
12-1
Semiconductor
Features
• Direct RESET
• TTL and CMOS Compatible Address and Enable
Inputs
• Maximum Power Supply Rating . . . . . . . . . . . . . . . .44V
• Break-Before-Make Switching
• Alternate Source
Applications
• Data Acquisition Systems
• Communication Systems
• Automatic Test Equipment
• Microprocessor Controlled Systemd
Description
The DG526, DG527, DG528, and DG529 are CMOS
Monolithic 16-Channel/Dual 4-Channel Analog Multiplexers.
Each device has on-chip address and control latches to sim-
plify design in microprocessor based applications. The DG526
uses 4 address lines to control its 16 channels; the DG527,
DG528 both use 3 address lines to control their 8 channels;
and the DG529 uses 2 address lines to control its 4 channels.
The enable pin is used to enable the address latches during
the WR pulse. It can be hard wired to the logic supply if one of
the channels will always be used (except during a reset) or it
can be tied to address decoding circuitry for memory mapped
operation. The RS pin is used to clear all latches regardless of
the state of any other latch or control line. The WR pin is used
to transfer the state of the address control lines to their
latches, except during a reset or when EN is lo w.
A channel in the ON state conducts signals equally well in
both directions. In the OFF state each channel blocks volt-
ages up to the supply rails. The address inputs, WR, RS and
the enable input are TTL and CMOS compatible over the full
specified operation temperature range.
Part Number Information
PART
NUMBER TEMP.
RANGE (oC) PACKAGE PKG. NO.
DG526AK -55 to 125 28 Ld CERDIP F28.6
DG526AK/883B -55 to 125 28 Ld CERDIP F28.6
DG526BK -25 to 85 28 Ld CERDIP F28.6
DG526BY -25 to 85 28 Ld SOIC M28.3
DG526CJ 0 to 70 28 Ld PDIP E28.6
DG526CK 0 to 70 28 Ld CERDIP F28.6
DG526CY 0 to 70 28 Ld SOIC M28.3
DG527AK -55 to 125 28 Ld CERDIP F28.6
DG527AK/883B -55 to 125 28 Ld CERDIP F28.6
DG527BK -25 to 85 28 Ld CERDIP F28.6
DG527BY -25 to 85 28 Ld SOIC M28.3
DG527CJ 0 to 70 28 Ld PDIP E28.6
DG527CK 0 to 70 28 Ld CERDIP F28.6
DG527CY 0 to 70 28 Ld SOIC M28.3
DG528AK -55 to 125 18 Ld CERDIP F18.3
DG528AK/883B -55 to 125 18 Ld CERDIP F18.3
DG528BK -25 to 85 18 Ld CERDIP F18.3
DG528BY -25 to 85 18 Ld SOIC M18.3
DG528CJ 0 to 70 18 Ld PDIP E18.3
DG528CK 0 to 70 18 Ld CERDIP F18.3
DG528CY 0 to 70 18 Ld SOIC M18.3
DG529AK -55 to 125 18 Ld CERDIP F18.3
DG529AK/883B -55 to 125 18 Ld CERDIP F18.3
DG529BK -25 to 85 18 Ld CERDIP F18.3
DG529BY -25 to 85 18 Ld SOIC M18.3
DG529CJ 0 to 70 18 Ld PDIP E18.3
DG529CK 0 to 70 18 Ld CERDIP F18.3
DG529CY 0 to 70 18 Ld SOIC M18.3
PART
NUMBER TEMP.
RANGE (oC) PACKAGE PKG. NO.
April 1999
CAUTION: These devices are sensitive to electrostatic discharge. Users should follow proper IC Handling Procedures.
Copyright © Harris Corporation 1999
DG526, DG527,
DG528, DG529
Analog CMOS
Latchable Multiplexers
File Number 3139.2
FOR A POSSIBLE SUBSTITUTE PRODUCT
call Central Applications 1-800-442-7747
or email: centapp@harris.com
OBSOLETE PRODUCT