APX9141 High Sensitivity Hall Effect Sensor IC with Reverse Voltage Protection Features * * * * * * * * General Description On-Chip Reverse Voltage Protection The APX9141 is an integrated Hall Effect Sensor IC de- On-Chip Hall Sensor signed for electric commutation of DC brushless motor applications. The APX9141 still can operate at as low as 3 Low Operating Supply Voltage: 3 V volts. The APX9141 is available in low cost TO-92M4 package with 3 different magnetic ranks. High Output Sinking Capability up to 400mA Versatile Sensitivity and Hysteresis Setting Reliable and Rugged Pin Configuration 4 Pin TO-92M Package Build-In Output Zener Diodes to Clamp the Peak Output Voltage * APX9141 High Sensitivity Hall Effect Sensor IC: 2 : DO 3 : DOB 50G, 65G, and 90G * Front View 1 : VDD Lead Free and Green Devices Available (RoHS 4 : GND Compliant) 1 Applications * * * * 2 3 4 Brushless DC Fan Revolution Counting Brushless DC Motor Speed Measurement Ordering and Marking Information Magnetic Rank AT : | Bop , Brp | < 50 Gauss A : | Bop , Brp | < 65 Gauss; B : | Bop , Brp | < 90 Gauss Package Code E : TO - 92M4 Temperature Range E : - 20 to 85 oC Handling Code PB : Plastic Bag Assembly Material G : Halogen and Lead Free Device APX9141 Assembly Material Handling Code Temperature Range Package Code Magnetic Rank APX9141 E : APX 9141 XXXXX XXXXX - Date Code Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines "Green" to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. A.10 - Mar., 2009 1 www.anpec.com.tw APX9141 Absolute Maximum Ratings Symbol (TA = 25C unless otherwise noted) (Note 1) Parameter Rating Unit VDD Supply Voltage 20 V -VDD Reverse Voltage -20 V VBD Output Breakdown Voltage 55 V IDD Supply Current 15 mA Output Current - 400 600 800 500 PD Continuous Hold Current Peak (Start Up) Maximum Power Dissipation TJ Maximum Junction Temperature IOUT mA mW 150 TSTG Storage Temperature Range TSOL Soldering Temperature, 10 Seconds C -65 to 150 260 Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Symbol JA JC Parameter Typical Value Thermal Resistance-Junction to Ambient (Note2) TO-92M4 Thermal Resistance-Junction to Case (Note2) TO-92M4 Unit 210 C/W 100 C/W Note 2: JA and JC are measured with the component mounted on a high effective thermal conductivity test board in free air. Recommended Operating Conditions Symbol Parameter Range Unit TA Ambient Temperature -20 to 85 C TJ Junction Temperature -20 to 125 C Electrical Characteristics (TA = 25C, VDD=12V unless otherwise noted) APX9141 Symbol Parameter VDD Supply Voltage VSAT Output Saturation Voltage VClamp IDD ILeak a Unit Min. Typ. Max. Operating 3 - 20 IOUT=400mA, B>Bop - 600 800 IOUT=200mA, B>Bop - 250 350 - 30 - V V mV Clamp Output Voltage Supply Current VDD=20V, Output Open - 10 15 mA Output Leakage Current VOUT=20V, VDD=20V, B2000 260 C 245 C 245 C 3 Reliability Test Program Test item SOLDERABILITY HOLT PCT TCT ESD Latch-Up Method JESD-22, B102 JESD-22, A108 JESD-22, A102 JESD-22, A104 MIL-STD-883-3015.7 JESD 78 Description 5 Sec, 245C 1000 Hrs, Bias @ 125C 168 Hrs, 100%RH, 2atm, 121C 500 Cycles, -65C~150C VHBM2KV, VMM200V 10ms, 1tr100mA Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 2F, No. 11, Lane 218, Sec 2 Jhongsing Rd., Sindian City, Taipei County 23146, Taiwan Tel : 886-2-2910-3838 Fax : 886-2-2917-3838 Copyright ANPEC Electronics Corp. Rev. A.10 - Mar., 2009 8 www.anpec.com.tw