BDX34C - ON Semiconductor - Datasheet.Live

November, 2014 − Rev. 14 1Publication Order Number:

BDX33B/D

BDX33B, BDX33C (NPN)

BDX34B, BDX34C (PNP)

Darlington Complementary

Silicon Power Transistors

These devices are designed for general purpose and low speed

switching applications.

Features

•High DC Current Gain − hFE = 2500 (typ.) at IC = 4.0

•Collector−Emitter Sustaining Voltage at 100 mAdc

VCEO(sus) = 80 Vdc (min) − BDX33B, BDX334B

= 100 Vdc (min) − BDX33C, BDX334C

•Low Collector−Emitter Saturation Voltage

VCE(sat) = 2.5 Vdc (max) at IC = 3.0 Adc

− BDX33B, 33C/34B, 34C

•Monolithic Construction with Build−In Base−Emitter Shunt Resistors

•These Devices are Pb−Free and are RoHS Compliant*

MAXIMUM RATINGS

Rating Symbol Value Unit

Collector−Emitter Voltage

BDX33B, BDX34B

BDX33C, BDX34C

VCEO 80

100

Vdc

Collector−Base Voltage

BDX33B, BDX34B

BDX33C, BDX34C

VCB 80

100

Vdc

Emitter−Base Voltage VEB 5.0 Vdc

Collector Current

Continuous

Peak

IC10

15 Adc

Base Current IB0.25 Adc

Total Device Dissipation @ TC = 25°C

Derate above 25°CPD70

0.56 W

W/°C

Operating and Storage Junction

Temperature Range TJ, Tstg −65 to +150 °C

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be af fected.

THERMAL CHARACTERISTICS

Characteristics Symbol Max Unit

Thermal Resistance, Junction−to−Case RqJC 1.78 °C/W

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

DARLINGTON

10 AMPERE

COMPLEMENTARY SILICON

POWER TRANSISTORS

80−100 VOLTS, 65 WATTS

TO−220

CASE 221A

STYLE 1

www.onsemi.com

MARKING DIAGRAM

BDX3xy = Device Code

x = 3 or 4

y = B or C

A = Assembly Location

Y = Year

WW = Work Week

G = Pb−Free Package

BDX3xyG

AY WW

See detailed ordering and shipping information in the package

dimensions section on page 5 of this data sheet.

ORDERING INFORMATION

BDX33B, BDX33C (NPN) BDX34B, BDX34C (PNP)

www.onsemi.com

00 20 40 60 80 100 120 140 160

Figure 1. Power Derating

TC, CASE TEMPERATURE (°C)

PD, POWER DISSIPATION (WATTS)

ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)

Characteristic Symbol Min Max Unit

OFF CHARACTERISTICS

Collector−Emitter Sustaining Voltage (Note 1)

(IC = 100 mAdc, IB = 0) BDX33B/BDX34B

BDX33C/BDX34C

VCEO(sus) 80

100 −

−

Vdc

Collector−Emitter Sustaining Voltage (Note 1)

(IC = 100 mAdc, IB = 0, RBE = 100) BDX33B/BDX34B

BDX33C/BDX33C

VCER(sus) 80

100 −

−

Vdc

Collector−Emitter Sustaining Voltage (Note 1)

(IC = 100 mAdc, IB = 0, VBE = 1.5 Vdc) BDX33B/BDX34B

BDX33C/BDX34C

VCEX(sus) 80

100 −

−

Vdc

Collector Cutoff Current

(VCE = 1/2 rated VCEO, IB = 0) TC = 25°C

TC = 100°C

ICEO −

−0.5

mAdc

Collector Cutoff Current

(VCB = rated VCBO, IE = 0) TC = 25°C

TC = 100°C

ICBO −

−1.0

5.0

mAdc

Emitter Cutoff Current

(VBE = 5.0 Vdc, IC = 0) IEBO − 10 mAdc

ON CHARACTERISTICS

DC Current Gain (Note 1)

(IC = 3.0 Adc, VCE = 3.0 Vdc) BDX33B, 33C/34B, 34C hFE 750 − −

Collector−Emitter Saturation Voltage

(IC = 3.0 Adc, IB = 6.0 mAdc) BDX33B, 33C/34B, 34C VCE(sat) − 2.5 Vdc

Base−Emitter On Voltage

(IC = 3.0 Adc, VCE = 3.0 Vdc) BDX33B, 33C/34B, 34C VBE(on) − 2.5 Vdc

Diode Forward Voltage

(IC = 8.0 Adc) VF− 4.0 Vdc

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

1. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2.0%.

2. Pulse Test non repetitive: Pulse Width = 0.25 seconds.

BDX33B, BDX33C (NPN) BDX34B, BDX34C (PNP)

www.onsemi.com

Figure 1. Thermal Response

t, TIME OR PULSE WIDTH (ms)

1.0

0.01

0.7

0.5

0.3

0.2

0.1

0.07

0.05

0.03

0.02

r(t) EFFECTIVE TRANSIENT

THERMAL RESISTANCE (NORMALIZED)

0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 1000500

RqJC(t) = r(t) RqJC

RqJC = 1.92°C/W

D CURVES APPLY FOR POWER

PULSE TRAIN SHOWN

READ TIME AT t1

TJ(pk) - TC = P(pk) RqJC(t)

P(pk)

DUTY CYCLE, D = t1/t2

D = 0.5

SINGLE PULSE

0.2

0.05

0.1

0.02

0.01

SINGLE

PULSE

0.03 0.3 3.0 30 300

1.0

5.0

2.0

1.0

0.5

0.02 3.0 5.0 7.0 10 20 30 50 10

0.2

5.0 ms

1.0 ms

BDX33B

BDX33C

500 ms

100

TC = 25°C

CURVES APPLY BELOW RATED VCEO

0.05

0.1

2.0

1.0

Figure 2. Active−Region Safe Operating Area

VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)

5.0

2.0

1.0

0.5

0.02 3.0 5.0 7.0 10 20 30 50 10070

0.2

IC, COLLECTOR CURRENT (AMP)

5.0 ms

1.0 ms

BDX34B

BDX34C

500 ms

100

TC = 25°C

BONDING WIRE LIMITED

THERMALLY LIMITED @ TC = 25°C

(SINGLE PULSE)

SECOND BREAKDOWN LIMITED

CURVES APPLY BELOW RATED VCEO

0.05

0.1

2.0

VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)

IC, COLLECTOR CURRENT (AMP)

BONDING WIRE LIMITED

THERMALLY LIMITED @ TC = 25°C

(SINGLE PULSE)

SECOND BREAKDOWN LIMITED

There are two limitations o n the power h andling ability o f a

transistor: average junction temperature and second

breakdown. S afe o perating a rea c urves i ndicate I C − V CE l imits

of the transistor that must be observed for reliable operation,

i.e., the transistor must not be subjected to greater dissipation

than t he curves i ndicate. T he d ata o f F igure 3 i s b ased o n TJ(pk)

= 150°C; TC is variable depending on conditions. Second

breakdown pulse limits are valid for duty cycles to 10%

provided TJ(pk) = 150°C. TJ(pk) may be calculated from the

data in Figure 4. At high case temperatures, thermal

limitations will r e duce t he p ower t hat c an b e h andled t o v alues

less than the limitations imposed by second breakdown.

10,000

1.0

Figure 3. Small−Signal Current Gain

f, FREQUENCY (kHz)

10 2.0 5.0 10 20 50 100 200 1000

500

300

100

5000

hFE, SMALL-SIGNAL CURRENT GAIN

3000

200

500

2000

1000

300

0.1

Figure 4. Capacitance

VR, REVERSE VOLTAGE (VOLTS)

30 1.0 2.0 5.0 20 10010

C, CAPACITANCE (pF)

200

100

TJ = 25°C

Cib

Cob

500.2 0.5

TJ = 25°C

VCE = 4.0 Vdc

IC = 3.0 Adc

PNP

NPN

PNP

NPN

BDX33B, BDX33C (NPN) BDX34B, BDX34C (PNP)

www.onsemi.com

0.1

Figure 5. DC Current Gain

IC, COLLECTOR CURRENT (AMP)

0.2 0.3 0.5 0.7 1.0 2.0 10

500

300

hFE, DC CURRENT GAIN

TJ = 150°C

25°C

-55°C

VCE = 4.0 V

200 7.0

NPN

BDX33B, 33C

PNP

BDX34B, 34C

20,000

5000

10,000

3000

2000

1000

3.0 5.0 0.1

IC, COLLECTOR CURRENT (AMP)

0.2 0.3 0.5 0.7 1.0 2.0 10

500

300

hFE, DC CURRENT GAIN

TJ = 150°C

25°C

-55°C

200 7.0

20,000

5000

10,000

3000

2000

1000

3.0 5.0

VCE = 4.0 V

VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)

Figure 6. Collector Saturation Region

3.0

IB, BASE CURRENT (mA)

0.3 0.5 1.0 2.0 3.0 5.0 7.0 30

2.6

2.2

1.8

1.4

IC = 2.0 A

TJ = 25°C

4.0 A 6.0 A

1.0 0.7 2010

3.0

IB, BASE CURRENT (mA)

0.3 0.5 1.0 2.0 3.0 5.0 7.0 30

2.6

2.2

1.8

1.4

IC = 2.0 A

TJ = 25°C

4.0 A 6.0 A

1.0 0.7 2010

IC, COLLECTOR CURRENT (AMP)

VBE(sat) @ IC/IB = 250

V, VOLTAGE (VOLTS)

Figure 7. “On” Voltages

IC, COLLECTOR CURRENT (AMP)

V, VOLTAGE (VOLTS)

VBE(sat) @ IC/IB = 250

VCE(sat) @ IC/IB = 250

TJ = 25°C

VBE @ VCE = 4.0 V

VCE(sat) @ IC/IB = 250

TJ = 25°C

0.1 0.2 0.3 0.5 0.7 1.0 2.0 107.03.0 5.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 107.03.0 5.0

3.0

2.5

2.0

1.5

1.0

0.5

3.0

2.5

2.0

1.5

1.0

0.5

BDX33B, BDX33C (NPN) BDX34B, BDX34C (PNP)

www.onsemi.com

ORDERING INFORMATION

Device Package Shipping†

BDX33BG TO−220

(Pb−Free) 50 Units / Rail

BDX33CG TO−220

(Pb−Free) 50 Units / Rail

BDX34BG TO−220

(Pb−Free) 50 Units / Rail

BDX34CG TO−220

(Pb−Free) 50 Units / Rail

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

BDX33B, BDX33C (NPN) BDX34B, BDX34C (PNP)

www.onsemi.com

PACKAGE DIMENSIONS

TO−220

CASE 221A−09

ISSUE AH

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. DIMENSION Z DEFINES A ZONE WHERE ALL

BODY AND LEAD IRREGULARITIES ARE

ALLOWED.

DIM MIN MAX MIN MAX

MILLIMETERSINCHES

A0.570 0.620 14.48 15.75

B0.380 0.415 9.66 10.53

C0.160 0.190 4.07 4.83

D0.025 0.038 0.64 0.96

F0.142 0.161 3.61 4.09

G0.095 0.105 2.42 2.66

H0.110 0.161 2.80 4.10

J0.014 0.024 0.36 0.61

K0.500 0.562 12.70 14.27

L0.045 0.060 1.15 1.52

N0.190 0.210 4.83 5.33

Q0.100 0.120 2.54 3.04

R0.080 0.110 2.04 2.79

S0.045 0.055 1.15 1.39

T0.235 0.255 5.97 6.47

U0.000 0.050 0.00 1.27

V0.045 --- 1.15 ---

Z--- 0.080 --- 2.04

123

SEATING

PLANE

−T−

STYLE 1:

PIN 1. BASE

2. COLLECTOR

3. EMITTER

4. COLLECTOR

UBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

BDX33B/D

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

P.O. Box 5163, Denver, Colorado 80217 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loc

Sales Representative

ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.

SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed

at www.onsemi.com/site/pdf/Patent− Marking. pdf. SCILLC reserves the right to make changes without f urther n otice to any product s herein. S CILLC makes n o warranty, representation

or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and

specifically disclaims any and all l iabilit y, including without limitation special, consequential or i ncident al d amages. “Typical” parameters which may be provided in S CI LLC d ata sheets

and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each

customer application b y c ust omer’s technical e xperts. SCILLC does not c onvey a ny license under its p at ent r ights n or the rights of o t hers. S CILLC p roducts a re n ot d esigned, i ntended,

or authorized for use as c omponent s i n s yst ems i nt ended f or s urgic al i m plant i nt o the body, or other applicat ions i nt ended t o s upport o r sustain life, or for any other application i n w hich

the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or

unauthorized application, Buyer shall indemnify and hold SCILLC an d it s officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and r easonable a ttorney f ees a rising o ut of, directly o r i ndirect ly, a ny c laim o f p ersonal i njury o r d eath associated with s uch u nintended o r u nauthorized u se, even if s uch claim

alleges that SCILLC was negligent regarding the d esign or manufacture of the p art. SCILLC is a n E qual O pport unity/Af firmative A ction E mployer . T his literature is s ubject t o all applicable