10/2008
AWT6132R
415 MHz CDMA 3.4V/29.5dBm
Linear Power Amplier Module
Data Sheet - Rev 2.1
M5 Package
7 Pin 6 mm x 6 mm x 1.5 mm
Surface Mount Module
FEATURES
• InGaP HBT Technology
• High Efciency 35 % CDMA
• Low Leakage Current (<5 µA)
• SMT Module Package
• 50 Ω Input and Output Matching
• Shut Down and Mode Control
• CDMA 2000 1XRTT Compliant
• RoHS Compliant Package, 250 oC MSL-3
APPLICATIONS
• CDMA/EVDO 415 MHz Wireless Handsets and
Data Devices
PRODUCT DESCRIPTION
The AWT6132R is a high power, high efficiency
amplifier module for CDMA wireless handset
applications. The device is manufactured on an
advanced InGaP HBT MMIC technology offering
state-of-the-art reliability, temperature stability and
ruggedness. A low power mode is available to reduce
power drain on the system battery. The 6 mm x 6
mm x 1.5 mm laminate package is self contained,
incorporating 50 Ω input and output matching networks
optimized for output power, linearity, and efciency.
Figure 1: Block Diagram
AWT6132R
2MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
RF
OUT
VREF
RFIN 2
3
6
4
7
VMODE
5VCC
GND
1
GND
V
CC
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
PIN NAME DESCRIPTION
1 V
CC
Supply Voltage
2RF
IN
RF Input Signal
3 V
REF
Reference Voltage
4 V
MODE
Mode Control
5 V
CC
Supply Voltage
6RF
OUT
RF Output
7GND Ground
MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
3
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions dened in the electrical specications.
Notes:
(1) For operation at Vc c = +3.2 V , POUT is derated by 0.5 dB.
PARAMETER MIN MAX UNIT
Supply Voltage (VCC ) 0+5 V
Mode Control Voltage (VMODE)0+3.4 V
Reference Voltage (VREF)0+3.4 V
RF Input Power (PIN)-+10 dBm
Storage Temperature (TSTG)-40 +150 °C
PARAMETER MIN TYP MAX UNIT COMMENTS
Operating Frequency (f) 410 -420 MHz
Supply Voltage (VCC)+3.2 +3.4 +4.2 V
Reference Voltage (VREF)+2.80
0
+2.90
-
+3.1
+0.5 VPA"on"
PA"shut down"
Mode Control Voltage (VMODE)+2.5
0
+2.90
-
+3.1
+0.5 VLow Bias Mode
High Bias Mode
RF Output Power (POUT)+29.0
(1)
+29.5 -dBm CDMA, VCC =+3.4V
Case Temperature (TC)-30 -+90
o
C
4MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
Table 4: Electrical Specications – CDMA Operation
(TC = +25 OC, VCC = +3.4 V, VREF = +2.90 V, 50 Ω system)
Notes:
(1) POUT is derated by 0.5 dB for IS-98 / CDMA 2000 operation.
(2) ACPR and Efciency Measured at 415 MHz.
PARAMETER MIN TYP MAX UNIT COMMENTS
Gain 26
25
28
27
31
29 dB P
OUT
= +29.5 dBm, V
MODE
= 0 V
P
OUT
= +16 dBm, V
MODE
= +2.90 V
Gain Variation -0.4 1.0 dB
Adjacent Channel Power
at 885 kHz offset
(1)
Primary Channel BW = 1.23 MHZ
Adjacent Channel BW = 30 kHz
-
-
-52
-57
-46.5
-47 dB P
OUT
= +29.5 dBm, V
MODE
= 0 V
P
OUT
= +16 dBm, V
MODE
= +2.90 V
Adjacent Channel Power
at 1.98 MHz offset
(1)
Primary Channel BW = 1.23 MHZ
Adjacent Channel BW = 30 kHz
-
-
-62
-67
-59
-59 dB P
OUT
= +29.5 dBm, V
MODE
= 0 V
P
OUT
= +16 dBm, V
MODE
= +2.90 V
Power-Added Efficiency
(1)
33
6
35
7
-
-%P
OUT
= +29.5 dBm, V
MODE
= 0 V
P
OUT
= +16 dBm, V
MODE
= +2.90 V
Quiescent Current (Icq) -60 80 mA through V
CC
pins, V
MODE
= +2.90 V
Reference Current -6.5 9mA through V
REF
pin, PA "on"
Mode Control Current -0.8 1.0 mA through V
MODE
pin,
V
MODE
= +2.90 V
Leakage Current -<1 5AV
CC
= +4.2 V, V
REF
= 0 V,
V
MODE
= 0 V
Noise in Receive Band --132 -130 dBm/Hz f
O
+10 MHz, P
OUT
< +29.5 dBm
Harmonics
2fo
3fo, 4fo
-
-
-36
-45
-30
-35 dBc P
OUT
< +29.5 dBm
Input Impedance - - 2:1 VSWR
Spurious Output Level
(all spurious outputs) - - -70 dBc
P
OUT
< +29.5 dBm
In-band Load VSWR < 5:1
Out-of-band Load VSWR < 10:1
Applies over all operating ranges
Load mismatch stress with no
permanent degradation or failure 10:1 - - VSWR Applies over all operating ranges
MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
5
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
Shutdown Mode
The power amplier may be placed in a shutdown
mode by applying logic low levels (see Operating
Ranges table) to both the VREF and VMODE voltages.
Figure 3: Application Circuit Schematic
High Bias Mode
The power amplier may be placed in a high bias mode
by applying a logic low level (see Operating Ranges
table) to the VMODE voltage.
(50 Ohms) (50 Ohms)
RF Input
4.7uF
0.1uF 4.7uF (ceramic)
GND at slug (pad)
Bias Control
1
43
6
7
2
5
GND
VCC
VCC
VREF
VMODE
RF Out
(ceramic)
6MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
PACKAGE OUTLINE
Figure 4: M5 Package Outline - 7 Pin 6 x 6 x 1.5 mm Surface Mount Module (Low Band )
Figure 5: Branding Specication
MASTER DATA SHEET - Rev 2.1
10/2008
AWT6132R
7
COMPONENT PACKAGING
Figure 6: Tape & Reel Packaging
Table 5: Tape & Reel Dimensions
PACKAGE TYPE TAPE WIDTH POCKET PITCH REEL CAPACITY MAX REEL DIA
6 mm x 6 mm x 1.5 mm 12 mm 8 mm 2500 13"
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
IMPORTANT NOTICE
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to
verify that the information they are using is current before placing orders.
MASTER DATA SHEET - Rev 2.1
10/2008
8
AWT6132R
ORDERING INFORMATION