SF2042B (R) * * * * * Designed for 802.16 and WIMAX Receiver IF Application Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Differential Input and Output Complies with Directive 2002/95/EC (RoHS) Pb 456.00 MHz SAW Filter Absolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband +13 dBm Max. DC voltage between any 2 terminals 30 VDC Storage Temperature Range -40 to +85 Suitable for lead-free soldering - Max Soldering Profile C SMP-03 260C for 30 s Electrical Characteristics Characteristic Nominal Center Frequency @ 25C Insertion Loss @ 25C Differential Impedance line-to-line Passband 1dB Passband 3dB Group Delay Absolute Group Delay Variation; CF 6.4 MHz Return Loss Rejection DC to 256 MHz 256 to 360 MHz 360 to 416 416 to 443 MHz 470 to 656 MHz 656 to 946 MHz Equivalent Circuit Input 320 ohm Output 400 ohm Center Frequency Temperature Coefficient Maximum Peak RF Input Power Temperature Operating Storage Case Style Lid Symbolization (YY=year, WW=week, S=shift) Sym CF Notes 10 1 1 1, 10 1, 10 1 1 1 1 1 1 1 1 10 Min 6.4 7.5 8 30 36 36 25 32 30 Typ 456.00 12 200 7.5 8.8 50 15 55 50 40 35 35 50 5.1 4.5 -15 Max 14 Units MHz dB Ohms MHz 150 13 -40 85 -40 85 SMP-03 5 x 7 mm Nominal Footprint RFM SF2042B YYWWS nsec dB dB pF pF kHz/C dBm C Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 using 50 / 200 baluns and measured with 50 network analyzer. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. (c)Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. The center of the passbands will move with ambient temperature. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2042B-072406 Page 1 of 3 456.00 MHz SAW Filter SMP-03 Case 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension A B C D E H J K P Recommended PCB Footprint Min 6.80 4.80 .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 Materials Solder Pad Termination Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Body Al2O3 Ceramic Pb Free Electrical Connections Connection Port 1 Port 2 Terminals Input or Return 10 Return or Input 1 Output or Return 5 Return or Output 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot C B E H H A J D P K RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2042B-072406 Page 2 of 3 456.00 MHz SAW Filter Tape and Reel Specifications Quantity Per Reel Inches millimeters 7 178 500 13 330 2000 "B" REF. 100 REF. "B " Nominal Size See Detail "A" 13. 0 12.0 .2 20 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Tolerance Ao 5.5 mm 0.1mm Bo 7.5 mm 0.1mm Ko 2.0 mm 0.1mm Pitch 8.0 mm 0.1mm W 16.0 mm 0.2mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2042B-072406 Page 3 of 3