STB12NM50N,STD12NM50N,STI12NM50N STF12NM50N, STP12NM50N N-channel 500 V, 0.29 , 11 A MDmeshTM II Power MOSFET TO-220 - DPAK - D2PAK - I2PAK - TO-220FP Features Type VDSS (@Tjmax) RDS(on) max ID 3 STB12NM50N 550 V 0.38 11 A STD12NM50N 550 V 0.38 11 A STI12NM50N 550 V 0.38 11 A STF12NM50N 550 V 0.38 11 A (1) STP12NM50N 550 V 0.38 11 A 1 3 12 2 IPAK TO-220 3 1 DPAK 3 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Application 3 1 1 DPAK Figure 1. 2 TO-220FP Internal schematic diagram Switching applications Description This series of devices is realized with the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Table 1. Device summary Order codes Marking Package Packaging STB12NM50N B12NM50N DPAK Tape and reel STD12NM50N D12NM50N DPAK Tape and reel STI12NM50N I12NM50N IPAK Tube STF12NM50N F12NM50N TO-220FP Tube STP12NM50N P12NM50N TO-220 Tube July 2008 Rev 8 1/19 www.st.com 19 Contents STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/19 ................................................ 9 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220 / IPAK TO-220FP DPAK / DPAK Unit VDS Drain-source voltage (VGS = 0) 500 V VGS Gate-source voltage 25 V ID Drain current (continuous) at TC = 25 C 11 11(1) A ID Drain current (continuous) at TC=100 C 6.7 6.7(1) A Drain current (pulsed) 44 44 (1) A Total dissipation at TC = 25 C 100 25 W IDM (2) PTOT dv/dt(3) Peak diode recovery voltage slope 15 VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 C) Tstg Storage temperature TJ V/ns -- 2500 V -55 to 150 C 150 C Max. operating junction temperature 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 11A, di/dt 400A/s, VDD =80%V(BR)DSS Table 3. Thermal data Value Symbol Parameter Unit TO-220 IPAK DPAK DPAK TO-220FP Rthj-case Thermal resistance junctioncase max Rthj-amb Thermal resistance junction-amb max Rthj-pcb Thermal resistance junction-pcb max Tl Table 4. Symbol 1.25 62.5 -- Maximum lead temperature for soldering purposes -- 5 C/W -- -- 62.5 C/W 50 30 -- C/W 300 C Avalanche characteristics Parameter IAS Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) EAS Single pulse avalanche energy (starting Tj=25C, Id=Ias, Vdd=50V) Value Unit 5 A 350 mJ 3/19 Electrical characteristics 2 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Electrical characteristics (TCASE=25 C unless otherwise specified) Table 5. Symbol V(BR)DSS dv/dt(1) On/off states Parameter Drain-source breakdown voltage Test conditions ID = 1 mA, VGS= 0 Min Typ. Max 500 Peak diode recovery voltage VDD=400 V, ID=11 A, slope VGS=10 V Unit V 44 VDS = max rating, V/ns VDS = max rating@125 C 1 100 A A Gate body leakage current (VDS = 0) VGS = 20 V 100 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 A 3 4 V RDS(on) Static drain-source on resistance VGS= 10 V, ID= 5.5 A 0.29 0.38 Typ. Max Unit IDSS Zero gate voltage drain current (VGS = 0) IGSS 2 1. Characteristic value at turn off inductive load Table 6. Symbol gfs (1) Ciss Coss Crss Dynamic Parameter Qg Min Forward transconductance VDS =15 V, ID = 5.5 A 8 S Input capacitance Output capacitance Reverse transfer capacitance VDS =50 V, f=1 MHz, VGS=0 940 100 10 pF pF pF VGS=0, VDS =0 to 400 V 130 pF VDD=400 V, ID = 11 A 30 6 15 nC nC nC 4.5 Coss eq(2) Equivalent output capacitance Qgd Total gate charge Gate-source charge Gate-drain charge Rg Gate input resistance Qgs Test conditions VGS =10 V (see Figure 17) f=1 MHz Gate DC Bias=0 test signal level=20 mV open drain 1. Pulsed: pulse duration=300 s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/19 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Table 7. Switching times Symbol Parameter td(on) tr td(off) tf Table 8. Symbol Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Electrical characteristics Min Typ. Max 15 15 60 14 VDD=250 V, ID= 5.5 A, RG=4.7 , VGS=10 V (see Figure 16) Unit ns ns ns ns Source drain diode Max Unit Source-drain current 11 A ISDM(1) Source-drain current (pulsed) 44 A VSD(2) Forward on voltage ISD=11 A, VGS=0 1.3 V Reverse recovery time Reverse recovery charge Reverse recovery current di/dt = 100 A/s, (see Figure 18) ISD trr Qrr IRRM trr Qrr IRRM Parameter Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions ISD=11 A, VDD=100 V ISD=11 A, di/dt = 100 A/s, VDD=100 V, Tj=150 C (see Figure 18) Min Typ. 340 3.5 20 ns C A 420 4 20 ns C A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300 s, duty cycle 1.5% 5/19 Electrical characteristics STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220/ DPAK/ DPAK / IPAK Figure 3. Thermal impedance for TO-220/ DPAK/ DPAK / IPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Output characteristics Figure 7. Transfer characteristics 6/19 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Figure 8. Transconductance Figure 9. Electrical characteristics Static drain-source on resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on resistance vs temperature 7/19 Electrical characteristics STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Figure 14. Source-drain diode forward characteristics 8/19 Figure 15. Normalized BVDSS vs temperature STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N 3 Test circuit Test circuit Figure 16. Switching times test circuit for resistive load Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped Inductive load test switching and diode recovery times circuit Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform 9/19 Package mechanical data 4 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/19 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 11/19 Package mechanical data STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N TO-220FP mechanical data mm. Dim. Min. A 4.40 inch Typ Max. Min. 4.60 0.173 Typ. 0.181 Max. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.017 0.027 F 0.75 1.00 0.030 0.039 F1 1.15 1.50 0.045 0.067 F2 1.15 1.50 0.045 0.067 G 4.95 5.20 0.195 0.204 G1 2.40 2.70 0.094 0.106 H 10 10.40 0.393 L2 16 0.409 0.630 28.6 30.6 1.126 L4 9.80 10.60 0.385 1.204 0.417 L5 2.9 3.6 0.114 0.141 L6 15.90 16.40 0.626 0.645 L7 9 9.30 0.354 0.366 Dia 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 Dia F F1 L7 L2 L5 1 2 3 L4 7012510-I 12/19 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Package mechanical data IPAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 13/19 Package mechanical data STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N DPAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8 0 0.4 0 0079457_M 14/19 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Package mechanical data TO-252 (DPAK) mechanical data DIM. mm. min. typ max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 D1 E 6.20 5.10 6.40 E1 6.60 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 L4 0.80 0.60 R V2 1 0.20 0o 8o 0068772_G 15/19 Packaging mechanical data 5 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 16/19 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 17/19 Revision history 6 STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Revision history Table 9. 18/19 Document revision history Date Revision Changes 24-May-2005 1 Initial release 10-Jun-2005 2 Inserted new row in Table 7.: Switching times 28-Sep-2005 3 Document status promoted from preliminary data to datasheet. 14-Oct-2005 4 Modified Figure 6, Figure 9 06-Mar-2006 5 Modified Figure 8 29-Mar-2006 6 Modified value on Table 5. 14-Nov-2006 7 Document reformatted no content change 24-Jul-2008 8 - Added IPAK; - Table 3: Thermal data has been updated; - Figure 11: Capacitance variations changed. STB12NM50N - STD12NM50N - STI/F12NM50N - STP12NM50N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 19/19