AZ987 30 AMP MICRO AUTOMOTIVE RELAY FEATURES * * * * * * Up to 30 Amp switching capability in a compact size Form A and C contacts available Vibration and shock resistant ISO/TS 16949, ISO9001, ISO14000 Designed for high in-rush applications Cost effective CONTACTS Arrangement Ratings GENERAL DATA SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 480W Max. switched current: 30A / 25A (N.O. / N.C.) Max. switched voltage: 16VDC Rated load: 30A at 16VDC Material Silver tin oxide (silver nickel available - contact factory) Resistance < 50 milliohms initially (6V, 1A voltage drop method) COIL Power At Pickup Voltage (typical) 187mW Life Expectancy Mechanical Electrical Minimum operations 1 x 107 3 x 105 at 20A, 14VDC Res. N.O. Operate Time (typical) 4ms at nominal coil voltage Release Time (typical) 2ms at nominal coil voltage (with no coil suppression) 500Vrms coil to contact Dielectric Strength (at sea level for 1 min.) 500Vrms between open contacts Insulation Resistance 100 megohms min. at 20C, 500VDC 50% RH Dropout Greater than 12.5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40C (-40F) to 105C (221F) -40C (-40F) to 155C (311F) Vibration 6 g at 10-500 Hz Shock 30 g, 6 ms Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Continuous Dissipation 2.6W at 20C (68F) ambient Max Solder Temp. 270C (518F) Temperature Rise 34C (61F) at nominal coil voltage Max Solder Time 5 seconds 155C (311F) Max Solvent Temp. 80C (176F) Max Immersion Time 30 seconds Weight 4 grams Max Temperature NOTES 1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice. 3/08/19 AZ987 RELAY ORDERING DATA STANDARD RELAYS - 1 FORM A, 1 FORM C ORDER NUMBER COIL SPECIFICATIONS Nominal Coil VDC 6 10 12 Must Operate VDC 3.5 5.7 6.9 Max. Continuous VDC 13.2 22.0 26.0 Coil Resistance 10% 63 181 254 1 Form A (SPST) AZ987-1A-6DT AZ987-1A-10DT AZ987-1A-12DT 1 Form C (SPDT) AZ987-1C-6DT AZ987-1C-10DT AZ987-1C-12DT * Substitute "DET" in place of "DT" for epoxy sealed version. MECHANICAL DATA Outline Dimensions Wiring Diagram Form A,C .484 MAX (12.30) .098 .024 (2.50) (0.60) .301 (7.65) .016 (0.40) .402 (10.20) .110 (2.80) .037 (0.95) .315 (8.00) 2-O.067 (O1.7) O.071 (O1.80) .276 (7.00) .142 (3.60) .118 (3.00) .402 (10.20) .228 (5.80) .315 (8.00) .054 (1.36) .520 MAX (13.2) 2-O(0.020) O(0.50) .039 (1.00) .039 (1.00) .020 (0.50) FORM A FORM C .11 (83.00) .402 .142 (3.60) (10.20) 2- O0.020 O(0.50 ) 2- 0.047 x 0.024 (1.20 x 0.60) FORM A,C Viewed Toward Terminals .020 (0.50) BOTTOM VIEW Dimensions in inches with millimeters in brackets below. Tolerance: .010" 3/08/19