SURFACE MOUNT DISPLAY KPSC03-106 SUPER BRIGHT ORANGE Description Features 0.3 INCH DIGIT HEIGHT. The Super Bright Orange source color devices are made LOW CURRENT OPERATION. with DH InGaAlP on GaAs substrate Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 550PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 1 OF 4 Selection Guide Part No. Dice KPSC03-106 Lens Type SUPER BRIGHT ORANGE (InGaAlP) WHITE DIFFUSED Iv (ucd) @ 10 mA Description Min. Typ. 4700 21371 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D Dominant Wavelength 1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 2 OF 4 Super Bright Orange KPSC03-106 SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 3 OF 4 KPSC03-106 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG PAGE: 4 OF 4