MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
1-3
62034 1N649X
JAN QUALIFIED FAULT INDICATORS
1N650X
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• MIL-PRF-19500
• Hermetically sealed
• Pin compatible with Dialight 547 and 555 series
• Available with Internal Current Regulation (5 to 30
VDC)
• Wide operating temperature range (-65°C to
+100°C)
• Ceramic Insulator for Side by Side Mounting
Applications:
• P.C. Board Fault Indicator
• Logic Status Indicator
• Binary Data Display
• ON-OFF Indicator
• Right Angle Viewing
DESCRIPTION
The 1N649X, 1N650X series indicator lamps are useful in a variety of applications such as fault indicators for trouble
shooting at the P.C. board level. The red and yellow fault indicators utilize a high efficiency GaAsP on GaP LED, while the
green indicator utilizes a GaP on GaP LED. Each type uses a colored diffused plastic lens over a glass window. All are
hermetically sealed and available JANTX screened.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature......................................................................................................................................... -65°C to +100°C
Operating Temperature ..................................................................................................................................... -65°C to +100°C
Lead Solder Temperature (1/16” [1.6mm] from case for 10 seconds) .............................................................................. 260°C
Reverse Voltage ......................................................................................................................................................................5V
Power Dissipation (Derate at the rate of 1.31 mW/°C above 25°C). ...............................................................................105mW
Forward Current (For part numbers 1N6493, 94, 95 and 1N6500, 01, 02)........................................................................35mA
Forward Voltage (For part numbers 1N6497, 98, 99 and 1N6503, 04, 05)....................................................................... 30Vdc
Package Dimensions Schematic Diagram
.005 [0.130]TYP
.125 [3.18]
TYP
.125 [3.18]
.145 [3.68]
.385[9.78]
.445 [11.30]
.045 [1.14]
TYP
.079 [2.01]
.082 [2.08]
+-
C
L
ALL DIM ENS IO NS A R E IN IN C HES [M ILL IM ETERS ] ALL DIM EN SIO N S ARE IN INCH E S [M ILLIM ETERS ]
.300 [7.62]
TYP
+-
CERAMIC
INS U L A TO R
.312 [7.92]
.328 [8.33]
CERAMIC
INS U L A TO R
SCHEMATIC
DIAGRAM
STANDARD VERSION
CURRENT REGULATED VERSION
.385[9.78]
.445 [11.30]
.125 [3.18]
.145 [3.68]
.005 [0.130]TYP
.125 [3.18]
TYP
L
C
.045 [1.14]
TYP
.079 [2.01]
.082 [2.08]
.020 [0.51]
.022 [0.56]
.018 [0.46]
.022 [0.56]
.015 [0.38]
.045 [1.14]
0.093 [2.36]
0.099 [2.51]
.112 [2.84]
.128 [3.25]
.100 [2.54]TYP
.020 [0.51]
.022 [0.56]
.015 [0.38]
.045 [1.14]
.018 [0.46]
.022 [0.56]
0.093 [2.36]
0.099 [2.51]
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
1-4
62034 1N649X
1N650X JAN QUALIFIED HERMETIC P.C. BOARD MOUNT FAULT INDICATORS
*ELECTRICAL/OPTICAL CHARACTERISTICS TA=25°C
PART NUMBER TEST CONDITIONS PARAMETER LIMITS
IFVFPEAK λIV1θ = 0 IV2 θ = 15 VFIFC
mA VDC TYP. MIN. MIN. MAX. MIN. – MAX. MAX.
1N6493/1N6500 20 635nm 1mcd .5mcd. 3V 100pf
1N6497/1N6503 5-30 635nm .5mcd .25mcd. 3.5-7.5 500pf
1N6494/1N6501 20 585nm 1mcd .5mcd. 3V 100pf
1N6498/1N6504 5-30 585nm .5mcd .25mcd. 3.5-7.5 500pf
1N6495/1N6502 25 570nm .8mcd .4mcd. 3V 100pf
1N6499/1N6505 5-30 570nm .4mcd .2mcd. 3.5-7.5 500pf
* JEDEC REGISTERED DATA
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Forward Current, LED ONLY IF20 35 mA
Forward Voltage, CURRENT LIMITED VF210 V
Operating Temperature TA-65 +100 °C
MECHANICAL/OPTICAL CHARACTERISTICS
PART NUMBER PART TYPE PIN SPACING COLOR TYPE
JAN or JANTX1N6493 1N6493 .100” RED LED ONLY
JAN or JANTX1N6497 1N6497 .100” RED CURRENT LIMITED
JAN or JANTX1N6494 1N6494 .100” YELLOW LED ONLY
JAN or JANTX1N6498 1N6498 .100” YELLOW CURRENT LIMITED
JAN or JANTX1N6495 1N6495 .100” GREEN LED ONLY
JAN or JANTX1N6499 1N6499 .100” GREEN CURRENT LIMITED
JAN or JANTX1N6500 1N6500 .300” RED LED ONLY
JAN or JANTX1N6503 1N6503 .300” RED CURRENT LIMITED
JAN or JANTX1N6501 1N6501 .300” YELLOW LED ONLY
JAN or JANTX1N6504 1N6504 .300” YELLOW CURRENT LIMITED
JAN or JANTX1N6502 1N6502 .300” GREEN LED ONLY
JAN or JANTX1N6505 1N6505 .300” GREEN CURRENT LIMITED
