2SB1409(L)/(S)
Silicon PNP Epitaxial
ADE-208-877 (Z)
1st. Edition
Sep. 2000
Application
Low frequency power amplifier complementary Pair with 2SD2123(L)/(S)
Outline
4
123
4
3
2
11. Base
2. Collector
3. Emitter
4. Collector
DPAK
S Type
L Type
2SB1409(L)/(S)
2
Absolute Maximum Ratings (Ta = 25°C)
Item Symbol Ratings Unit
Collector to base voltage VCBO –180 V
Collector to emitter voltage VCEO –160 V
Emitter to base voltage VEBO –5 V
Collector current IC–1.5 A
Collector peak current IC(peak) –3 A
Collector power dissipation PC*118 W
Junction temperature Tj 150 °C
Storage temperature Tstg –55 to +150 °C
Note: 1. Value at TC = 25°C.
Electrical Characteristics (Ta = 25°C)
Item Symbol Min Typ Max Unit Test conditions
Collector to base breakdown
voltage V(BR)CBO –180 V IC = –1 mA, IE = 0
Collector to emitter breakdown
voltage V(BR)CEO –160 V IC = –10 mA, RBE =
Emitter to base breakdown
voltage V(BR)EBO –5 V IE = –1 mA, IC = 0
Collector cutoff current ICBO –10 µAV
CB = –160 V, IE = 0
DC current transfer ratio hFE1*160 200 VCE = –5 V, IC = –150 mA*2
hFE2 30 VCE = –5 V, IC = –500 mA*2
Collector to emitter saturation
voltage VCE(sat) ——1V I
C
= –500 mA, IB = –50 mA
Base to emitter voltage VBE –1.5 V VCE = –5 V, IC = –150 mA
Gain bandwidth product fT 240 MHz VCE = –5 V, IC = –150 mA
Collector output capacitance Cob 25 pF VCB = –10 A, IE = 0, f = 1 MHz
Notes: 1. The 2SB1409(L)/(S) is grouped by hFE1 as follows.
BC
60 to 120 100 to 200
2. Pulse test.
2SB1409(L)/(S)
3
0Case Temperature TC (°C)
Collector power dissipation Pc (W)
Maximum Collector Dissipation Curve
50 100 150
10
30
20
–0.01
–0.03
–0.1
–0.3
–1.0
–10
–3
Collector to emitter Voltage VCE (V)
Collector Current IC (A)
–3 –10 –30 –100 –300
Area of Safe Operation
IC (max)
iC (peak)
PW = 10 ms
1 ms
DC Operation (T
C
= 25°C)
Ta = 25°C
1 Shot Pulse
Collector to emitter Voltage VCE (V)
Collector Current IC (A)
0
Typical Output Characteristics
–10 –20 –30 –40 –50
–0.2
–0.4
–0.6
–0.8
–1.0
IB = 0 TC = 25°C
PC = 18 W
–1 mA
–1.5
–2.5
–3.5
–4.5
–2
–3
–4
–5
10
30
100
300
1,000
Collector current IC (A)
DC current transfer ratio hFE
–0.01 –0.03 –0.1 –0.3 –1.0
DC Current Transfer Ratio vs.
Collector Current
VCE = –5 V
Ta = 25°C
2SB1409(L)/(S)
4
–0.01
–0.1
–1.0
–10
Collector current IC (A)
–0.001 –0.01 –0.1 –1.0
Collector to emitter saturation voltage
VCE (sat) (V)
Saturation Voltage vs. Collector Current
lC = 10 lB
Ta = 25°C–0.1
–0.3
–1.0
–3
–10
Collector current IC (A)
–0.03 –0.1 –0.3 –1.0 –3.0
Base to emitter saturation voltage
VBE (sat) (V)
Saturation Voltage vs. Collector Current
lC = 10 lB
Ta = 25°C
0
–0.4
–0.8
–1.2
–1.6
–2.0
Base to emitter voltage VBE (V)
Collector current IC (A)
0 –0.4 –0.8 –1.2 –1.6 –2.0
Typical Transfer Characteristics
VCE = –5 V
Ta = 25°C10
30
100
300
1,000
Collector current IC (A)
Gain bandwidth product fT (MHz)
–0.01 –0.03 –0.1 –0.3 –1.0
Gain Bandwidth Product vs.
Collector Current
VCE = –5 V
Ta = 25°C
2SB1409(L)/(S)
5
3
10
30
100
300
Collector to base voltage VCB (V)
Collector output capacitance Cob (pF)
–1 –3 –10 –30 –100
Collector Output Capacitance vs.
Collector to Base Voltage
f = 1 MHz
IE = 0
Ta = 25°C
2SB1409(L)/(S)
6
Package Dimensions
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
DPAK (L)-(1)
Conforms
0.42 g
Unit: mm
6.5 ± 0.5 2.3 ± 0.2
0.55 ± 0.1
1.2 ± 0.3
0.55 ± 0.1
5.5 ± 0.5 1.7 ± 0.5
16.2 ± 0.5
3.1 ± 0.5
5.4 ± 0.5
1.15 ± 0.1
2.29 ± 0.5 2.29 ± 0.5
0.8 ± 0.1
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
DPAK (S)-(1)
Conforms
0.28 g
Unit: mm
6.5 ± 0.5
5.4 ± 0.5 2.3 ± 0.2
0.55 ± 0.1
0 – 0.25
0.55 ± 0.1
1.7 ± 0.5
5.5 ± 0.5
2.5 ± 0.5
1.15 ± 0.1
0.8 ± 0.1
2.29 ± 0.5
2.29 ± 0.5
1.2 Max
(4.9)
(5.3)
2SB1409(L)/(S)
7
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-
safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00,
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
URL NorthAmerica : http://semiconductor.hitachi.com/
Europe : http://www.hitachi-eu.com/hel/ecg
Asia : http://sicapac.hitachi-asia.com
Japan : http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road,
Hung-Kuo Building,
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower,
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon,
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://www.hitachi.com.hk
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585160
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straβe 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
For further information write to:
Colophon 2.0