Easy to setup with industrial reliability
TekSmartLab can be easily setup via WI-FI without laying LAN cables.
Without any configuration, instruments are recognized automatically by the
system when they are connected to the system.
For the labs which have already equipped with Tektronix and Keithley
instruments, instructors can smoothly update their labs to TekSmartLab as
most of the Tektronix and Keithley teaching lab instruments are supported,
even some instruments that have been phased out in the last five years
(see Specifications).
Instead of controlling all the instruments by lab server directly, the
TBX3000A on each bench controls the instruments connected to it. Using
the TekSmartLab is an efficient and stable way to work. The TBX3000A,
which is based on the Tektronix oscilloscope platform, works seamlessly
with Tektronix and Keithley instruments, assuring the industrial reliability of
the entire system.
Centralized configuration
Instructors can load instrument configurations based on different courses
and then distribute them to over 100 instruments with a single click before a
lab exercise. Instrument configuration changes can be made and delivered
anytime; for example, the Autoset function can be disabled to encourage
students to learn how to manually adjust an oscilloscope to display the
correct waveform.
When the TBS1000B-EDU series oscilloscopes are connected to the
system, the courseware contents, as well as instruments’ firmware, can be
updated remotely, while instructors have had to update them one by one
manually via USB thumb drives before.
Centralized monitoring and remote
assistance
With TekSmartLab, professors can easily monitor the status of all
instruments during the experiment: Green signifies that the instrument is
working, gray signifies no connection, and red signifies error. A instructor
can check or help a specific bench by clicking on the corresponding bench
icon.
Datasheet
2 www.tektronix.com