The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Jul 5, 2013
1
Product data sheet
Characteristics
LP4K0601BW3
TeSys K contactor - 3P(3 NO) - AC-3 - <= 440
V 6 A - 24 V DC coil
Main
Commercial Status Commercialised
Range of product TeSys K
Product or component
type
Contactor
Device short name LP4K
Contactor application Motor control
Utilisation category AC-3
AC-4
Poles description 3P
Power pole contact
composition
3 NO
[Ue] rated operational
voltage
<= 690 V AC 50/60 Hz for signalling circuit
690 V AC 50/60 Hz for power circuit
[Ie] rated operational
current
6 A at <= 440 V AC AC-3 for power circuit
Motor power kW 3 kW at 660...690 V AC 50/60 Hz
3 kW at 500...600 V AC 50/60 Hz
3 kW at 480 V AC 50/60 Hz
3 kW at 440 V AC 50/60 Hz
2.2 kW at 380...415 V AC 50/60 Hz
1.5 kW at 220...230 V AC 50/60 Hz
Control circuit type DC low consumption
Control circuit voltage 24 V DC
Auxiliary contact com-
position
1 NC
[Uimp] rated impulse
withstand voltage
8 kV
Overvoltage category III
[Ith] conventional free
air thermal current
10 A at <= 50 °C for signalling circuit
20 A at <= 50 °C for power circuit
Irms rated making ca-
pacity
110 A AC for signalling circuit conforming to IEC
60947
110 A AC for power circuit conforming to IEC 60947
110 A AC for power circuit conforming to NF C
63-110
Rated breaking capac-
ity
70 A at 660...690 V conforming to IEC 60947
110 A at 380...400 V conforming to IEC 60947
110 A at 220...230 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947
110 A at 440 V conforming to IEC 60947
110 A at 415 V conforming to IEC 60947
[Icw] rated short-time
withstand current
20 A <= 50 °C >= 15 s power circuit
110 A 100 ms signalling circuit
90 A 500 ms signalling circuit
80 A 1 s signalling circuit
40 A <= 50 °C 3 min power circuit
45 A <= 50 °C 1 min power circuit
60 A <= 50 °C 30 s power circuit
80 A <= 50 °C 10 s power circuit
85 A <= 50 °C 5 s power circuit
90 A <= 50 °C 1 s power circuit
Associated fuse rating 10 A gG for signalling circuit conforming to VDE
0660
10 A gG for signalling circuit conforming to IEC
60947
25 A aM for power circuit
25 A gG at <= 440 V for power circuit
Average impedance 3 mOhm at 50 Hz - Ith 20 A for power circuit
2
[Ui] rated insulation
voltage
600 V for signalling circuit conforming to CSA C22.2
No 14
600 V for power circuit conforming to CSA C22.2 No
14
600 V for signalling circuit conforming to UL 508
690 V for signalling circuit conforming to IEC
60947-5-1
690 V for signalling circuit conforming to IEC
60947-4-1
690 V for power circuit conforming to IEC 60947-4-1
600 V for power circuit conforming to UL 508
Electrical durability 1.3 Mcycles 6 A AC-3 at Ue <= 440 V
Mounting support Plate
Rail
Standards BS 5424
IEC 60947
NF C 63-110
VDE 0660
Product certifications CSA
UL
Connections - terminals Screw clamp terminals 2 cable(s) 0.34...1.5 mm² -
cable stiffness: flexible - with cable end
Screw clamp terminals 2 cable(s) 0.75...4 mm² - ca-
ble stiffness: flexible - without cable end
Screw clamp terminals 2 cable(s) 1.5...4 mm² - ca-
ble stiffness: solid
Screw clamp terminals 1 cable(s) 0.34...2.5 mm² -
cable stiffness: flexible - with cable end
Screw clamp terminals 1 cable(s) 0.75...4 mm² - ca-
ble stiffness: flexible - without cable end
Screw clamp terminals 1 cable(s) 1.5...4 mm² - ca-
ble stiffness: solid
Tightening torque 1.3 N.m - on screw clamp terminals - with screwdriv-
er flat Ø 6 mm
1.3 N.m - on screw clamp terminals - with screwdriv-
er Philips No 2
Operating time 30...40 ms coil energisation and NO closing
10...20 ms coil de-energisation and NO opening
Safety reliability level B10d = 20000000 cycles contactor with mechanical
load conforming to EN/ISO 13849-1
B10d = 1369863 cycles contactor with nominal load
conforming to EN/ISO 13849-1
Mechanical durability 30 Mcycles
Operating rate 3600 cyc/h
Complementary
Coil technology Built-in bidirectional peak limiting diode suppressor
Control circuit voltage limits 0.1...0.7 Uc at <= 50 °C drop-out
0.7...1.30 Uc at <= 50 °C operational
Inrush power in W 1.8 W at 20 °C
Hold-in power consumption in W 1.8 W at 20 °C
Heat dissipation 1.8 W
Auxiliary contacts type Type instantaneous (1 NC)
Minimum switching current 5 mA for signalling circuit
Minimum switching voltage 17 V for signalling circuit
Non overlap distance 0.5 mm
Insulation resistance > 10 MOhm for signalling circuit
Environment
IP degree of protection IP2x conforming to VDE 0106
Protective treatment TC conforming to DIN 50016
TC conforming to IEC 60068
Ambient air temperature for operation -25...50 °C
Ambient air temperature for storage -50...80 °C
Operating altitude 2000 m without derating in temperature
3
Flame retardance Requirement 2 conforming to NF F 16-102
Requirement 2 conforming to NF F 16-101
V1 conforming to UL 94
Mechanical robustness Shocks contactor closed, on Y axis 10 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on X axis 15 Gn for 11 ms IEC 60068-2-27
Shocks contactor opened, on Y axis 6 Gn for 11 ms IEC 60068-2-27
Shocks contactor opened, on X axis 10 Gn for 11 ms IEC 60068-2-27
Vibrations contactor opened 2 Gn, 5...300 Hz IEC 60068-2-6
Vibrations contactor closed 4 Gn, 5...300 Hz IEC 60068-2-6
Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27
Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27
Height 58 mm
Width 45 mm
Depth 57 mm
Product weight 0.235 kg
RoHS compliance
RoHS EUR status Compliant
RoHS EUR conformity date(YYWW) 0825
Contractual warranty
Period 18 months