3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round, Jacketed, Flat Cable
.050″ 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series
Physical
Electrical
Note:Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between conductors within a pair.
Environmental
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Jacket Material:Polyvinyl Chloride (PVC); Color: Black
Primary Material: PVC; Color: Gray
Marking Standard: (UL) CL2 75C 28 AWG or AWM 20267 3M NU C AWM II A/B 80C 300V FT1 EU <50V
Conductors: 28 AWG, 7 × 36 AWG [ 7 × ø 0.217 ] Tinned Stranded Copper
Inner Wrap: Polyester Film
Voltage Rating: USA: N.E.C. 725, CL2 or AWM; 300V Canada: 300V EU: <50V
Insulation Resistance: (Primary Cable)> 1 × 1010 Ω/10 ft. [ 3m ]
Unbalanced Balanced
Characteristic Impedance: 90 Ω133 Ω
Capacitance:16.7 pF/ft [ 54.8 pF/m ] 11.9 pF/ft [ 39.0 pF/m ]
Inductance: 0.13 µH/ft [ 0.44 µH/m ] 0.21 µΗ/ft [ 0.69 µΗ/m ]
Propagation Delay: 1.50 ns/ft [ 4.92 ns/m ] 1.58 ns/ft [ 5.18 ns/m ]
Velocity of Propagation: 68% 64%
Temperature Rating: USA: CL2; 75°C or AWM; -20°C to + 80°C Canada: 80°C
Flammability Rating: USA: N.E.C. 725, CL2 Canada: FT1
TS-0070-22
Sheet 1 of 2
• Round construction permits easier routing
• 28 AWG wire on .050 inch centers permits
mass termination to broad line of IDC connectors
• Continuous bond and continuous split/bond
allows for mass termination of IDC connectors
• Available in continuous bond (non–split) wire
for ease of cable fabrication
• Meets external wiring requirements of
National Electrical Code, Article 725 (CL2)
• Primary cable is zippable for branching or
discrete terminations
• UL listed for USA and Canadian markets
• RoHS* compliant
Date Modified: November 15, 2006
UL File No.: E118773, Power Limited Circuit Cable: CL2 (or AWM Style 20267)
3
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round, Jacketed, Flat Cable
.050″ 28 AWG Stranded, Mass-Term, PVC/PVC 3759 Series
Number of
Conductors
3M Part
Number
Diameter A ± .03 Dimension B
(See Note 2)
09 3759/09 0.26 [ 6.6 ] 0.40 [ 10.2 ]
10 3759/10 0.26 [ 6.6 ] 0.45 [ 11.4 ]
14 3759/14 0.27 [ 6.9 ] 0.65 [ 16.5 ]
15 3759/15 0.27 [ 6.9 ] 0.70 [ 17.8 ]
16 3759/16 0.27 [ 6.9 ] 0.75 [ 19.1 ]
20 3759/20 0.30 [ 7.6 ] 0.95 [ 24.1 ]
24 3759/24 0.33 [ 8.4 ] 1.15 [ 29.2 ]
25 3759/25 0.33 [ 8.4 ] 1.20 [ 30.5 ]
26 3759/26 0.33 [ 8.4 ] 1.25 [ 31.8 ]
30 3759/30 0.37 [ 9.4 ] 1.45 [ 36.8 ]
34 3759/34 0.37 [ 9.4 ] 1.65 [ 41.9 ]
36 3759/36 0.39 [ 9.9 ] 1.75 [ 44.5 ]
37 3759/37 0.39 [ 9.9 ] 1.80 [ 45.7 ]
40 3759/40 0.39 [ 9.9 ] 1.95 [ 49.5 ]
50 3759/50 0.44 [ 11.2 ] 2.45 [ 62.2 ]
60 3759/60 0.47 [ 11.9 ] 2.95 [ 74.9 ]
64 3759/64 0.50 [ 12.7 ] 3.15 [ 80.0 ]
TS-0070-22
Sheet 2 of 2
Notes:
1. Red marking on one edge of primary cable designates wire #1.
2. Dimension B pertains to bonded area only.
Inch
[mm]
±.010
±.1 ±.05
Tolerance Unless Noted
.0 .00 .000
Inch
[ ] Dimensions for
Reference only
Ordering Information
øA B
Bonded
Split 1.0 Ref.
[25]
28 AWG, 7 X 36 AWG [ 7 X ø 0.127 ]
Tinned Stranded Copper Conductors
PVC Primary Insulation
Polyester Film
2.4 Ref
[ 61 ]
Paper
[ Mfgr. Option ]
.026 Min [ 0.66 ]
PVC Jacket
.050 Typ
[ 1.27 ]
3759/XX XX X00 XX
Blank = Standard
C = Canadian Certified Version
Number of Conductors
(See Table)
Blank = Standard
SF = Splice Free
Length of Roll in Feet
100 = 100 ft Standard
300 = 300 ft Standard
Blank = Continuous Split/Bonded Wire (Standard)
SO = Continuously Bonded Wire (No Split)
Note: Contact 3M for availability of additional
conductor counts and/or custom roll lengths.
3
Printed in USA.
Minimum 10%
Post-Consumer Fiber
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics © 3M 2006
