* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1300-B Pioneer St., Brea, CA 92821 Ph:562-697-4332, 800-LED-IDEA; Fax: 562-690-1352 Catalog 995A
A-1
T-1, (3-mm) Round, PCB Mount
Direct View Array, J61XS Series
The J61XS is a T-1 size indicator array designed f or direct vie wing and can be CMOS driv en to sa ve components. The LEDs are located
on 4.57 mm(0.18") centers. The J61XS can be supplied with the desired lamps preassembled from 1 to 9 sections long. (J611S thru
J619S) This series provides easier handling in multiple lamp applications, and can be supplied with any combination of colors. This
series can also be supplied with pinout reversed from that shown by adding “-RL” to the order code of the part number.
Specify part desired as follows:
J61XS/Order Code LED1 + Order Code LED 2 + ... + Order Code LED X
For example: “J618S/4H+4G” designates an assembly with 4 red LEDs followed by 4 green LEDs.
“J618S/(4H+4G)-RL” designates the same assembly with all pins reversed.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp Typical Characteristics Recom.
Op. If
(mA)
Epoxy & Type Color Order Code Peak Vf
(V)
Iv
(mcd) 2
Θ
1/2
λ
(nm) @If=20mA @If=10mA (Deg)
TInted Diffused Red I 639 1.8 4.0 50 2 - 10
Green G 575 1.7 2.5 60 2 - 10
Yellow Y 591 1.85 4.0 45 2 - 10
123 X
... ... ... ... ...
7.4
2.54
ref
5.08
6.35
2.5±.5
3 typ
2.54(0.10)
typ 2.03(0.08)
typ
+ –
(typ for single color)
LED 1
(typ for bi-color)
Green
Anode
Red or
yellow
Anode
