5.37mm [0.211"]
assembled
Target PCB
0.80mm
[0.031"]
1
DDR RAM
surface mount interface
Side View
0.51mm
[0.020"]
0.91mm
[0.036"]
16.46mm
[0.648"]
12.78mm
[0.503"]
LS-BGA136C-61
SF-BGA136C-B-62
2.54mm
[0.100"]
Ø 3.73mm (x6)
Ø 1.70mm(x3)3.68mm
[0.145"]
1.14mm
[0.045"]
25.65mm
[1.010"]
Not included
Shunt
43.00mm
[1.693"]
48.00mm
[1.890"]
3.94mm
[0.155"]
Top View
Description: BGA Tek Logic Analyzer adapter.
136 pin, 0.8mm pitch BGA surface mount land pattern to Tek P6860 mictor connectors. The adapter uses BGA
surface mount foot to interface with the target PCB. Every signal goes thru termination resistor per Tektronix LA.
Status: Released
Drawing: J. Glab
Scale: 1:0.75 Rev: A
Date: 12/05/07
Modified:
File: LA-BGA136C-GDDR3-01 Dwg.mcd
LA-BGA136C-GDDR3-01 Drawing
© 2007 IRONWOOD ELECTRONIC S, INC.
11351 Rupp Dr. Ste 400, Burnsville, MN 55337
Tele: (952) 229-8200
www.ironwoodelectronics.com
Tolerances: diameters ±0.03mm [±0.001"], PCB perimeters ±0.254mm [±0.010"], PCB thicknesses ±0.18mm [±0.0 07"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Substrate: 1.59mm ±0.18mm
[0.0625" ±0.007"] per IPC
4101/21/26/83/98, Td>=345C
Pins: material- Brass Alloy
360 1/2 hard; finish- 0.25µm
[10µ"] Au over 1.27µm [50µ"]
Ni (min.).
2
1
2
Pins: shell material- Brass
Alloy 360 1/2 hard; f inish-
0.25µm [10µ"] Au over 1.27µm
[50µ"] Ni (min.). Contact
material- BeCu; f inish 0.25µm
[10µ"] Au over 2.54µm
[100µ"] Ni (min. ).
3
3
Bottom View
