ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Range series Wide temperature range of - 55 ~ +105C, with 7mm height. ST High Temperature SA Specifications Item Performance Characteristics - 55 ~ +105C Category Temperature Range Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 220F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3(A), whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Rated voltage ( V) tan (MAX.) tan 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120 Hz 6.3 3 6 Rated voltage (V) Z - 25C/ Z+20C Impedance ratio Z - 40C/ Z+20C ZT/Z20 (MAX.) Stability at Low Temperature 10 2 5 16 2 4 25 2 3 35 2 3 50 2 3 Capacitance change Within 25% of initial value (16Vor less) Within 20% of initial value (5Vor more) tan Leakage current 200% or less of initial specified value Initial specified value or less Endurance After 1000 hours' application of rated voltage at 105C, capacitors meet the characteristic requirement listed at right. Shelf Life After leaving capacitors under no load at 105C for 1000 hours, they meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on black sleeve. Type numbering system (Example: 10V 33F) Radial Lead Type 1 d Sleeve 2 3 4 5 6 7 8 9 10 11 US T 1 A 3 3 0 M D H P 0.5 D+0.5MAX Configuration L+1MAX 15MIN 4MIN Capacitance tolerance (20%) D Code Rated Capacitance (33 F) 4~6.3 DH 8 CH Rated voltage (10V) D 4 5 6.3 8 P 1.5 2.0 2.5 3.5 d 0.45 0.45 0.45 0.5 Series name Type * The PET sleeve product is also available upon request. In this case, T will be put at 11th digit of type numbering system. Dimensions 6.3 0J V Cap.(F) Code 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4x 7 5x 7 5x 7 6.3 x 7 8x 7 10 1A 5x 7 5x 7 6.3 x 7 8x 7 8x 7 34 42 50 77 130 16 1C 38 47 59 96 140 4x 7 5x 7 6.3 x 7 6.3 x 7 8x 7 25 1E 29 44 57 68 107 5x 7 6.3 x 7 6.3 x 7 8x 7 35 1V 33 51 63 78 4x 7 5x 7 6.3 x 7 8x 7 24 36 57 72 D x L (mm) 50 1H 1.0 4x 7 2.3 4x 7 3.5 4x 7 5.0 4x 7 10 4x 7 19 4x 7 24 4x 7 29 5x 7 44 6.3 x 7 65 8x 7 Case size Rated ripple Rated Ripple (mA rms) at 105C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Please refer to page 18, 19, 20 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100Q-1