HMC567LC5 v04.0514 Typical Applications Features The HMC567LC5 is ideal for: Conversion Gain: 10 dB * Point-to-Point and Point-to-Multi-Point Radio Image Rejection: 35 dB * EW & ELINT LO to RF Isolation: 54 dB Noise Figure: 2.5 dB Input IP3: +1.5 dBm TE 32 Lead 5x5mm SMT Package: 25mm Functional Diagram General Description B SO LE The HMC567LC5 is a compact GaAs MCM I/Q downconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 10 dB with a noise figure of 2.5 dB and 35 dB of image rejection across the frequency band. The HMC567LC5 utilizes an LNA followed by an image reject mixer which is driven by an LO buffer amplifier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90 hybrid is needed to select the required sideband. The HMC567LC5 is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 C, IF = 100 MHz, LO = 0 dBm, VddLO = 5.0 Vdc, VddRF = 3.0 Vdc* O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz Parameter Min. Typ. Max. Units Frequency Range, RF 7-9 GHz Frequency Range, LO 3.5 - 12.5 GHz Frequency Range, IF DC - 3.5 GHz 10 dB 2.5 dB Conversion Gain (As IRM) 7 Noise Figure Image Rejection 23 1 dB Compression (Input) LO to RF Isolation 43 LO to IF Isolation 20 IP3 (Input) Amplitude Balance 35 dB -4 dBm 54 dB 32 dB +1.5 dBm 0.75 dB Phase Balance 3 Deg Total Supply Current 160 195 mA *Data taken as IRM with external IF Hybrid 1 Information furnished by Analogand Devices believedorders: to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, and Drive, to placeChelmsford, orders: AnalogMA Devices, Inc., For price, delivery to isplace Hittite Elizabeth 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order 781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz Data Taken As IRM With External IF Hybrid Image Rejection vs. Temperature 50 20 45 IMAGE REJECTION (dB) 10 +25C +85C -40C 0 -5 35 30 25 +25C +85C -40C 20 15 10 -10 6 7 8 9 6 10 7 9 10 LE Conversion Gain vs. LO Drive Return Loss 0 20 15 10 5 B SO -5 -4dBm -2dBm 0dBm +2dBm +4dBm 0 -5 -10 6 7 8 9 -10 -15 LO RF -20 -25 3 10 5 7 RF FREQUENCY (GHz) 9 11 13 FREQUENCY (GHz) Input IP3 vs. LO Drive O Input P1dB vs. Temperature 0 6 5 -2 4 -4 IP3 (dBm) P1dB (dBm) 8 RF FREQUENCY (GHz) RF FREQUENCY (GHz) CONVERSION GAIN (dB) 40 TE 5 RETURN LOSS (dB) CONVERSION GAIN (dB) 15 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Conversion Gain vs. Temperature -6 +25C +85C -40C -8 3 2 1 0 -10 LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm -1 -2 -12 6 7 8 RF FREQUENCY (GHz) 9 10 6 7 8 9 10 RF FREQUENCY (GHz) Information furnished by Analogand Devices believedorders: to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery to isplace Hittite Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 One Order On-line at www.hittite.com Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Support: Phone: 978-250-3343 or apps@hittite.com Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of their respective owners. 2 HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz Quadrature Channel Data Taken Without IF Hybrid IF Bandwidth* 40 10 30 RF/IF1 RESPONSE (dB) -10 RF/IF2 LO/IF2 -20 -30 10 0 TE LO/IF1 -40 -10 -20 -50 -30 LO/RF -40 0.5 -60 6 7 8 9 10 1 1.5 2 2.5 3 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 2 LE RF FREQUENCY (GHz) Phase Balance vs. LO Drive 20 1.5 15 LO = -4 dBm LO = -2 dBm LO = 0 dBm LO = +2 dBm LO = +4 dBm 1 0.5 0 -0.5 -1 -1.5 -2 6 B SO AMPLITUDE BALANCE (dB) RETURN LOSS CONVERSION GAIN 20 7 8 9 PHASE BALANCE (degrees) ISOLATION (dB) 0 5 0 -5 -10 -15 -20 10 O Noise Figure vs. LO Drive, LO Frequency = 7.0 GHz 6 7 8 9 10 9 10 RF FREQUENCY (GHz) Noise Figure vs. LO Drive, IF Frequency = 100 MHz 8 6 5 -4dBm -2dBm 0dBm +2dBm +4dBm NOISE FIGURE (dB) 6 LO = -4 dBm LO = -2 dBm LO = +0 dBm LO = +2 dBm LO = +4 dBm 10 RF FREQUENCY (GHz) NOISE FIGURE (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Isolations 4 2 -4dBm -2dBm 0dBm +2dBm +4dBm 4 3 2 1 0 0.5 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 4 0 6 7 8 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid, LO frequency fixed at 7.0 GHz and RF varied 3 Information furnished by Analog Devices is believed to be accurate andMicrowave reliable. However, no For price,2delivery, and Drive, to placeChelmsford, orders: AnalogMA Devices, For price, delivery and to place orders: Hittite Corporation, Elizabeth 01824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 978-250-3343 or apps@hittite.com Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz Absolute Maximum Ratings nLO mRF 0 1 2 RF +5 dBm 3 4 LO Drive +20 dBm xx 15 48 42 60 VddRF / VddLO 4.0V / 5.5V 13 0 29 48 66 Channel Temperature 150C 2 63 53 59 59 84 508 mW 3 79 93 83 52 76 Continuous Pdiss (T=85C) (derate 9.56 mW/C above 85C) 4 104 103 104 107 97 Thermal Resistance (RTH) (channel to package bottom) 77 C/W Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C RF = 7.6 GHz @ -20 dBm LO = 7.5 GHz @ +4 dBm Data taken without IF hybrid All values in dBc below IF power level. TE 0 1 O B SO LE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog and Devices believed orders: to be accurate and reliable. However, Corporation, no For price, delivery, and toDrive, place Chelmsford, orders: Analog MA Devices, Inc., For price, delivery toisplace Hittite Microwave 2 Elizabeth 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that mayPhone: result from its use. Specifications subject to change without notice. No 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at *www.hittite.com Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of theirSupport: respective owners. Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT MxN Spurious Outputs 4 HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz TE LE B SO NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Outline Drawing Package Information Part Number Package Body Material Lead Finish HMC567LC5 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H567 XXXX [1] Max peak reflow temperature of 260 C [2] 4-Digit lot number XXXX 5 Information furnished by Analog Devices is believed to be accurate andMicrowave reliable. However, no For price,2delivery, and Drive, to placeChelmsford, orders: AnalogMA Devices, For price, delivery and to place orders: Hittite Corporation, Elizabeth 01824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Phone: 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz Pin Descriptions Description Interface Schematic 1, 5, 7 - 9, 13 - 16, 22 - 27, 29 - 32 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 2, 4, 10, 12, 17, 19, 21 GND These pins and ground paddle must be connected to RF/DC ground. 3 RF This pin is AC coupled and matched to 50 Ohms. 6 VddLO Power supply for LO amplifier. 100 mA typical, 120 mA maximum. 28 VddRF Power supply for RF LNA. 60 mA typical, 75 mA maximum. 18 IF2 20 IF1 LE This pin is DC coupled for applications not requiring operation to DC. This port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. For operation to DC, this pin must not sink / source more than 3 mA of current or part non-function and possible failure will result. This pin is AC coupled and matched to 50 Ohms. B SO 11 LO O Typical Application MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Function TE Pin Number Note: LSB and USB is determined by GND on Hybrid Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks areApplication the property of their respective owners. Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC567LC5 v04.0514 GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz TE LE B SO List of Materials for Evaluation PCB 111239 [1] O MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Evaluation PCB Item Description C1, C2 Capacitor 0402, Pkg. 100pF C4, C5 Capacitor 0402, Pkg. 1000pF C7, C8 Capacitor, Case A, 2.2uF *(Polarity) J1, J2 PCB Mount SMA RF Connector, SRI J3, J4 PCB Mount SMA Connector, Johnson J5 DC Pin, VD2 = VddRF J6 DC Pin, VD3 = VddLO VC1, VD1 N/C U1 HMC567LC5 PCB [2] 111225 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery and to place orders: Hittite Microwave Corporation, Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC567LC5 v04.0514 Information furnished by Analogand Devices believedorders: to be accurate and Microwave reliable. However,Corporation, no For price, 2delivery, and Drive, to placeChelmsford, orders: AnalogMA Devices, Inc., For price, delivery to isplace Hittite Elizabeth 01824 responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order 781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT O B SO LE TE GaAs MMIC I/Q DOWNCONVERTER 7 - 9 GHz 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: 111239-HMC567LC5 HMC567LC5TR HMC567LC5 HMC567LC5TR-R5