable 2 coils -40 to 105°C

Ambient temperature RTSET

monostable DC coil -40 to 85°C

bistable 1 coil -10 to 85°C

bistable 2 coils -40 to 85°C

RT.3T / RTSET RTS3L

Category of environmental protection

IEC 61810 RTII - ﬂux proof

RTIII - wash tight available upon request

Vibration resistance (functional), 10g 20g

monostable version

Shock resistance (destructive) 100g

Terminal type PCB-THT, plug-in2)

Weight, without / with test tab 14/16g 14g/-

Resistance to soldering heat THT

IEC 60068-2-20 270°C/10s

RT.3T / RTSET RTS3L

Packaging/unit

without test tab tube/20 pcs., tube/20 pcs.,

box/500 pcs. box/500 pcs.

with test tab tray/25 pcs., -

box/100 pcs. -

2) RTT3T or bistable 2 coil version: PCB mounting only. See Accessories.

Accessories RTS.

For details see datasheet

Accessories Industrial Power Relay RT

Socket available for 1 coil version only.

NOTE: indicated contact ratings and electrical endurance data for direct

wiring of relays (according IEC 61810-1); for relays mounted on sockets

deratings may apply.

Coil Data (continued),

bistable coils 1 coil 2 coils

Magnetic system polarized, bistable

Coil voltage range 3 to 24VDC

Operative range, IEC 61810 2

Limiting voltage, % of rated coil voltage 120% 150%

Min./Max. energization duration 30ms/1min at <10% duty factor

Coil insulation system according UL1446 class F

Coil Data RT.3T RTS3L

Coil versions, bistable

Coil Rated Set Reset Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10% mW

Coil versions, bistable 1 coil

A03 3 2.1 1.7 21 429

A12 12 8.4 6.6 360 400

A24 24 16.8 13.2 1440 400

Coil versions, bistable 2 coils

F03 3 2.1 1.7 15 600

F12 12 8.4 6.6 240 600

F24 24 16.8 13.2 886 650

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Coil Data RTSET

Coil versions, bistable

Coil Rated Set Reset Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10% mW

Coil versions, bistable 1 coil

A03 3 2.1 1.8 21 429

A12 12 8.4 7.2 360 400

A24 24 16.8 14.4 1440 400

Coil versions, bistable 2 coils

F03 3 2.1 1.8 15 600

F12 12 8.4 7.2 240 600

F24 24 16.8 14.4 886 650

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Bistable coils - operation

Version 1 coil 2 coils

Coil terminals A1 A2 A1 A3 A2

Operate + - + -

Reset - + - +

Contact position not deﬁned at delivery

01-2019, Rev. 0119

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

RT-iPower

Power PCB Relay RT Inrush Power (Continued)

Terminal assignment

Bottom view on solder pins

a) a) Indicated contact position during or after coil

energization with reset voltage.

b) for 2 coil version only

monostable version

Dimensions / PCB layout

16 A, pinning 5 mm

S0272-BW

*) With the recommended PCB hole

sizes a grid pattern from 2.5 mm to

2.54 mm can be used.

version without test tab

version with test tab

b) for 2 coil version only

bistable version

01-2019, Rev. 0119

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

Product code Version Contacts Contact material Coil version Coil Version Part number

RTS3L005 Without test tab, 1 form A (NO) AgSnO2Monostable 5VDC Standard 1-1415898-8

RTS3L006 16mm high contact 6VDC 4-1415898-4

RTS3L012 12VDC 1-1415898-9

RTS3L024 24VDC 1-1415898-4

RTS3LA12 Bistable, 1 coil 12VDC 2-1415898-3

RTS3LF12 Bistable, 2 coils 12VDC 2-1415898-5

RTS3LF24 24VDC 2-1415898-6

RTS3T005 Without test tab, W pre-make + AgSnO2Monostable 5VDC 1-1415898-6

RTS3T012 15.7mm high 12VDC 1415898

RTS3T024 24VDC 1415898-1

RTS3L048 48VDC 2-1415898-1

RTS3T048 48VDC 1-1415898-1

RTS3T060 60VDC 1-1415898-2

RTS3TA05 Bistable, 1 coil 5VDC 1-1415898-5

RTS3TA06 6VDC 3-1415898-1

RTS3TA12 12VDC 1415898-2

RTS3TF03 Bistable, 2 coils 3VDC 1415898-4

RTS3TF12 12VDC 1415898-5

RTS3TF24 24VDC 1415898-6

RTT3TA12 With test tab, Bistable, 1 coil 12VDC 1415898-7

RTT3TF24 23.6mm high Bistable, 2 coils 24VDC 1-1415898-0

RTS3L012WG Without test tab, 1form A (NO) AgSnO2Monostable 12VDC IEC60335-1 2-1415898-7

RTS3L024WG 15.7 mm high contact 24VDC compliant 5-1415898-1

RTS3T012WG W pre-make + AgSnO212VDC 5-1415898-6

RTS3TA24WG Bistable 1 coil 24VDC 4-1415898-7

RTSET005 Without test tab, 1 form A (NO) W pre-make + AgSnO2Monostable 5VDC Standard 7-1415898-7

RTSET012 15.7mm high contact 12VDC 7-1415898-9

RTSET024 24VDC 8-1415898-0

RTSETA12 Bistable, 1 coil 12VDC 8-1415898-6

RTSETA24 24VDC 8-1415898-7

RTSETF12 Bistable, 2 coils 12VDC 9-1415898-1

RTSETF24 24VDC 9-1415898-3

This list represents the most common types and does not show all variants covered by this datasheet.

Other types on request.

General Purpose

RT-iPower

Power PCB Relay RT Inrush Power (Continued)

Product code structure Typical product code RT S 3 T A12

Type

RT Power PCB Relay RT1 Inrush Power

Version

S Without test tab T With test tab (manual operator)

for version ‚RTT3T‘ bistable coil only

Contact conﬁguration

3 1 form A (NO) contact E 1 form A(NO) ‚electronic ballast‘ contact

Contact material

L AgSnO2 T Tungsten (W) pre-make + AgSnO2

Coil

Coil code: please refer to coil versions table

Version

Blank Standard Version

WG Product in accordance to IEC 60335-1