© 2014 Fairchild Semiconductor Corporation FEBFAN6602RM6X_CH10U40A • Rev. 1.1
User Guide for
FEBFAN6602R_CH10U40A
Evaluation Board
Fairchild Computing Notebook Adapter
Featured Fairchild Product:
FAN6602R
Direct questions or comments
about this evaluation board to:
“Worldwide Direct Support”
Fairchild Semiconductor.com
© 2014 Fairchild Semiconductor Corporation 2 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
Table of Contents
1. Introduction ............................................................................................................................... 3
2. Evaluation Board Specifications ............................................................................................... 4
3. Photographs............................................................................................................................... 5
4. Printed Circuit Board ................................................................................................................ 6
5. Schematic .................................................................................................................................. 7
6. Bill of Materials ........................................................................................................................ 8
7. Transformer and Winding Specifications ............................................................................... 10
8. Test Conditions & Test Equipment......................................................................................... 11
9. Performance of Evaluation Board ........................................................................................... 11
9.1. Input Wattage at No Load Condition ............................................................................. 11
9.2. Startup Time................................................................................................................... 12
9.3. Hold-up Time ................................................................................................................. 12
9.4. Input Current .................................................................................................................. 13
9.5. DC Output Rising Time ................................................................................................. 13
9.6. Dynamic Response......................................................................................................... 14
9.7. Output Ripple & Noise .................................................................................................. 14
9.8. VDD Voltage Level ....................................................................................................... 15
9.9. Short-Circuit Protection (SCP) ...................................................................................... 15
9.10. Overload Protection (OLP) ............................................................................................ 16
9.11. Voltage Stress on MOSFET & Rectifiers ...................................................................... 16
9.12. Line & Load Regulation ................................................................................................ 17
9.13. Efficiency ....................................................................................................................... 17
9.14. Over-Current Protection( OCP ) .................................................................................... 18
9.15. Conducted Electromagnetic Interference (EMI) ............................................................ 19
9.16. Surge Test ...................................................................................................................... 19
9.17. ESD Test ........................................................................................................................ 20
10. Revision History ..................................................................................................................... 21
© 2014 Fairchild Semiconductor Corporation 3 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
This user guide supports the evaluation kit for the FAN6602R. It should be used in
conjunction with the FAN6602R datasheets as well as Fairchild’s application notes and
technical support team. Please visit Fairchild’s website at https://www.fairchildsemi.com/
1. Introduction
This document is an engineering report describing a 40 W power supply using the
FAN6602R, which is targeted for notebook adapters. It also describes the simple, low
cost and high performance reference design evaluation board.
The operating current in the FAN6602R is as small as 3 mA. The small operating current
results in higher efficiency and reduces the VDD hold-up capacitance requirement. Once
the FAN6602R enters deep-green mode, the operating current is reduce to 0.6 mA, thus
assisting the power supply to easily meet the power conservation.
By using the FAN6602R, an adapter can be implemented with fewest external
components and minimized cost.
© 2014 Fairchild Semiconductor Corporation 4 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
2. Evaluation Board Specifications
All data in Table 1 was measured with 90 VAC~264 VAC line input at an ambient temperature of 25°C.
Table 1. Summary of Features and Performance
Specification
Min.
Max.
Unit
Input Voltage
90
264
VAC
Input Frequency
47
63
Hz
Description
Design Spec.
Test Result
Output Voltage
18.05~19.95 V
0.9%
Output Current
Protection
2.5 ~3.5 A
2.93~3.02 A
Input Power
< 100 mW
85 mW
Ripple
345 mVp-p (Max.)
Startup Time
< 2 S
1.8 S
Dynamic
>18.5 V
18.7 V
Voltage Stress
600 V
582 V
100 V
93 V
Efficiency
Avg. 85.29%
89.09% at 115 V
89.16% at 230 V
Conducted EMI
Under 6 dB
3 dB Margin
© 2014 Fairchild Semiconductor Corporation 5 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
3. Photographs
Figure 1. Photograph (W x L: 34 x 84 mm2) Top View
Figure 2. Photograph (W x L: 34 x 84 mm2) Bottom View
Figure 3. Photograph (H:24 mm) Side View
© 2014 Fairchild Semiconductor Corporation 6 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
4. Printed Circuit Board
Figure 4. Top View
Figure 5. Bottom View
© 2014 Fairchild Semiconductor Corporation 7 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
5. Schematic
Figure 6. Evaluation Board Schematic
GND
FB
RT
GATE
VDD
SENSE
L
N
F1
Fuse
2A
C2
0.33µF
275V
R1
1.5M
ohm
R2
1.5M
ohm
BD1
Bridge Rectifier
2A/600V
C3
2.2nF
400V
C4
82µF
400V
R7
100k ohm
C5
1nF
1kV
D2
1N4007
Q1
MOSFET
7.5A/600V
R8
0.33 ohm
1W
R20
20
ohm
R9
0 ohm
R17
100
ohm
D5
1N4148 D3
1N4007
L1
short
D4
1N4148
C9
22µF
50V
C12
4.7µF
50V
C14
0.1µF
C8
470pF
R6
100 ohm
R11
5.6k ohm
U1
FAN6602R
TR2
NTC
100k ohm
C13
1nF
C7
1nF
R12
0 ohm
R16
120k ohm
R15
18k ohm
R13
620 ohm
R14
1k ohm C10
6.8nF
U2
TL431
U3
Photo-coupler
U3
Photo-coupler
D1
20S100CT
C1
1nF
Vo
GND
R3
20 ohm
C6
680µF
25V
MOV
C15
1µF
100V
TX2
R18
4.7k ohm
C11
330µF
25V
© 2014 Fairchild Semiconductor Corporation 8 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
6. Bill of Materials
Part Specification
Package
Qty.
No.
JUMPER WIRE 0.8ψ(mm)
REEL
8
JP0~JP4, NTC1, L1, L2
Metal-Oxide Resister 1 W 0.33 Ω ±10%
REEL
1
R8
SMD Resister 0805 0 Ω ±5%
REEL
1
R9, R12
SMD Resister 0805 20 Ω ±5%
REEL
1
R20
SMD Resister 0805 100 Ω ±5%
REEL
2
R6
SMD Resister 0805 620 Ω ±5%
REEL
1
R13
SMD Resister 0805 1 kΩ ±5%
REEL
1
R14
SMD Resister 0805 5.6 kΩ ±5%
REEL
1
R11
SMD Resister 0805 18 kΩ ±5%
REEL
1
R15
SMD Resister 0805 4k7 Ω ±5%
REEL
1
R18
SMD Resister 1206 20Ω ±5%
REEL
1
R3
SMD Resister 1206 100 Ω ±5%
REEL
1
R17
SMD Resister 1206 100 kΩ ±5%
REEL
1
R7
SMD Resister 1206 120 kΩ ±5%
REEL
1
R16
SMD Resister 1206 1.5 MΩ ±5%
REEL
2
R1, R2
0805 X7R ±0% 1 nF 50 V
REEL
2
C7, C13
0805 X7R ±10% 470 pF 50 V
REEL
1
C8
0805 X7R ±10% 6.8 nF 50 V
REEL
1
C10
0805 X7R ±10% 0.1 μF 50 V
REEL
1
C14
1206 X7R ±10% 1 nF 100 V
REEL
1
C1
1206 X7R ±10% 1 μF 100 V
REEL
1
C15
Ceramic Capacitor 1 nF 1 kV
REEL
1
C5
Electrolytic Capacitor 82 μF 400 V 105°C
REEL
1
C4
Electrolytic Capacitor 680 μF 25 V 105°C
REEL
1
C6
Electrolytic Capacitor 22 μF 50 V 105°C
REEL
1
C9
Electrolytic Capacitor 330 μF 25 V 105°C
REEL
1
C11
Electrolytic Capacitor 4.7 μF 50 V 105°C
REEL
1
C12
X2 Capacitor 0.33 μF 275 V ±10 %
REEL
1
C2
Y1 Capacitor 2.2 nF 250 V ±20 %
REEL
1
C3
MOV Oxide Varistor 471
REEL
1
MOV
Common Choke 25 mH ±10 %
SUMIDA (04291-T145)
1
TX2
Transformer RM-8 920 μH
SUMIDA (10344-T018)
1
TR1
FUSE GLASS 250 V/2 A 36SG Slow-Blow
3.6ψ x 10 mm
1
F1
NTC Resister 100 kΩ
REEL
1
TR2
SMD Diode 1 A/1000 V SOD-80
LL4148 REEL
2
D4, D5
Diode 1 A/700 V DO-41
1N4007 REEL
2
D2, D3
Continued on the following page…
© 2014 Fairchild Semiconductor Corporation 9 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
Part Specification
Package
Qty.
No.
Bridge Rectifier 2 A/600 V
2KBP06M
1
BD1
Schottky Diode 20 A/100 V TO-220
YM20S100CT
1
D1
MOSFET 7.5 A/600 V TO-220
FQP8N60C
1
Q1
REGULATOR ±1% TO-92
FAN431ACZ-AP
1
U2
Photo Coupler DIP
FOD817A
1
U3
PWM Controller SOT23-6L
FAN6602RM6X
1
U1
Heat Sink 55 x 20 x 1.5 mm
MCH0636
1
HS1
Heat Sink 11.5 x 24.9(L) x 17(H) x 1.5(W) mm
MCH0637
1
HS2
PCB PLM0068 REV0
For FAN6602R 40 W
1
© 2014 Fairchild Semiconductor Corporation 10 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
7. Transformer and Winding Specifications
Core: RM-8
Bobbin: RM-8
Figure 7. Transformer Specifications & Construction
Table 2. Winding Specifications
Winding
Terminal
Winding
Turns
Isolation Layer
Start Pin
End Pin
Turns
N4
2
3
0.25 mm*1
33
4
Copper Shielding (E2)
11
Open
Copper Foil
0.025 mm
1.2
3
N3
10
11
0.25 mm*1
9
1
N2
TP6
TP7
0.5 mm*1
12
3
Copper Shielding (E1)
11
Open
Copper Foil
0.025 mm
1.2
3
N1
1
2
0.25 mm*1
33
2
© 2014 Fairchild Semiconductor Corporation 11 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
Table 3. Electrical Characteristics
Pin
Specification
Remark
Inductance
3 - 1
920 µH ±10%
1 kHz, 1 V
Effective Leakage
3 - 1
50 µH Max.
Short Other Pin
8. Test Conditions & Test Equipment
Table 4. Test Conditions & Test Equipment
Evaluation Board #
FEBFAN6602RM6X_CH10U40A
Test Date
2014-12-02
Test Temperature
25℃
Test Equipments
AC Power Source: 6800 AC POWER SOURCE
Electronic Load: Chroma 63030 and 63102
Power Meter : WT210
Oscilloscope : LeCory 24Xs-A
9. Performance of Evaluation Board
9.1. Input Wattage at No Load Condition
Test Condition:
Measure the input wattage at no load condition.
Table 5. Test Results
Input Voltage
Input Wattage
Output Voltage
90 VAC / 60 Hz
38 mW
19.27 V
115 VAC / 60 Hz
42 mW
19.27 V
230 VAC / 50 Hz
76 mW
19.27 V
264 VAC / 50 Hz
85 mW
19.27 V
Figure 8. Input Wattage Curve
© 2014 Fairchild Semiconductor Corporation 12 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.2. Startup Time
Test Condition:
Measure the time from the AC plug-in to nominal output voltage build-up at full load condition.
Table 6. Test Results
Input Voltage
Startup Time
Specification
90 VAC / 60 Hz
1.8 s
<2 sec
264 VAC / 50 Hz
0.537 s
<2 sec
Waveforms:
Figure 9. C1[VIN], C4[VO], 90 VAC / 60 Hz
Figure 10. C1[VIN], C4[VO]. 264 VAC / 50 Hz
9.3. Hold-up Time
Test Condition
Set output at maximum load. Measure the time interval between AC off and output voltage
falling to lower limit of rated value. The AC waveform should be off at zero degree.
Table 7. Test Results
Input Voltage
Hold-up Time
90 VAC / 60 Hz
7.9 ms
115 VAC / 60 Hz
15.1 ms
230 VAC / 50 Hz
83.9 ms
264 VAC / 50 Hz
119 ms
Waveforms:
Figure 11. C1[VIN], C4[Vo], 90 VAC / 60 Hz
Figure 12. C1[VIN], C4[Vo], 264 VAC /
50 Hz
© 2014 Fairchild Semiconductor Corporation 13 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.4. Input Current
Test Condition:
Measure the AC input current at maximum output loading, where the maximum input power
occurs.
Table 8. Test Results
Input Voltage
Input Current
Specification
90 VAC / 60 Hz
964 mA
264 VAC / 50 Hz
445 mA
9.5. DC Output Rising Time
Test Condition:
Measure the time interval between 10% to 90% of the output voltage during startup.
Table 9. Test Results
Input Voltage
Minimum Load
Full Load
Specification
90 VAC/60 Hz
4.32 ms
5.87 ms
<20 ms
264 VAC/50 Hz
3.7 ms
5.06 ms
Waveforms:
Figure 13. C4[VO], 90 VAC/60 Hz, Minimum Load
Figure 14. C4[VO], 90 VAC/60 Hz, Full Load
Figure 15. C4[VO], 264 VAC/50 Hz, Minimum Load
Figure 16. C4[VO] 264 VAC/50 Hz, Full Load
© 2014 Fairchild Semiconductor Corporation 14 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.6. Dynamic Response
Test Condition
Dynamic loading (20%~80%), 50% duty cycle (5 ms), 2.5 A/µsec rise/fall time. Measured at
PCB end.
Table 10. Test Results
Input Voltage
Overshoot
Undershoot
Specification
115 VAC/60 Hz
262 mV
102 mV
230 VAC/50 Hz
301 mV
128 mV
Waveforms:
Figure 17. C4[VO], 115 VAC / 60 Hz
Figure 18. C4[VO], 230 VAC / 50 Hz
9.7. Output Ripple & Noise
Test Condition
Measure the output voltage ripple at full load condition at EVB end with 10 µF electrolytic
capacitor in parallel with 0.1 µF MLCC.
Table 11. Test Results
Input Voltage
Full Load
Specification
90 VAC / 60 Hz
345 mVP-P
115 VAC / 60 Hz
312 mVP-P
230 VAC / 50 Hz
292 mVP-P
264 VAC / 50 Hz
299 mVP-P
Waveforms:
Figure 19. C4[VO], 90 VAC / 60 Hz
Figure 20. C4[VO], 264 VAC / 50 Hz
© 2014 Fairchild Semiconductor Corporation 15 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.8. VDD Voltage Level
Test Condition
Measure VDD voltage at minimum, maximum loading and close over current protection point.
Table 12. Test Result
Input Voltage
Minimum
load
Maximum load
Near OCP
Specification
90 VAC / 60 Hz
12.45 V
14.8 V
16.4 V
< 22.5 V
264 VAC / 50 Hz
12.6 V
14 V
154 V
Waveforms:
9.9. Short-Circuit Protection (SCP)
Test Condition
Short output terminal, then the controller should enter hiccup mode protection with less than
10 ms.
Table 13. Test Results with Input Power
Maximum Output Load
Minimum Output Load
Specification
90 VAC / 60 Hz
7.18 ms
7.31 ms
< 10 ms
264 VAC / 50 Hz
7.04 ms
7.14 ms
Waveforms:
Figure 23. C1[FB], C2[GATE], C3[VO], C4[VDD],
90 VAC/60 Hz
Figure 24. C1[FB], C2[GATE], C3[VO], C4[VDD],
264 VAC/50 Hz
Figure 21. C2[VCS ], C3[VDD] 90 VAC /
60 Hz & Max. Load
Figure 22. C2[VCS ], C3[VDD] 264 VAC /
50 Hz & Max. Load
© 2014 Fairchild Semiconductor Corporation 16 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.10. Overload Protection (OLP)
Test Condition:
Increase output loading gradually to trigger OLP and measure the debounce time.
Table 14. Test Results
Input Voltage
Minimum Load
Maximum Load
Specification
90 VAC / 60 Hz
63.8 ms
64.1 ms
54 ms < tD-OLP <66 ms
264 VAC / 50 Hz
63.5 ms
60.1 ms
Waveforms:
Figure 25. C1[FB], C2[GATE], C3[VO], C4[VDD],
90 VAC/60 Hz
Figure 26. C1[FB], C2[GATE], C3[VO], C4[VDD],
264 VAC/50 Hz
9.11. Voltage Stress on MOSFET & Rectifiers
Test Condition
Measure the voltage and current stress on MOSFET and secondary rectifier under below the
conditions where the maximum voltage stress occurs.
Table 15. Test Results
90 VAC/ 60 Hz
264 VAC/ 50 Hz
Specification
Full Load
Full Load
Normal
MOSFET
322 V
582 V
VDS<600 V
VD<100 V
Rectifier
55 V
86 V
Short Circuit
MOSFET
294 V
502 V
Rectifier
28 V
93 V
Waveform:
Figure 27. C1[VAK], C4[VDS] 264 VAC/50 Hz, Full Load
© 2014 Fairchild Semiconductor Corporation 17 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.12. Line & Load Regulation
Test Condition
Measure the line/load regulation according universal input and minimum to maximum loading.
Table 16. Test Results
Input Voltage
Output Voltage at
Maximum Loading
Output Voltage at
Minimum Loading
Load
Regulation
Specification
90 VAC / 60 Hz
19.11 V
19.276 V
0.8%
< ±5%
115 VAC / 60 Hz
19.09 V
19.276 V
0.9%
132 VAC / 60 Hz
19.09 V
19.274 V
0.9%
180 VAC / 50 Hz
19.10 V
19.274 V
0.8%
230 VAC / 50 Hz
19.08 V
19.272 V
0.9%
264 VAC / 50 Hz
19.09 V
19.27 V
0.9%
Line Regulation
0.13%
0.031%
9.13. Efficiency
Test Condition
Measure the efficiency at universal input voltage and maximum loading.
Table 17. Test Results
Figure 28. 4 Points Efficiency Curve
Input Voltage
Output
Voltage
Output
Current
Input
Wattage
Efficiency
Average
Efficiency
90 VAC / 60 Hz
19.224 V
0.52 A
11.26 W
88.78%
88.42%
19.178 V
1.042 A
22.53 W
88.70%
19.134 V
1.571 A
33.97 W
88.49%
19.108 V
2.109 A
45.94 W
87.72%
115 VAC / 60 Hz
19.216 V
0.52 A
11.29 W
88.51%
89.09%
19.188 V
1.044 A
22.36 W
89.59%
19.132 V
1.571 A
33.61 W
89.43%
19.088 V
2.109 A
45.32 W
88.83%
230 VAC / 50 Hz
19.226 V
0.52 A
11.29 W
88.55%
89.16%
19.184 V
1.044 A
22.39 W
89.45%
19.138 V
1.571 A
33.66 W
89.32%
19.094 V
2.109 A
45.08 W
89.33%
264 VAC / 50 Hz
19.222 V
0.52 A
11.34 W
88.14%
88.85%
19.174 V
1.044 A
22.61 W
88.53%
19.134 V
1.571 A
33.7 W
89.2%
19.128 V
2.094 A
44.74 W
89.53%
115VAC 60Hz (89.09% avg)
230VAC 50Hz (89.16% avg)
85.29% (Energy star V2.0)
© 2014 Fairchild Semiconductor Corporation 18 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.14. Over-Current Protection( OCP )
Test Condition
Increase output loading current gradually and measure the output maximum current.
Table 18. Test Results
Input Voltage
Over Current Protection
Specification
90 VAC / 60 Hz
2.95 A
115 VAC / 60 Hz
3.02 A
230 VAC / 50 Hz
2.93 A
264 VAC / 50 Hz
2.96 A
Curve:
Figure 29. Output Current Protection Curve
© 2014 Fairchild Semiconductor Corporation 19 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.15. Conducted Electromagnetic Interference (EMI)
Test Condition
Frequency Range: 150 kHz – 30 MHz, Probe: 2-Line-LISN ENV216
Signal Path: Receiver-2-Line-LISN ENV216, Detectors: Average
Output Load: 9.025
Test Results:
Figure 30. Line: 115 VAC / 60 Hz
Figure 31. Neutral: 115 VAC / 60 Hz
Figure 32. Line: 230 VAC / 50 Hz
Figure 33. Neutral: 230 VAC / 50 Hz
9.16. Surge Test
Test Condition
230 VAC / 50 Hz, maximum load.
N-PE / L-PE: (Positive & Negative) 1 kV ~ 4 kV, Phase 0°, 90°, 180°, 270°.
L-N: (Positive & Negative) 500 V ~ 1 kV, Phase 0°, 90°, 180°, 270°.
Table 19. Test Results
L-PE
N-PE
L-N
Result
±4.4 kV
±4.4 kV
±2 kV
1 5 0 k H z
3 0 M H z
1 P K
M A X H
2 A V
M A X H
S G L
T D F
6 D B
d B µ V
d B µ V
R B W
9 k H z
M T
1 s
P R E A M P
O F F
A t t
1 0 d B
P R N
1 M H z
1 0 M H z
0
10
20
30
40
50
60
70
80
90
100
E N 5 5 0 2 2 Q
E N 5 5 0 2 2 A
D a t e : 2 0 . O C T . 2 0 0 9 1 7 : 2 7 : 4 7
1 5 0 k H z
3 0 M H z
1 P K
M A X H
2 A V
M A X H
S G L
T D F
6 D B
d B µ V
d B µ V
R B W
9 k H z
M T
1 s
P R E A M P
O F F
A t t
1 0 d B
P R N
1 M H z
1 0 M H z
0
10
20
30
40
50
60
70
80
90
100
E N 5 5 0 2 2 Q
E N 5 5 0 2 2 A
D a t e : 2 0 . O C T . 2 0 0 9 1 7 : 3 1 : 3 6
1 5 0 k H z
3 0 M H z
1 P K
M A X H
2 A V
M A X H
S G L
T D F
6 D B
d B µ V
d B µ V
R B W
9 k H z
M T
1 s
P R E A M P
O F F
A t t
1 0 d B
P R N
1 M H z
1 0 M H z
0
10
20
30
40
50
60
70
80
90
100
E N 5 5 0 2 2 Q
E N 5 5 0 2 2 A
D a t e : 2 0 . O C T . 2 0 0 9 1 7 : 2 3 : 3 4
1 5 0 k H z
3 0 M H z
T D F
6 D B
d B µ V
d B µ V
1 P K
M A X H
2 A V
M A X H
S G L
R B W
9 k H z
M T
1 s
P R E A M P
O F F
A t t
1 0 d B
P R N
1 M H z
1 0 M H z
0
10
20
30
40
50
60
70
80
90
100
E N 5 5 0 2 2 Q
E N 5 5 0 2 2 A
D a t e : 2 0 . O C T . 2 0 0 9 1 7 : 1 9 : 5 3
© 2014 Fairchild Semiconductor Corporation 20 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
9.17. ESD Test
Test Condition:
230 VAC / 50 Hz, maximum load.
Air discharge: (Positive & Negative) 8 kV ~ 16 kV, 20 times per level.
Contact discharge: (Positive & Negative) 4 kV ~ 8 kV, 20 times per level.
Table 20. Test Result
Air Discharge
Contact Discharge
Result
±16.5 kV
±8.8 kV
© 2014 Fairchild Semiconductor Corporation 21 FEBFAN6602RM6X_CH10U40A • Rev. 1.1
10. Revision History
Rev.
Date
Description
1.0
January 2015
Initial Release
1.1
June 2015
BOM updated, Figure 7 replaced, Table 2, 3,
WARNING AND DISCLAIMER
Replace components on the Evaluation Board only with those parts shown on the parts list (or Bill of Materials) in the Users’ Guide. Contact an
authorized Fairchild representative with any questions.
This board is intended to be used by certified professionals, in a lab environment, following proper safety procedures. Use at your own risk. The
Evaluation board (or kit) is for demonstration purposes only and neither the Board nor this User’s Guide constitute a sales contract or create any kind
of warranty, whether express or implied, as to the applications or products involved. Fairchild warrantees that its products meet Fairchild’s published
specifications, but does not guarantee that its products work in any specific application. Fairchild reserves the right to make changes without notice to
any products described herein to improve reliability, function, or design. Either the applicable sales contract signed by Fairchild and Buyer or, if no
contract exists, Fairchild’s standard Terms and Conditions on the back of Fairchild invoices, govern the terms of sale of the products described herein.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO
IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR
USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR
THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
are intended for surgical implant into the body, or (b) support or
sustain life, or (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website,
www.fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing
counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation,
substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to
protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts
either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy
either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for
handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized
Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
EXPORT COMPLIANCE STATEMENT
These commodities, technology, or software were exported from the United States in accordance with the Export Administration Regulations for the
ultimate destination listed on the commercial invoice. Diversion contrary to U.S. law is prohibited.
U.S. origin products and products made with U.S. origin technology are subject to U.S Re-export laws. In the event of re-export, the user will be
responsible to ensure the appropriate U.S. export regulations are followed.