Infrared Light Emitting VCSEL OPR2800V Features: * * * * High speed VCSEL High output power Narrow beam angle Suitable for all types of high-speed data communications equipment * Also available as diode (OPR2800, OPR2800T) Description: The OPR2800V is a high performance 850 nm invisible VCSEL (Class 1M) with a flat lens window. Its high speed, high output power and concentric beam pattern make it an ideal transmitter for all types of high-speed data equipment applications. Please refer to Application Bulletins 221 and 224 for additional design information and reliability (degradation) data. Refer to Application Bulletin 237 Ordering Information Applications: * * * Fibre channel Gigabit Ethernet ATM * * * VSR (Very Short Reach) Intra-system links Optical backplane interconnects Part Number LED Peak Wavelength OPR2800V 850 nm OPR2800V Total Laser Beam Packaging Class Angle 24 Class 1M Chip Tray Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. 1 2 Pin # LED 1 Cathode 2 Anode OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 03/2012 Page 1 of 3 Infrared Light Emitting VCSEL OPR2800V Absolute Maximum Ratings (TA = 25 C unless otherwise noted) -40o C to +100o C Storage Temperature Range 0o C to +85o C Operating Temperature Range Maximum Forward Peak Current 20 mA Maximum Reverse Voltage 10 V Maximum Continuous Optical Power at 70 C 1.1 mW 250 C(1) Solder reflow time within 5C of peak temperature is 20 to 40 seconds Notes: 1. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics (TA = 25 C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS VF Forward Voltage 1.60 - 2.20 V IR Reverse Current - - 35 A tr, tf Output Rise Time, Output Fall Time - 100 - ps POT Total Power Out TEST CONDITIONS IF = 7 mA 20% to 80% 1.50 - - mW (1) 0.80 - 3 mA (2) 20 - 55 ohms 0.28 - - mW/mA Linearity 0.00 - - - P Wavelength at Peak Emission 840 850 860 nm - Optical Bandwidth - - 0.85 nm - Beam Divergence - 24 - Degree Relative Intensity Noise - -123 - db/Hz ITH RS - NRI ITH/T Threshold Current Series Resistance (3) Slope Efficiency (4) Temp Coefficient of Threshold Current - 1.0 - mA /T Temp Coefficient of Wavelength - 0.06 - %/C VF/T Temperature Coefficient for VF - -2.5 - - -0.5 - /T (3) Temperature Coefficient for Efficiency IF = 7 mA IF = 7 mA (1) 0 - 70 0 - 70, IF = 7 mA mW%/C 0 - 70, IF = 7 mA %/C 0 - 70 Notes: 1. Threshold current is based on the two line intersection method specified in Telcordia GR468-Core. Line 1 from 4 mA to 6mA. Line 2 from 0 mA to 0.5 mA. 2. Series resistance is the slope of the voltage-current line from 5 to 8 mA. 3. Slope efficiency is the slope of the best-fit LI line from 5 mA to 8 mA, using no larger than 0.25 mA test interval points. 4. Using data points taken for slope efficiency above, L/ I shall be calculated for each adjacent pair of points. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 03/2012 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Infrared Light Emitting VCSEL OPR2800V OP2800V - Normalized Output Power vs Forward Current OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 03/2012 Page 3 of 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TT Electronics: OPR2800V