LESHAN RADIO COMPANY, LTD.
G4–1/2
1
3
2
Switching Diode
MAXIMUM RATINGS
Rating Symbol Value Unit
Continuous Reverse V oltage V R75 Vdc
Peak Forward Current I F200 mAdc
Peak Forward Surge Current I FM(surge) 500 mAdc
DEVICE MARKING
BAS116LT1 = JV
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Total Device Dissipation FR– 5 Board, (1) PD225 mW
TA = 25°C
Derate above 25°C 1.8 mW/°C
Thermal Resistance, Junction to Ambient RθJA 55 6 °C/W
Total Device Dissipation PD300 mW
Alumina Substrate, (2) TA = 25°C
Derate above 25°C 2.4 mW/°C
Thermal Resistance, Junction to Ambient RθJA 417 °C/W
Junction and Storage Temperature TJ , Tstg –55 to +150 °C
ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Reverse Voltage Leakage Current (V R = 75 Vdc ) I R–– 5.0 nAdc
(V R = 75 Vdc , T J =150°C) –– 80
Reverse Breakdown V oltage V (BR) 75 — Vdc
(I BR = 100 µAdc)
Forward Voltage (I F = 1.0 mAdc) V F–– 900 mV
(I F = 10 mAdc) — 1000
(I F = 50 mAdc) –– 1100
(I F = 150 mAdc) — 1250
Diode Capacitance(V R = 0, f = 1.0 MHz) C D— 2.0 pF
Reverse Recovery T ime t rr — 3.0 µs
(I F = I R = 10mAdc, )( Figure 1)
1. FR–5 = 1.0 x 0.75 x 0.062 in.
2. Alumina = 0.4 x 0.3 x 0.024 in. 99.5% alumina.
BAS116LT1
CASE 318–08, STYLE 8
SOT–23 (TO–236AB)
This switching diode has the following features:
• Low Leakage Current Applications
• Medium Speed Switching Times
• Available in 8 mm Tape and Reel
Use BAS116LT1 to order the 7 inch/3,000 unit reel
Use BAS116LT3 to order the 13 inch/10,000 unit reel
3
CATHODE 1
ANODE
LESHAN RADIO COMPANY, LTD.
G4–2/2
BAS116LT1
Notes: 1. A 2.0 kΩ variable resistor adjusted for a Forward Current (I F ) of 10mA.
Notes: 2. Input pulse is adjusted so I R(peak) is equal to 10mA.
Notes: 3. t p
»
t rr
Figure 1. Recovery Time Equivalent Test Circuit
+10 V 2.0 k
820 Ω
100 µH0.1µF
D.U.T.
0.1 µF
50 Ω OUTPUT
PULSE
GENERATOR
t r
50 Ω INPUT
SAMPLING
OSCILLOSCOPE
t pt
10%
90%
I F
I R
t rr t
i R(REC) = 1.0 mA
OUTPUT PULSE
(I F = I R = 10 mA; MEASURED
at i R(REC) = 1.0 mA)
INPUT SIGNAL
I F
V R