Top View Bottom View 48.00mm [1.890"] 25.65mm [1.010"] 2.54mm [0.100"] 1.14mm [0.045"] 43.00mm [1.693"] 0.91mm [0.036"] 16.46mm [0.648"] 0.51mm [0.020"] O 1.70mm(x3) O 3.73mm (x6) 3.68mm [0.145"] 12.78mm [0.503"] DDR RAM Shunt Not included surface mount interface LS-BGA136C-61 Side View 1 1 2 3.94mm [0.155"] 2 assembled 5.37mm [0.211"] 3 SF-BGA136C-B-62 0.80mm [0.031"] 3 Target PCB Substrate: 1.59mm 0.18mm [0.0625" 0.007"] per IPC 4101/21/26/83/98, Td>=345C Pins: material- Brass Alloy 360 1/2 hard; finish- 0.25m [10"] Au over 1.27m [50"] Ni (min.). Pins: shell material- Brass Alloy 360 1/2 hard; finish0.25m [10"] Au over 1.27m [50"] Ni (min.). Contact material- BeCu; finish 0.25m [10"] Au over 2.54m [100"] Ni (min. ). Description: BGA Tek Logic Analyzer adapter. 136 pin, 0.8mm pitch BGA surface mount land pattern to Tek P6860 mictor connectors. The adapter uses BGA surface mount foot to interface with the target PCB. Every signal goes thru termination resistor per Tektronix LA. Tolerances: diameters 0.03mm [0.001"], PCB perimeters 0.254mm [0.010"], PCB thicknesses 0.18mm [0.007"], pitches (from true position) 0.08mm [0.003"], all other tolerances 0.13mm [0.005"] unless stated otherwise. Materials and specifications are subject to change without notice. LA-BGA136C-GDDR3-01 Drawing (c) 2007 IRONWOOD ELECTRONICS, INC. 11351 Rupp Dr. Ste 400, Burnsville, MN 55337 Tele: (952) 229-8200 www.ironwoodelectronics.com Status: Released Scale: 1:0.75 Rev: A Drawing: J. Glab Date: 12/05/07 File: LA-BGA136C-GDDR3-01 Dwg.mcd Modified: