TransGuard(R) AVX Multilayer Ceramic Transient Voltage Suppressors VOLTAGES = 3.3, 5.6, 9, 14, 18, 26 OR 30 VDC 0603 SURFACE MOUNT Dimensions: Actual Size: Length Width Thickness Termination Band Width Termination Separation Termination Finish AVX Part Number 1.6 0.15mm (0.063" 0.006") 0.80 0.15mm (0.032" 0.006") 0.9mm Max. (0.035") 0.35 0.15mm (0.014" 0.006") 0.7mm Min. (0.028") X = Pt/Pd/Ag (Non-Plated) P = Ni/Sn Alloy (Plated) Working Breakdown Clamping Voltage Voltage Voltage Peak Current Transient Energy Capacitance Inductance Symbol VWM VB VC Ipeak Etrans C L Units Volts (max.) Volts Volts (max.) Amp (max.) Joules (max.) pF (typ.) nH (typ.) Test Condition <50A 1mA DC 8/20S 8/20s 10/1000S 0.5Vrms @: 1kHz 1 MHz di/dt = 100mA/nS VC060303A100 _ _ 3.3# 4.1 - 6.0 10 30 0.1 1800 1230 <1.0 VC060305A150 _ _ 5.6 7.6 - 9.3 15.5 30 0.1 1000 825 <1.0 VC060309A200 _ _ 9.0 11.0 - 14.0 20 30 0.1 650 550 <1.0 VC060314A300 _ _ 14.0 16.5 - 20.3 30 30 0.1 500 424 <1.0 VC060318A400 _ _ 18.0 22.9 - 28.0 40 30 0.1 275 225 <1.0 VC060326A580 _ _ 26.0 31.0 - 38.0 58 30 0.1 200 160 <1.0 VC060330A650 _ _ 30.0 37.0 - 46.0 65 30 0.1 175 150 <1.0 VC06LC18X500 _ _ See pages 14-15 for specification and performance details. Termination Finish: X = Pt/Pd/Ag (Non-Plated) P = Ni/Sn Alloy (Plated) Packaging: (Pcs/Reel) see page 2 VWM--Maximum steady-state DC operating voltage the varistor can maintain and not exceed 50A leakage current VB--Voltage across the device measured at 1mA DC current VC--Maximum peak voltage across the varistor measured at a specified pulse current and waveform Transient Energy Rating 0.1 Joule Pulse Current & Waveform 2A 8/20S Ipeak--Maximum peak current which may be applied with the specified waveform without device failure Etran--Maximum energy which may be dissipated with the specified waveform without device failure C--Device capacitance measured with zero volt bias 0.5Vrms and 1kHz L--Device inductance measured with a current edge rate of 100 mA/nS Dimensions: Millimeters (Inches) #Test condition <100A 5