Poly-Pad K-10 (R) Polyester-Based,Thermally Conductive Insulation Material Features and Benefits * Thermal impedance: 0.60C-in2/W (@50 psi) * Polyester based * For applications requiring non-silicone conformal coatings * Designed for silicone-sensitive applications * Excellent dielectric strength and thermal performance TYPICAL PROPERTIES OF POLY-PAD K-10 PROPERTY IMPERIAL VALUE Color Yellow Reinforcement Carrier Polyimide Thickness (inch) / (mm) 0.006 Hardness (Shore A) 90 Breaking Strength (lbs/inch) / (kN/m) 30 Elongation (%) 40 Tensile Strength (psi) / (MPa) 5000 Continuous Use Temp (F) / (C) -4 to 302 ELECTRICAL Dielectric Breakdown Voltage (Vac) 6000 Dielectric Constant (1000 Hz) 3.7 Volume Resistivity (Ohm-meter) 1012 Flame Rating V-O THERMAL Thermal Conductivity (W/m-K) 1.3 THERMAL PERFORMANCE vs PRESSURE Pressure (psi) 10 TO-220 Thermal Performance (C/W) 3.76 Thermal Impedance (C-in2/W) (1) 1.04 METRIC VALUE Yellow Polyimide 0.152 90 5 40 34 -20 to 150 TEST METHOD Visual -- ASTM D374 ASTM D2240 ASTM D1458 ASTM D412 ASTM D412 -- 6000 3.7 1012 V-O ASTM D149 ASTM D150 ASTM D257 U.L.94 1.3 ASTM D5470 25 3.35 0.80 50 2.75 0.60 100 2.30 0.43 200 2.03 0.30 1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied. * Power supplies * Motor controls * Power semiconductors Configurations Available: * Sheet form, die-cut parts and roll form * With or without pressure sensitive adhesive Building a Part Number - AC - 11.512 - Standard Options NA Section E 0.006 Section D - Section C PPK10 Section B Polyester-based, thermally conductive insulators from Bergquist provide a complete family of materials for silicone-sensitive applications. Poly-Pads are ideally suited for applications requiring conformal coatings or applications where silicone contamination is a concern (telecomm and certain aerospace applications). Poly-Pads are constructed with ceramic-filled polyester resins coating either side of a fiberglass carrier or a film carrier.The Poly-Pad family offers a complete range of performance characteristics to match individual applications. Typical Applications Include: Section A Poly-Pad K-10 is a composite of film coated with a polyester resin.The material offers superior thermal performance for your most critical applications with a thermal resistance of 0.2C-in2/W as well as excellent dielectric strength. NA = Selected standard option. If not selecting a standard option, insert company name, drawing number, and revision level. _ _ _ = Standard configuration dash number, 11.512 = 11.5" x 12" sheets, 11.5/250 = 11.5" x 250' rolls, or 00 = custom configuration AC = Adhesive, one side 00 = No adhesive Standard thicknesses available: 0.006" PPK10 = Poly-Pad K-10 Material Note: To build a part number, visit our website at www.bergquistcompany.com. Sil-Pad (R): U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others www.bergquistcompany.com The Bergquist Company North American Headquarters 18930 West 78th Street Chanhassen, MN 55317 Phone: 800-347-4572 Fax: 952-835-0430 The Bergquist Company European Headquarters Netherlands Phone: 31-35-5380684 Fax: 31-35-5380295 The Bergquist Company Asia Headquarters Hong Kong Phone: 852-2690-9296 Fax: 852-2690-3408 All statements, technical information and recommendations herein are based on tests we believe to be reliable, and THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers' and manufacturers' only obligation shall be to replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT, INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer. PDS_PP K10_1113 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bergquist Company: PPK10-0.006-00-11512