PA08M
PA08MU 1
PA08M/883
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent Current IQ 25°C ±100V VIN = 0, AV = 100 8.5 mA
1 Input Offset Voltage VOS 25°C ±100V VIN = 0, AV = 100 2 mV
1 Input Offset Voltage VOS 25°C ±15V VIN = 0, AV = 100 3.7 mV
1 Input Offset Voltage VOS 25°C ±150V VIN = 0, AV = 100 3 mV
1 Input Bias Current, +IN +IB 25°C ±100V VIN = 0 50 pA
1 Input Bias Current, –IN –IB 25°C ±100V VIN = 0 50 pA
1 Input Offset Current IOS 25°C ±100V VIN = 0 50 pA
3 Quiescent Current IQ –55°C ±100V VIN = 0, AV = 100 9.5 mA
3 Input Offset Voltage VOS –55°C ±100V VIN = 0, AV = 100 4.4 mV
3 Input Offset Voltage VOS –55°C ±15V VIN = 0, AV = 100 6.1 mV
3 Input Offset Voltage VOS –55°C ±150V VIN = 0, AV = 100 5.4 mV
3 Input Bias Current, +IN +IB –55°C ±100V VIN = 0 50 pA
3 Input BiasCurrent, –IN –IB –55°C ±100V VIN = 0 50 pA
3 Input Offset Current IOS –55°C ±100V VIN = 0 50 pA
2 Quiescent Current IQ 125°C ±100V VIN = 0, AV = 100 12 mA
2 Input Offset Voltage VOS 125°C ±100V VIN = 0, AV = 100 5 mV
2 Input Offset Voltage VOS 125°C ±15V VIN = 0, AV = 100 6.7 mV
2 Input Offset Voltage VOS 125°C ±150V VIN = 0, AV = 100 6 mV
2 Input Bias Current, +IN +IB 125°C ±100V VIN = 0 10 nA
2 Input Bias Current, –IN –IB 125°C ±100V VIN = 0 10 nA
2 Input Offset Current IOS 125°C ±100V VIN = 0 10 nA
4 Output Voltage, IO = 150mA VO 25°C ±31V RL = 100Ω 15 V
4 Output Voltage, IO = 29mA VO 25°C ±150V RL = 5K 145 V
4 Output Voltage, IO = 80mA VO 25°C ± 90V RL = 1K 80 V
4 Current Limits ICL 25°C ±30V RL = 100Ω 75 125 mA
4 Stability/Noise EN 25°C ±100V RL = 5K, AV = 1, CL = 1nF 1 mV
4 Slew Rate SR 25°C ±100V RL = 5K 20 100 V/µs
4 Open Loop Gain AOL 25°C ±100V RL = 5K, F = 10Hz 96 dB
4 Common Mode Rejection CMR 25°C ±32.5V RL = 5K, F = DC, VCM = ±22.5V 90 dB
6 Output Voltage, IO = 100mA VO –55°C ±31V RL =100Ω 10 V
6 Output Voltage, IO = 29mA VO –55°C ±150V RL = 5K 145 V
6 Output Voltage, IO = 70mA VO –55°C ±90V RL = 1K 70 V
6 Stability/Noise EN –55°C ±100V RL = 5K, AV = 1, CL = 1nF 1 mV
6 Slew Rate SR –55°C ±100V RL = 5K 20 100 V/µs
6 Open Loop Gain AOL –55°C ±100V RL = 5K, F = 10Hz 96 dB
6 Common Mode Rejection CMR –55°C ±32.5V RL = 5K, F = DC, VCM = ±22.5V 90 dB
5 Output Voltage, IO = 150mA VO 125°C ±31V RL = 100Ω 15 V
5 Output Voltage, IO = 29mA VO 125°C ±150V RL = 5K 145 V
5 Output Voltage, IO = 80mA VO 125°C ±90V RL = 1K 80 V
5 Stability/Noise EN 125°C ±100V RL = 5K, AV = 1, CL = 1nF 1 mV
5 Slew Rate SR 125°C ±100V RL = 5K 20 100 V/µs
5 Open Loop Gain AOL 125°C ±100V RL = 5K, F = 10Hz 96 dB
5 Common Mode Rejection CMR 125°C ±32.5V RL = 5K, F = DC, VCM = ±22.5V 90 dB
100KΩ
5Ω
100KΩ
+50V
–50V
5
6
2
1
8
3
60Ω
** *
U.U.T
4
*
5Ω
BURN IN CIRCUIT * These components are used to stabilize device due to poor
high frequency characteristics of burn in board.
** Input signals are calculated to result in internal power dis-
sipation of approximately 2.1W at case temperature = 125°C.
Table 4 Group A Inspection
PA08M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA08MU REVM
PA08M
2 PA08MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA08MU REVM
