Product data sheet Characteristics LP4K0601BW3 TeSys K contactor - 3P(3 NO) - AC-3 - <= 440 V 6 A - 24 V DC coil Jul 5, 2013 Commercial Status Commercialised Range of product TeSys K Product or component type Contactor Device short name LP4K Contactor application Motor control Utilisation category AC-3 AC-4 Poles description 3P Power pole contact composition 3 NO [Ue] rated operational voltage <= 690 V AC 50/60 Hz for signalling circuit 690 V AC 50/60 Hz for power circuit [Ie] rated operational current 6 A at <= 440 V AC AC-3 for power circuit Motor power kW 3 kW at 660...690 V AC 50/60 Hz 3 kW at 500...600 V AC 50/60 Hz 3 kW at 480 V AC 50/60 Hz 3 kW at 440 V AC 50/60 Hz 2.2 kW at 380...415 V AC 50/60 Hz 1.5 kW at 220...230 V AC 50/60 Hz Control circuit type DC low consumption Control circuit voltage 24 V DC Auxiliary contact composition 1 NC [Uimp] rated impulse withstand voltage 8 kV Overvoltage category III [Ith] conventional free air thermal current 10 A at <= 50 C for signalling circuit 20 A at <= 50 C for power circuit Irms rated making capacity 110 A AC for signalling circuit conforming to IEC 60947 110 A AC for power circuit conforming to IEC 60947 110 A AC for power circuit conforming to NF C 63-110 Rated breaking capacity 70 A at 660...690 V conforming to IEC 60947 110 A at 380...400 V conforming to IEC 60947 110 A at 220...230 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 110 A at 415 V conforming to IEC 60947 [Icw] rated short-time withstand current 20 A <= 50 C >= 15 s power circuit 110 A 100 ms signalling circuit 90 A 500 ms signalling circuit 80 A 1 s signalling circuit 40 A <= 50 C 3 min power circuit 45 A <= 50 C 1 min power circuit 60 A <= 50 C 30 s power circuit 80 A <= 50 C 10 s power circuit 85 A <= 50 C 5 s power circuit 90 A <= 50 C 1 s power circuit Associated fuse rating 10 A gG for signalling circuit conforming to VDE 0660 10 A gG for signalling circuit conforming to IEC 60947 25 A aM for power circuit 25 A gG at <= 440 V for power circuit Average impedance 3 mOhm at 50 Hz - Ith 20 A for power circuit 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Main [Ui] rated insulation voltage 600 V for signalling circuit conforming to CSA C22.2 No 14 600 V for power circuit conforming to CSA C22.2 No 14 600 V for signalling circuit conforming to UL 508 690 V for signalling circuit conforming to IEC 60947-5-1 690 V for signalling circuit conforming to IEC 60947-4-1 690 V for power circuit conforming to IEC 60947-4-1 600 V for power circuit conforming to UL 508 Electrical durability 1.3 Mcycles 6 A AC-3 at Ue <= 440 V Mounting support Plate Rail Standards BS 5424 IEC 60947 NF C 63-110 VDE 0660 Product certifications CSA UL Connections - terminals Screw clamp terminals 2 cable(s) 0.34...1.5 mm cable stiffness: flexible - with cable end Screw clamp terminals 2 cable(s) 0.75...4 mm - cable stiffness: flexible - without cable end Screw clamp terminals 2 cable(s) 1.5...4 mm - cable stiffness: solid Screw clamp terminals 1 cable(s) 0.34...2.5 mm cable stiffness: flexible - with cable end Screw clamp terminals 1 cable(s) 0.75...4 mm - cable stiffness: flexible - without cable end Screw clamp terminals 1 cable(s) 1.5...4 mm - cable stiffness: solid Tightening torque 1.3 N.m - on screw clamp terminals - with screwdriver flat O 6 mm 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 Operating time 30...40 ms coil energisation and NO closing 10...20 ms coil de-energisation and NO opening Safety reliability level B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1 Mechanical durability 30 Mcycles Operating rate 3600 cyc/h Complementary Coil technology Built-in bidirectional peak limiting diode suppressor Control circuit voltage limits 0.1...0.7 Uc at <= 50 C drop-out 0.7...1.30 Uc at <= 50 C operational Inrush power in W 1.8 W at 20 C Hold-in power consumption in W 1.8 W at 20 C Heat dissipation 1.8 W Auxiliary contacts type Type instantaneous (1 NC) Minimum switching current 5 mA for signalling circuit Minimum switching voltage 17 V for signalling circuit Non overlap distance 0.5 mm Insulation resistance > 10 MOhm for signalling circuit Environment IP degree of protection IP2x conforming to VDE 0106 Protective treatment TC conforming to DIN 50016 TC conforming to IEC 60068 Ambient air temperature for operation -25...50 C Ambient air temperature for storage -50...80 C Operating altitude 2000 m without derating in temperature 2 Flame retardance Requirement 2 conforming to NF F 16-102 Requirement 2 conforming to NF F 16-101 V1 conforming to UL 94 Mechanical robustness Shocks contactor closed, on Y axis 10 Gn for 11 ms IEC 60068-2-27 Shocks contactor closed, on X axis 15 Gn for 11 ms IEC 60068-2-27 Shocks contactor opened, on Y axis 6 Gn for 11 ms IEC 60068-2-27 Shocks contactor opened, on X axis 10 Gn for 11 ms IEC 60068-2-27 Vibrations contactor opened 2 Gn, 5...300 Hz IEC 60068-2-6 Vibrations contactor closed 4 Gn, 5...300 Hz IEC 60068-2-6 Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27 Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27 Height 58 mm Width 45 mm Depth 57 mm Product weight 0.235 kg RoHS compliance RoHS EUR status Compliant RoHS EUR conformity date(YYWW) 0825 Contractual warranty Period 18 months 3