ScotchlokTM Terminals MVU14-110DF W Female Disconnect, Vinyl Insulated, Butted Seam L Data Sheet Product Number Wire Range (AWG) MVU14-110DF 16-14 Mates with Male Tab Width (W ) x Thickness 0.110 x 0.020 0.125 x 0.020 Specifications Wire Size: Barrel Seam: Maximum Operating Temp: Maximum Current: Insulator Material: Terminal Material: Plating: L Barrel Length Barrel I.D. Maximum Insulation Diameter 0.81 0.19 0.115 0.145 Installation Information See Table Above Butted 221F (105C) Same as Wire Vinyl Brass Tin WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. For use on stranded copper wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool: TH-440, TH-450 (scissor style) or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical) Engineering Specification Crimp-Type Female Disconnect Terminals shall, electrically and mechanically, connect permanently to a prestripped end of a stranded copper wire: and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The Vinyl Insulated 0.110 Female Disconnect shall be tin plated 0.010 thick brass with a tongue for gripping a 0.110 or 0.125 male tab of 0.020 thickness and with a 0.19 long barrel covered by a molded vinyl sleeve, color coded and sized for a specified (AWG) wire range (16-14). The connector line shall offer tongue variations (sized to grip Male Tabs: 0.110 x 0.020 or 0.110 x 0.032 per ANSI/NEMA CD-2) and barrel variations construction (non-insulated, vinyl insulated with insulation grip, nylon fully insulated, etc.). The tongue portion shall be marked with the wire range and manufacturer's name or trade mark (). 3M and Scotchlok are trademarks of 3M IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 http://www.3M.com/elpd Litho in USA. (c) 3M 2002 78-8126-0379-9-A