VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 1Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Phase Control Thyristors
(Hockey PUK Version), 1745 A
FEATURES
Center amplifying gate
Metal case with ceramic insulator
International standard case K-PUK (A-24)
High profile hockey PUK
Designed and qualified for industrial level
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
DC motor controls
Controlled DC power supplies
AC controllers
ELECTRICAL SPECIFICATIONS
PRIMARY CHARACTERISTICS
IT(AV) 1745 A
VDRM/VRRM 800 V, 1200 V, 1400 V, 1600 V
VTM 1.62 V
IGT 100 mA
TJ-40 °C to +125 °C
Package K-PUK (A-24)
Circuit configuration Single SCR
K-PUK (A-24)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IT(AV)
1745 A
Ths 55 °C
IT(RMS)
3200 A
Ths 25 °C
ITSM
50 Hz 33 500 A
60 Hz 35 100
I2t50 Hz 5615 kA2s
60 Hz 5126
VDRM/VRRM 800 to 1600 V
tqTypical 200 μs
TJ-40 to +125 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VDRM/VRRM, MAXIMUM REPETITIVE
PEAK AND OFF-STATE VOLTAGE
V
VRSM, MAXIMUM
NON-REPETITIVE PEAK VOLTAGE
V
IDRM/IRRM MAXIMUM
AT TJ = TJ MAXIMUM
mA
VS-ST1230C..K
08 800 900
100
12 1200 1300
14 1400 1500
16 1600 1700
VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 2Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average on-state current
at heatsink temperature IT(AV) 180° conduction, half sine wave
double side (single side) cooled
1745 (700) A
55 (85) °C
Maximum RMS on-state current IT(RMS) DC at 25 °C heatsink temperature double side cooled 3200
A
Maximum peak, one-cycle
non-repetitive surge current ITSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
33 500
t = 8.3 ms 35 100
t = 10 ms 100 % VRRM
reapplied
28 200
t = 8.3 ms 29 500
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
5615
kA2s
t = 8.3 ms 5126
t = 10 ms 100 % VRRM
reapplied
3971
t = 8.3 ms 3625
Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 56 150 kA2s
Low level value of threshold voltage VT(TO)1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.93 V
High level value of threshold voltage VT(TO)2 (I > x IT(AV)), TJ = TJ maximum 1.02
Low level value of on-state slope resistance rt1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.17 m
High level value of on-state slope resistance rt2 (I > x IT(AV)), TJ = TJ maximum 0.16
Maximum on-state voltage VTM Ipk = 4000 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.62 V
Maximum holding current IHTJ = 25 °C, anode supply 12 V resistive load 600 mA
Typical latching current IL1000
SWITCHING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum non-repetitive rate of
rise of turned-on current dI/dt Gate drive 20 V, 20 , tr 1 μs
TJ = TJ maximum, anode voltage 80 % VDRM 1000 A/μs
Typical delay time tdGate current 1 A, dIg/dt = 1 A/μs
Vd = 0.67 % VDRM, TJ = 25 °C 1.9
μs
Typical turn-off time tqITM = 550 A, TJ = TJ maximum, dI/dt = 40 A/μs,
VR = 50 V, dV/dt = 20 V/μs, gate 0 V 100 , tp = 500 μs 200
BLOCKING
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum critical rate of rise of
off-state voltage dV/dt TJ = TJ maximum linear to 80 % rated VDRM 500 V/μs
Maximum peak reverse and
off-state leakage current
IRRM,
IDRM TJ = TJ maximum, rated VDRM/VRRM applied 100 mA
VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 3Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
TRIGGERING
PARAMETER SYMBOL TEST CONDITIONS
VALUES UNITS
typ. Max.
Maximum peak gate power PGM TJ = TJ maximum, tp 5 ms 16 W
Maximum average gate power PG(AV) TJ = TJ maximum, f = 50 Hz, d% = 50 3
Maximum peak positive gate current IGM
TJ = TJ maximum, tp 5 ms
3.0 A
Maximum peak positive gate voltage + VGM 20 V
Maximum peak negative gate voltage - VGM 5.0
DC gate current required to trigger IGT
TJ = -40 °C
Maximum required gate trigger/
current/voltage are the lowest
value which will trigger all units
12 V anode to cathode applied
200 -
mATJ = 25 °C 100 200
TJ = 125 °C 50 -
DC gate voltage required to trigger VGT
TJ = -40 °C 1.4 -
VTJ = 25 °C 1.1 3.0
TJ = 125 °C 0.9 -
DC gate current not to trigger IGD
TJ = TJ maximum
Maximum gate current/
voltage not to trigger is the
maximum value which will not
trigger any unit with rated VDRM
anode to cathode applied
10 mA
DC gate voltage not to trigger VGD 0.25 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum operating junction
temperature range TJ-40 to 125 °C
Maximum storage temperature range TStg -40 to 150
Maximum thermal resistance,
junction to heatsink RthJ-hs
DC operation single side cooled 0.042
K/W
DC operation double side cooled 0.021
Maximum thermal resistance,
case to heatsink RthC-hs
DC operation single side cooled 0.006
DC operation double side cooled 0.003
Mounting force, ± 10 % 24 500
(2500)
N
(kg)
Approximate weight 425 g
Case style See dimensions - link at the end of datasheet K-PUK (A-24)
RthJC CONDUCTION
CONDUCTION ANGLE
SINUSOIDAL
CONDUCTION
RECTANGULAR
CONDUCTION TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.003 0.003 0.002 0.002
TJ = TJ maximum K/W
120° 0.004 0.004 0.004 0.004
90° 0.005 0.005 0.005 0.005
60° 0.007 0.007 0.007 0.007
30° 0.012 0.012 0.012 0.012
VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 4Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
Fig. 3 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
Fig. 5 - On-State Power Loss Characteristics
Fig. 6 - On-State Power Loss Characteristics
Average On-state Current (A)
Maximum Allowable Heatsink Temperature
(°C)
40
50
60
70
80
90
100
110
120
130
0 200 400 600 800 1000 1200 1400
30˚
60˚
90˚
120˚
180˚
Conduction Angle
ST1230C..K Series
(Single Side Cooled)
R (DC) = 0.042 K/W
thJ-hs
Maximum Allowable Heatsink Temperature
(°C)
Average On-state Current (A)
20
30
40
50
60
70
80
90
100
110
120
130
0 400 800 1200 1600 2000
DC
30˚ 60˚
90˚
120˚ 180˚
Conduction Period
ST1230C..K Series
(Single Side Cooled)
R (DC) = 0.042 K/W
thJ-hs
Average On-state Current (A)
Maximum Allowable Heatsink Temperature
(°C)
30
40
50
60
70
80
90
100
110
120
130
0 500 1000 1500 2000 2500
30˚
60˚ 90˚
120˚
180˚
Conduction Angle
ST1230C..K Series
(Double Side Cooled)
R (DC) = 0.021 K/W
thJ-hs
Average On-state Current (A)
Maximum Allowable Heatsink Temperature
(°C)
20
30
40
50
60
70
80
90
100
110
120
130
0 500 1000 1500 2000 2500 3000 3500
DC
30˚
60˚
90˚
120˚
180˚
Conduction Period
ST1230C..K Series
(Double Side Cooled)
R (DC) = 0.021 K/W
thJ-hs
Average On-state Current (A)
Maximum Average On-state Power Loss (W)
0
500
1000
1500
2000
2500
3000
3500
4000
0 400 800 1200 1600 2000 2400
180˚
120˚
90˚
60˚
30˚
RMS Limit
Conduction Angle
ST1230C..K Series
T = 125˚C
J
Average On-state Current (A)
Maximum Average On-state Power Loss (W)
0
1000
2000
3000
4000
5000
0 500 1000 1500 2000 2500 3000 3500
DC
180˚
120˚
90˚
60˚
30˚
RMS Limit
Conduction Period
ST1230C..K Series
T = 125˚C
J
VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 5Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 9 - On-State Voltage Drop Characteristics
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine Wave On-state Current (A)
14000
16000
18000
20000
22000
24000
26000
28000
30000
110100
ST1230C..K Series
Initial T = 125˚C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
At Any Rated Load Condition And With
Rated V Applied Following Surge.
RRM
Pulse Train Duration (s)
Peak Half Sine Wave On-state Current (A)
12000
14000
16000
18000
20000
22000
24000
26000
28000
30000
32000
34000
0.01 0.1 1
Maximum Non Repetitive Surge Current
Versus Pulse Train Duration. Control
Of Conduction May Not Be Maintained.
ST1230C..K Series
Initial T = 125˚C
No Voltage Reapplied
Rated V Reapplied
RRM
J
Instantaneous On-state Voltage (V)
Instantaneous On-state Current (A)
100
1000
10000
0.5 1 1.5 2 2.5 3
T = 25˚C
J
ST1230C..K Series
T = 125˚C
J
Square Wave Pulse Duration (s)
Transient Thermal Impedance Z (K/W)
thJ-hs
0.001
0.01
0.1
0.001 0.01 0.1 1 10 100
ST1230C..K Series
Steady State Value
R = 0.042 K/W
(Single Side Cooled)
R = 0.021 K/W
(Double Side Cooled)
(DC Operation)
thJ-hs
thJ-hs
VS-ST1230C..K Series
www.vishay.com Vishay Semiconductors
Revision: 27-Sep-17 6Document Number: 94395
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 11 - Gate Characteristics
ORDERING INFORMATION TABLE
Instantaneous Gate Current (A)
Instantaneous Gate Voltage (V)
0.1
1
10
100
0.001 0.01 0.1 1 10 100
VGD
IGD
(b)
(a)
Tj=25 ˚C
Tj=125 ˚C
Tj=-40 ˚C
(1)
(2) (3)
(1) PGM = 16W, tp = 4ms
(2) PGM = 30W, tp = 2ms
(3) PGM = 60W, tp = 1ms
a) Recommended load line for
b) Recommended load line for
<=30% rated di/dt : 10V, 10ohms
Frequency Limited by PG(AV)
rated di/dt : 20V, 10ohms; tr<=1 µs
tr<=1 µs
Device: ST1230C..K Series
Rectangular gate pulse
- Thyristor
2
-Essential part number
3
- 0 = converter grade
4
- C = ceramic PUK
9
8
- Critical dV/dt:
5
- Voltage code x 100 = VRRM (see Voltage Ratings table)
6
- K = PUK case K-PUK (A-24)
7
- 0 = eyelet terminals (gate and auxiliary cathode unsoldered leads)
1 = fast-on terminals (gate and auxiliary cathode unsoldered leads)
2 = eyelet terminals (gate and auxiliary cathode soldered leads)
3 = fast-on terminals (gate and auxiliary cathode soldered leads)
None = 500 V/μs (standard selection)
L = 1000 V/μs (special selection)
Device code
51 32 4 6 7 8 9
STVS-1230 C 16 K 1 -
1-Vishay Semiconductors product
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95081
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 12-Jul-17 1Document Number: 95081
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
K-PUK (A-24)
DIMENSIONS in millimeters (inches)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
ST1230C08K1 ST1230C12K0L ST1230C12K0P ST1230C12K1 ST1230C12K1P ST1230C14K0L
ST1230C14K0LP ST1230C14K0P ST1230C14K1 ST1230C14K1P ST1230C16K0L VS-ST1230C16K0LP
ST1230C16K0P ST1230C16K1 ST1230C16K1P ST1230C08K0 ST1230C12K0 ST1230C14K0 ST1230C16K0 VS-
ST1230C08K0 VS-ST1230C16K0 VS-ST1230C14K0 VS-ST1230C12K0