GN Series
• Current rating 10, 15 and 30 Amps
• Output voltage 3-60, 1-50, 1-100 and 1-200 VDC
• Transistor and Mosfet Output
• Available with or without IP20 touch-safe cover
• LED Input Status Indicator
• UL Approved, CE Compliant to EN60950-1
• Improved SEMS screw and washer
• Redesigned housing with anti-rotation barriers
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
DC Output SSRs
For Generation 3 datasheet click here
AVAILABLE OPTIONS
Required for valid part number
For options only and not required for valid part number
Touch Safe Cover
4: Not included (IP00)
7: Included (IP20)
Rated Voltage &
Load Current
5: 3-60 VDC, 10 Amps (with output type 7 only)
5: 1-200 VDC, 10 Amps
6: 1-100 VDC, 15 Amps
7: 1-50 VDC, 30 Amps
Series
8413 7 54
Control
Voltage
0:3.5-32 VDC
Output Type
7: Transistor
8: MOSFET
U0 H
Thermal Pad
Blank: Not included
H: Included
PRODUCT SELECTION
Control Voltage 10 A 15 A
3-32 VDC 84134750
3.5-32 VDC 84134850 84134860
30 A
84134870
With output type 8 only
OUTPUT SPECIFICATIONS (1)
Description 8413x850
Recommended Operating Voltage [Vdc] 1-150
Absolute Maximum Rating [Vdc] 200
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1
8413x750
3-48
60
1
8413x870
1-36
50
0.1
8413x860
1-72
100
0.1
Maximum Load Current [Adc] (2) 10
Minimum Load Current [mA] 100
Maximum On-State Voltage Drop @ Rated Current [Vdc] 1.4
Maximum Surge Current [Adc] (10msec) 15
Maximum On-State Resistance [RDS-ON] [Ohms] N/A
Thermal Resistance Junction to Case (Rjc) [°C/W] 2
Minimum Heat Sink for Rated Current @ 40°C [°C/W] 5
Maximum Pulse Width Modulation Frequency [Hz] (3) 1500
10
0.1
2.1
50
0.21
1.25
1.5
2000
30
0.1
0.8
72
0.03
1.5
2
1200
15
0.1
0.8
50
0.05
2.1
2
2500
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
INPUT SPECIFICATIONS (1)
Description 8413x750
Control Voltage Range 3-32 VDC
Maximum Reverse Voltage -32 VDC
Minimum Turn-On Voltage 3 VDC
Must Turn-Off Voltage 1 VDC
Minimum Input Current (for on-state) 9 mA
Maximum Input Current [mA] 14.5 mA
Nominal Input Impedance [Ohms] Current Regulated
Maximum Turn-On Time [μsec] 100
Maximum Turn-Off Time [μsec] 200
8413x8xx
3.5-32 VDC
-32 VDC
3.5 VDC (4)
1 VDC
11 mA
15 mA
75
50
GENERAL SPECIFICATIONS (1)
ParametersDescription
Dielectric Strength, Input to Output (50/60Hz) 3700 Vrms
Dielectric Strength, Input/Output to Ground (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range (5) -40 to 100 °C
Ambient Storage Temperature Range -40 to 100 °C
Weight (typical) 2.46 oz (70 g)
Housing Material UL94 V-0
Baseplate Material Aluminum
Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7
Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2
LED Input Status Indicator Green
MTBF (Mean Time Between Failures) at 40°C ambient temperature (6) 11,641,553 hours (1,328 years)
MTBF (Mean Time Between Failures) at 60°C ambient temperature (6) 7,210,376 hours (823 years)
Humidity per IEC60068-2-78 93% non-condensing
GENERAL NOTES
For additional information or specific questions, contact Crydom Technical Support.
(1) All parameters at 25°C unless otherwise specified.
(2) Heat sinking required, see derating curves.
(3) 8 VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current.
(4) Increase minimum voltage by 1V for operations from -20 to -40°C.
(5) Maximum ambient temperature for 8413x750 is 80°C, decrease maximun control voltage 1.35V/°C above 80°C ambient temperature.
(6) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
MECHANICAL SPECIFICATIONS (1)
Tolerances: ±0.02 in / 0.5 mm
All dimensions are in: inches [millimeters]
1.1
[27.9]
0.49
[12.4]
Mounting
Hole/Slot
0.19 [4.9]
DIA.
0.89
[22.6]
1.88
[47.6]
1.7
[43.2]
2.25
[57.3]
1.0
[25.4]
1.75
[44.5]
Screw Termination, IP00
Mounting
Hole/Slot
0.19 [4.9]
DIA.
2.25
[57.3]
1.88
[47.6]
1.7
[43.2]
2.32
[58.8]
1.0
[25.4]
1.75
[44.5]
1.22
[30.9]
Screw Termination, IP20
1.10
[27.9]
0.49
[12.4]
EQUIVALENT CIRCUIT BLOCK DIAGRAMS
Recommended Wire Sizes
Terminals Wire Size
(Solid / Stranded)
Wire Pull-Out
Strength (lb)[N]
Input
Output
24 AWG (0.2 mm2) / 0.2 [minimum]
2 x 12 AWG (3.3 mm2) / 3.3 [maximum]
20 AWG (0.5 mm2) / 0.518 [minimum]
2 x 10 AWG (5.3 mm2) / 5.3
2 x 8 AWG (8.4 mm2) / 8.4 [maximum]
10 [44.5]
90 [400]
30 [133]
110 [490]
90 [400]
WIRING DIAGRAM
1
4
+2
+3
SOLID STATE RELA Y
OUTPUT
INPUT
Load
+
-
V
+
-
V
+
1
4
+2
+3
SOLID STATE RELA Y
OUTPUT
INPUT
-
+
V
+
-
V
Load
+
* Inductive loads must be diode suppresed.
* *
0
2
4
6
8
10
12
14
0 5 10 15 20 25 30 35
Input Current vs Input Voltage
Standard Regulated DC Input
Input Current (mA)
DC Input Voltage
-DC
+DC
-DC
Trigger
Circuit
Control
Circuit
+DC
4
3
1
2
4
3
1
2
Current
Limiter
INPUT
OUTPUT
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
THERMAL DERATE INFORMATION
(i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air.
0
2
4
6
8
10
20 30 40 50 60 70 80
Ambient Temperature (ºC)
Load Current (Amps)
8413x750
5ºC/W No Heat Sink (*)
0
5
10
15
20 30 40 50 60 70 80 90 100
Ambient Temperature (ºC)
Load Current (Amps)
8413x860
2ºC/W 3ºC/W 5ºC/W
0
5
10
15
20
25
30
20 30 40 50 60 70 80 90 100
Ambient Temperature (ºC)
Load Current (Amps)
8413x870
2ºC/W 3ºC/W 5ºC/W No Heat Sink (*)
0
2
4
6
8
10
20 30 40 50 60 70 80 90 100
Ambient Temperature (ºC)
Load Current (Amps)
8413x850
2ºC/W 3ºC/W 5ºC/W
SURGE CURRENT INFORMATION
0
5
10
15
20
0.1 1 10 100 1000
Surge Current (Amp)
8413x750
0
10
20
30
40
50
60
70
0.1 1 10 100 1000
Surge Current (Amp)
8413x850
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
AGENCY APPROVALS
EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
E46203
Surge Duration (msec) Surge Duration (msec)
0
10
20
30
40
50
60
70
80
0.1 1 10 100 1000
Surge Current (Amp)
Surge Duration (msec)
8413x860
0
25
50
75
100
125
150
0.1 1 10 100 1000
Surge Current (Amp)
Surge Duration (msec)
8413x870
Duty Factor 10%
Duty Factor 20%
Duty Factor 50%
Period
Pulse
Width
the curve according duty factor and pulse duration as following.
(ii) for Repetitive Surge Pulse Tc=40°C ;Tj 130°C
Duty Factor
=
Pulse Width
Period
x100 (%)
(i) for Single Surge Pulse Tc=40°C ;Tj 175°C
For Pulse Width Modulation applications select
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
Recommended Accessories
Cover Hardware
Kit
Heat Sink
Part No.
Thermal Resistance
[ºC/W]
Lug Terminal Thermal Pad
KS101 HK1
HK4
HS501DR
HS301 / HS301DR
HS251
HS201 / HS201DR
HS202 / HS202DR
HS172
HS151 / HS151DR
HS122 / HS122DR
HS103 / HS103DR
HS101
HS073
HS072
HS053
HS033
HS023
5.0
3.0
2.5
2.0
2.0
1.7
1.5
1.2
1.0
1.0
0.7
0.7
0.5
0.36
0.25
TRM1
TRM6
HSP-1
HSP-2
ACCESSORIES
Rev. 092816
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
•Disconnect all
power before
installing or
working with
this equipment.
•Verify all
connections
and replace all
covers before
turning on
power.
Failure to follow
these
instructions will
result in death
or serious injury.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
•Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
con este equipo.
•Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
el equipo.
El
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
RISQUE DE
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•Eteindre
toutes les
sources
d'énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
•Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
•Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
Gerät Arbeiten
durchführen
•Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
Abdeckungen
ersetzen.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
Verletzungen
führen.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSI
ONE.
•Spenga tutta
l'alimentazion
e che fornisce
questa
apparecchiatu
ra prima del
lavorare a questa
apparecchiatu ra
•Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima della
rotazione
sull'alimentazi one
L'omissione di
seguire queste
istruz ioni
provocherà la
morte o di
lesioni serie
存在电击、
爆炸或电弧
闪烁危险
•
在操作此设
备之前请先
关闭电源。
若不遵守这些说明，
可能会导致严重的
人身伤害甚至死亡。
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
• The product's side panels may be hot, allow
the product to cool before touching.
• Follow proper mounting instructions including
torque values.
• Do not allow liquids or foreign objects to enter
this product.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
• Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
• Respecter les consignes de montage, et
notamment les couples de serrage.
• Ne pas laisser pénétrer de liquide ni de corps
étrangers à l'intérieur du produit.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
• Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
• Beachten Sie die Montageanweisungen,
• Führen Sie keine Flüssigkeiten oder
Fremdkörper in das Produkt ein.
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
• Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
• Respetar las instrucciones de montaje, y en
particular los pares de apretado.
• No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l'incolumità personale o
danni alle apparecchiature.
RISCHIO DI DANNI MATERIALI E D'INVOLUCRO
CALDO
• I pannelli laterali dell'apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
• Seguire le istruzioni di montaggio corrette.
• Non far entrare liquidi o oggetti estranei in questo
apparecchio.
如不能正确执行这些操作说明，
极有可能造成严重人体伤害或者设备的损坏。
材料损坏和高温外壳的危险性
• 产品的一侧面板可能很热，在其冷却前请
不要触碰。
• 遵照正确的安装说明，包括扭矩值。
• 请勿让液体及其他异物进入本产品。
Do not forget to visit us at: www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
Datasheet
Panel Mount
ANNEX - ENVIROMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb) (Hg) (Cd) Chromium
(Cr (VI))
biphenyls
(PBB)
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 - 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006,
电子信息产品污染控制标识要求。
有毒有害物质或元素件部
名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚
(Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE)
半导体芯片
焊接点
50
