SUNON [seectricatton FOR avrnovat) CUSTOMER DESCRIPTION AXIAL AC FAN DIMENSIONS 80X80X38 mm MODEL SF11580A P/N 1083HBL.GN SUNON SPEC. NO. : Y401009 APPROVAL NO. APPROVED BY (AUTHORIZED) SPEC.NO Y401009 ISSUE DATE [01.06.2005 DRAWN | March 1/6 | CHECKED Juan 0,7 |APPROVED / EDITION 0 ) ( REVISION DATE E.SPEC LS0411012 GHRER SEOs RAT SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG IST RD., KAOHSIUNG, TAIWAN, R. O.C. TEL:886-7-7163069(41 LINES) FAX:886-7-7163086~89SUNON AXIAL AC FAN MODEL : SF11580A P/N >: 1083HBL.GN | CHARACTERISTICS | 1. Motor Design : Reliable Shaded-Pole Motor Construction. 2. Insulation Resistance : 500Megohms minimum at 500 VDC. 3. Dielectric Strength > 1500 VAC for one second . 4. Motor Protection : Impedance protected. 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with the microphone at a distance of one meter from the fan intake. 6. Tolerance >: +15% on rated power and current. 7. Air Performance : Measured by a double chamber. The values are recorded when the fan speed has stabilized at rated voltage. FE EET ENE RA] SPEC.NO Y401009 | REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE] 01.06.2005 JE DITION |o MACHINE INDUSTRY CO.,LTD.[ pAGE | 2 OF 8SUNON | [SPECIFICATIONS | MODEL: SF11580A P/N : 1083 HBL.GN 1-1. Rated Voltage 1-2. Operating Voltage Range 1-3. Starting Voltage 1-4. Rated Speed 1-5. Air Delivery 1-6. Static Pressure 1-7. Rated Current 1-8. Rated Power 1-9. Noise Level 1-10. Direction of Rotation 1-11. Motor Protection 1-12. Operating Temperature 1-13. Storage Temperature 1-14. Bearing System 1-15. Weight 1-16. Safety 1-17. Vibration : 115 VAC 50/60 HZ : 85-125 VAC : 85 VAC(25 deg. C POWER ON/OFF) : 2400/2850 RPM + 10% : 24/31 CFM : 0.13/0.19 Inch-E20 : 0.15/0.13 AMP >: 14/12 WATTS : 32/36.5 dB(A) : Counter-clockwise viewed from front of fan blade : Impedance Protected. : -10 to +70 deg. C : -40 to +70 deg. C : Precision ball bearing system : 340 : UL/CSA/TUV/CE Approvals : Vibration of acceleration 1.5G and frequency 5~50~5Hz is applied in all 3 directions(X,Y,Z), in cycles of 1 minute each, for a total vibration time of 30 minutes. ete Fabs Loe ieta IRA SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD SPEC. NO. Y401009 =|REVISION DATE ISSUE DATE | 01. 06.2005 [E DITION ]0 PAGE 3 OF 8SUNON MODEL : SF11580A P/N : 1O83HBL.GN PERFORMANCE CURVES STATIC PRESSURE mm-H20 Inch-H20 + 6 0.20 4 4: 0.10 + 2 9 CFM 0 0 0.57 1.14 | | | m/min EB RET SEA SRA] SPEC.NO. | 401009 |REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE | 01. 06.2005 IE DITION |0 MACHINE INDUSTRY CO., LTD] PAGE 4 OF 8SUNON MATERIAL 2. Material 2-1. Frame : DIE-CAST ALUMINUM 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Lead Wire : UL3266,24 awg | DIMENSIONS | ROlAT ON AIR FLOW UL3266 #24AWG L it GROUND LUG 43.9 H m nm . oO + 0 Ie : 71.540.3 Sa O45 3.7+0.3 80 0.5 58.5 0.5 1. Air Flow Direction: Toward label side. 2. Best Mounting Direction: Any orientation. UNITS : mm fat HE BS ET SER YP A _ | SPEC.NO. | Y401009 [REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE | 01. 06.2005 JE DITION {0 MACHINE INDUSTRY CO., LTD] PAGE 5 OF 8SUNON I . Safety 1.SUNON will not guarantee this product if your application exceeds the limitations outlined in this specification. 2.There is no thermo-protector installed in this product, such as thermo-fuse, or current-fuse or thermo-protector. There may be smoking, ignition, or electric shock by insulation degradation in cases of motor lock, motor lead short circuit, overload, over voltage, and/or other failure. Please add the protection circuit to your product. 3.There is no reverse-connection prevention diode of VDC (+) and GND (- ) installed in this product. Therefore, if VDC( +) and GND(- ) are reverse connected, it may cause smoking, ignition, and/or destruction, although these conditions may not manifest immediately. We recommend that a protection device be installed on your product when there is a possibility of reverse- connection. 4.Please verify that this product is being installed and used in compliance with all safety standards. Please inform SUNON of any safety concerns prior to releasing your product to production. 5.Please handle and install this product carefully. Hitting or dropping this product may cause damage. 6.Please do not damage this product including coil and lead wires while installing or wiring. There may be smoking or fire. PLUS BE Pe TEM BR] SPEC.NO Y401009 |REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE} 01. 06.2005 |E DITION 10 MACHINE INDUSTRY CO.,LTD.| PAGE 6 OF 8SUNON I . Specification modification 1.SUNON offers engineering assistance on fan installation and cooling system design. 2.Any change to the parameters specified in this document will be determined by mutual agreement between both parties. Parameters which are not specified in this specification will be identical to the final sample which has been approved by your company. 3.Product will be shipped in accordance with this specification unless SUNON has been previously notified of parameters requiring exception. 4.Parameters modified by mutual consent will be incorporated in this specification. 5.Please notify SUNON in advance of any modification to your product or new application for this fan which may require a review of this specification. Fee FS se LS (7g BRS SPEC.NO Y401009 REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE 01. 06. 2005 EDITION MACHINE INDUSTRY CO.,LTD.| PAGE 7 OF 8- SUNON Il . Other 1.When building your device, please examine thoroughly any variation of EMC, temperature rise, life data, quality, ete. of this product by shock/drop/vibration testing, etc. If there are any problems or accidents in connection with this product, it should be mutually discussed and examined. 2.Fan holders or bearings may be damaged if touched with fingers or other objects. Additionally, static electricity (ESD) may damage the internal circuits. Please handle this product carefully. 3.Please avoid operating SUNONs product in poisonous material (organic silicon, cyanogens, formalin, phenol, etc.) or corrosive gas environments (H2S, SO2, NO2, C12, ete). 4.SUNON does not warrant performance safety against accidents caused by dust, water, droplets, dew, bugs, ete. 5.Please advise us in advance if you require documents for export. 6.[mproper mounting may cause harsh resonance, vibration, and noise. Please mount securely. 7.Safety is a top priority. Please furnish guard accessories to prevent injury to personnel. 8.Unless otherwise noted, all tests are conducted at 25C ambient temperature and 65% relative humidity. . 9.Always ensure that fans are stored according to the storage temperatures specified. Do not store in a high humidity environment. If the fans are stored for more than 6 months, SUNON recommends functional testing before using. 10.SUNON reserves the right to use components with equivalent specifications from multiple sources. FEE RE SEIS IRA SPEC.NO Y401009 _|REVISION DATE SUNONWEALTH ELECTRIC ISSUE DATE] 01.06.2005 |E DITION |0 MACHINE INDUSTRY CO.,LTD.| PAGE | 8 OF 8