S17040G - Faraday Technology

FARA165d Page 1 of 2 Dec-99(B)

STEEPNESS FACTOR 1.72

This range of 5-pole Elliptical Function Low Pass Filters is intended for bandwidth limitation with minimal

distortion of the transmitted signal. The modest rate of cut off minimises time domain ringing The filters are

corrected for Group Delay distortion over 92% of the passband and for loss distortion over the entire

passband. Degradation of a composite video signal is small when a 4.5 MHz or 5.5 MHz filter is selected for a

525 or 625 line T.V. system.

Order Code End of Passband Start of Stopband Group Delay Ripple Delay Time

MHz MHz ns ns

S17020G 2.00 3.44 65 500

S17025G 2.50 4.30 55 400

S17030G 3.00 5.16 45 333

S17035G 3.50 6.02 40 286

S17040G 4.00 6.88 35 250

S17045G 4.50 7.74 30 222

S17050G 5.00 8.60 25 200

S17055G 5.50 9.46 25 182

S17060G 6.00 10.32 25 167

S17065G 6.50 11.18 20 154

S17070G 7.00 12.04 20 143

S17075G 7.50 12.90 20 133

S17080G 8.00 13.76 15 125

S17085G 8.50 14.62 15 118

S17090G 9.00 15.48 15 111

S17095G 9.50 16.34 15 105

S17100G 10.00 17.20 15 100

Other data Impedance 75 ohms

Stopband attenuation wrt 100 kHz > 40 dB

Insertion Loss at 100 kHz < 1.3 dB

Amplitude ripple in passband < 0.3 dB

Video performance for filters of 5.0 MHz (4.5 MHz for 525 line) and above.

Pulse and bar: K - rating < 1.0%

Luminance/Chrominance Gain inequality (20T) < 3%

Luminance/Chrominance Delay inequality (20T < 10 ns

Aqueous Washable Yes

Package DR00014A

S17 SERIES

GENERAL PURPOSE LP FILTER