B-58 APEM www.apem.com
10400 series
Professional pushbutton switches - threaded bushing Ø 10 (.393)
Distinctive features and specifications
B
❑ CECC approved
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts :
- silver
- gold plated silver
• Terminal seal : epoxy
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
2A 220VAC - 3A 110VAC - 3A 24VDC
• Minimum load : 100µA 10mV
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Veff. 50 Hz min. between terminals of the same pole
2.000 Veff. 50 Hz min. between terminals and frame
2.000 Veff. 50 Hz min. between terminals of adjacent poles
• Electrical life : 50.000 cycles
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.106 Ft.lb)
max. applied to nut
• Operating temperature :
-40°C to +85°C
• Max. panel thickness :
3,5 mm (.138)
APPROVAL
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, add “CECC” to model number.
CECC 96401-001
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 1 knurled nut, 1 hex nut, 1 locking ring and 1
lockwasher. They are presented in section I.
Packaging unit : 25 pieces.
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
ABOUT THIS SERIES
Complete part numbers are shown on the following page.
APEM www.apem.com B-59
10400 series
Professional pushbutton switches - threaded bushing Ø 10 (.393)
B
Double pole
Single pole
Single pole Double pole
• 1 and 2 pole configurations
• Available with matt black finish :
consult factory for model number
MODEL
STRUCTURE
AB
1-2 1-3
Silver contacts
104350003 ON - MOM
Gold plated silver contacts
104350108 ON - MOM
AB
2-1 2-3
5-4 5-6
Silver contacts
104450003 ON - MOM
Gold plated silver contacts
104450108 ON - MOM
PANEL CUT-OUT
➞Keyway
➞Keyway
➞Keyway
213231
(.098)
(.047)
(.066)
(.196)
1.70
5.00
1.20
2.50
6.20
Ø10.20
2.20
(.401 DIA)
(.086)
(.244)
0.50
4.00
2.50
Ø6.40
11.005.00 Ø14.00
5.0012.70
Ø10.00 X 0.75 SI
(.551 DIA)
2 3 1
(.393 DIA X 0.75 IS)
(.251 DIA)
(.098) (.157)
(.019)
(.196) (.433)
(.196)(.500)
14.00
(.551)
(.314)
8.00
2
3
1
AB
EPOXY
(.500) (.196)
(.433)(.196)
(.019)
(.157)
(.098)
(.236)
(.551)
(.551)
(.251 DIA)
(.393 DIA X 0.75 IS)
2
3
14
6
5
1 3 2
(.551 DIA)
Ø10.00 X 0.75 SI
12.70 5.0014.00
Ø14.00
5.00 11.00
Ø6.40
2.50
6.00
4.00
0.50
14.00
B
A
EPOXY
CAP
+ U...
U2600
(.511 DIA)
(.236)
(.118)
3.00
6.00
Ø13.00
Cap colours
Replace last "0" by number
1blue 5yellow
1/4 dark blue 6red
2black 7ivory
3green 7/1 white
4grey 9orange
