SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
SURFACE MOUNT DISPLAY
Package Dimensions & Internal Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. Specifications are subject to change without notice.
KPSC03-106 SUPER BRIGHT ORANGE
Description
The Super Bright Orange source color devices are made
with DH InGaAlP on GaAs substrate Light Emitting Diode.
Features
0.3 INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE.
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 550PCS / REEL.
RoHS COMPLIANT.
SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
Selection Guide
Part No. Dice Lens Type Iv (ucd)
@ 10 mA
Min. Typ.
KPSC03-106 SUPER BRIGHT ORANGE (InGaAlP) WHITE DIFFUSED 4700 21371 Common Cathode, Rt.
Hand Decimal.
Description
Electrical / Optical Characteristics at TA=25°C
Absolute Maximum Ratings at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Parameter Super Bright Orange Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 195 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Symbol Parameter Device Typ. Max. Test ConditionsUnits
λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA
λDDominant Wavelength Super Bright Orange 601 nm IF=20mA
∆λ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA
C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz
VFForward Voltage Super Bright Orange 2.1 2.5 V IF=20mA
IRReverse Current Super Bright Orange 10 uA VR = 5V
SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 PAGE: 3 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
Super Bright Orange KPSC03-106
SPEC NO: DSAB1990 REV NO: V.7 DATE: AUG/22/2005 PAGE: 4 OF 4
APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.W.WANG
KPSC03-106
Recommended Soldering Pattern
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity/ luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Tape Specifications
(Units : mm)
