5
TransGuard®
AVX Multilayer Ceramic Transient Voltage Suppressors
VOLTAGES = 3.3, 5.6, 9, 14, 18, 26 OR 30 VDC
0603 SURFACE MOUNT
Dimensions: Actual Size:
Length 1.6 ± 0.15mm (0.063" ± 0.006")
Width 0.80 ± 0.15mm (0.032" ± 0.006")
Thickness 0.9mm Max. (0.035")
Termination Band Width 0.35 ± 0.15mm (0.014" ± 0.006")
Termination Separation 0.7mm Min. (0.028")
Termination Finish X = Pt/Pd/Ag (Non-Plated)
P = Ni/Sn Alloy (Plated)
AVXWorking Breakdown Clamping Peak Transient
Part Number Voltage Voltage Voltage Current Energy Capacitance Inductance
Symbol VWM VBVCIpeak Etrans CL
Units Volts Volts Volts Amp Joules pF nH
(max.) (max.) (max.) (max.) (typ.) (typ.)
Test Condition <50µA 1mA DC 8/20µS† 8/20µs 10/1000µS 0.5Vrms @: di/dt = 100mA/nS
1kHz 1 MHz
VC060303A100 _ _ 3.3# 4.1 - 6.0 10 30 0.1 1800 1230 <1.0
VC060305A150 _ _ 5.6 7.6 - 9.3 15.5 30 0.1 1000 825 <1.0
VC060309A200 _ _ 9.0 11.0 - 14.0 20 30 0.1 650 550 <1.0
VC060314A300 _ _ 14.0 16.5 - 20.3 30 30 0.1 500 424 <1.0
VC060318A400 _ _ 18.0 22.9 - 28.0 40 30 0.1 275 225 <1.0
VC060326A580 _ _ 26.0 31.0 - 38.0 58 30 0.1 200 160 <1.0
VC060330A650 _ _ 30.0 37.0 - 46.0 65 30 0.1 175 150 <1.0
VC06LC18X500 _ _ See pages 14-15 for specification and performance details.
VWM—Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50µA leakage current
VB—Voltage across the device measured at 1mA DC current
VC—Maximum peak voltage across the varistor measured at a specified pulse current and waveform
†Transient Energy Rating Pulse Current & Waveform
0.1 Joule 2A 8/20µS
Ipeak—Maximum peak current which may be applied with the specified waveform without device failure
Etran—Maximum energy which may be dissipated with the specified waveform without device failure
C—Device capacitance measured with zero volt bias 0.5Vrms and 1kHz
L—Device inductance measured with a current edge rate of 100 mA/nS
Dimensions: Millimeters (Inches)
#Test condition <100µA
Termination Finish: X = Pt/Pd/Ag (Non-Plated)
P = Ni/Sn Alloy (Plated)
Packaging: (Pcs/Reel) see page 2