Pilkor components Metallized Polyester film capacitors PCMT 368 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5mm (reduced pitch : 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) 0.01 to 6.8 Capacitance tolerance 10%, 5% Rated voltage VRdc 100 V, 250 V, 400 V, 630 V Climatic category 55/105/56 Rated temperature 85 Maximum application temperature 105 Reference specification IEC 60384-2 FEATURES APPLICATIONS . Low inductive wound cell of Metallized . Blocking and coupling (PETP) film . Bypass and energy reservoir application . Cell protected by epoxy lacquer . Radial leads of solder coated wire . Resistant to solvents and rinsing liquids 65 Pilkor components Metallized Polyester film capacitors PCMT 368 Ordering Information l l l b h h k F k h k H H lt P P P0 A < Figure A > Po < Figure B > PCMT 368 X X dt < Figure C > XXX Capacitance Type series k = 4 1.3mm 0 50 Code Voltage 2 100V 4 250V 5 400V 6 630V Available versions Product (lmax) Code Packing method C-tol. 1 Loose in box 10% A lt = 25.02.0mm Hole to hole ( Po) - 10.0 15.0 22.5 27.5 2 Loose in box 5% A lt = 25.02.0mm - 10.0 15.0 22.5 27.5 3 Loose in box 10% A lt = 5.01.0mm - 10.0 15.0 22.5 27.5 4 Loose in box 5% A lt = 5.01.0mm - 10.0 15.0 22.5 27.5 A Loose in box 10% A lt = 25.02.0mm - 7.5 7.5 20.0 20.0 B Loose in box 5% A lt = 25.02.0mm - 7.5 7.5 20.0 20.0 C Loose in box 10% A lt = 5.01.0mm - 7.5 7.5 20.0 20.0 D Loose in box 5% A lt = 5.01.0mm - 7.5 7.5 20.0 20.0 5 Ammo packing 10% C H=16mm 12.7mm 10.0 15.0 22.5 27.5 6 Ammo packing 5% C H=16mm 12.7mm 10.0 15.0 22.5 27.5 7 Ammo packing 10% C H=16mm 15.0mm 10.0 15.0 22.5 27.5 Lead Figure Lead length & Height 12.5 18.0 26.0 31.0 Pitch (P) 8 Ammo packing 5% C H=16mm 15.0mm 10.0 15.0 22.5 27.5 E Ammo packing 10% C H=16mm 12.7mm 7.5 7.5 20.0 20.0 F Ammo packing 5% C H=16mm 12.7mm 7.5 7.5 20.0 20.0 G Ammo packing 10% C H=16mm 15.0mm 7.5 7.5 20.0 20.0 H Ammo packing 5% C H=16mm 15.0mm 7.5 7.5 20.0 20.0 K Taped on reel 10% C H=16mm 15.0mm 10.0 15.0 22.5 27.5 L Taped on reel 5% C H=16mm 15.0mm 10.0 15.0 22.5 27.5 M Taped on reel 10% C H=16mm 15.0mm 7.5 7.5 20.0 20.0 N Taped on reel 5% C H=16mm 15.0mm 7.5 7.5 20.0 20.0 P Ammo packing 10% B H=16mm 15.0mm - 7.5 - - Q Ammo packing 5% B H=16mm 15.0mm - 7.5 - - 66 Pilkor components Metallized Polyester film capacitors PCMT 368 Packaging Information SMALLEST PACKING QUANTITIES (SPQ) lt = 252.0 mm lt = 51.0 mm DIMENSIONS SPQ SPQ 4.5 x 15.5 x 12.5 4.5 x 16.5 x 12.5 5.0 x 16.0 x 12.5 5.0 x 17.0 x 12.5 5.5 x 16.5 x 12.5 5.5 x 17.5 x 12.5 6.0 x 17.0 x 12.5 6.0 x 18.0 x 12.5 6.5 x 17.5 x 12.5 6.5 x 18.5 x 12.5 5.0 x 16.5 x 18.0 5.5 x 17.0 x 18.0 6.0 x 17.5 x 18.0 6.5 x 18.0 x 18.0 7.0 x 18.5 x 18.0 7.0 x 21.5 x 18.0 7.5 x 19.0 x 18.0 7.5 x 22.0 x 18.0 8.0 x 19.5 x 18.0 8.0 x 22.5 x 18.0 8.5 x 20.0 x 18.0 6.0 x 20.0 x 26.0 6.5 x 20.5 x 26.0 7.5 x 21.5 x 26.0 8.0 x 22.0 x 26.0 8.5 x 22.5 x 26.0 9.5 x 23.5 x 26.0 10.5 x 24.5 x 26.0 11.5 x 25.5 x 26.0 13.0 x 27.0 x 26.0 14.5 x 28.5 x 26.0 10.5 x 24.5 x 31.0 12.0 x 26.0 x 31.0 13.5 x 27.5 x 31.0 14.5 x 28.5 x 31.0 15.5 x 29.5 x 31.0 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 250 250 250 250 250 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 500 500 500 500 250 250 250 250 250 Loose in box 67 Pilkor components Metallized Polyester film capacitors VRdc = 100 V Cap. () 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 PCMT 368 VRac = 63 V~ Pitch = 10.0 0.4 mm CATALOGUE NUMBER PCMT 368 ..... Mass loose in box (g) C-tol. 5% lt = 252.0 lt = 51.0 dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm 5.0 x 16.0 x 12.5 5.5 x 16.5 x 12.5 6.0 x 17.0 x 12.5 6.5 x 17.5 x 12.5 Pitch = 15.0 0.4 mm 0.5 PCMT 368 22394 PCMT 368 24394 0.6 PCMT 368 22474 PCMT 368 24474 0.7 PCMT 368 22564 PCMT 368 24564 0.8 PCMT 368 22684 PCMT 368 24684 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm bxhxl (mm) 5.5 x 17.0 x 18.0 6.0 x 17.5 x 18.0 6.5 x 18.0 x 18.0 7.0 x 18.5 x 18.0 7.5 x 19.0 x 18.0 8.5 x 20.0 x 18.0 Pitch = 22.5 0.4 mm 6.5 x 20.5 x 26.0 7.5 x 21.5 x 26.0 8.0 x 22.0 x 26.0 8.5 x 22.5 x 26.0 9.5 x 23.5 x 26.0 10.5 x 24.5 x 26.0 0.9 1.1 1.3 1.6 1.9 2.2 PCMT 368 22824 PCMT 368 22105 PCMT 368 22125 PCMT 368 22155 PCMT 368 22185 PCMT 368 22225 PCMT 368 24824 PCMT 368 24105 PCMT 368 24125 PCMT 368 24155 PCMT 368 24185 PCMT 368 24225 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm 2.6 PCMT 368 22275 PCMT 368 24275 3.0 PCMT 368 22335 PCMT 368 24335 3.5 PCMT 368 22395 PCMT 368 24395 4.0 PCMT 368 22475 PCMT 368 24475 4.6 PCMT 368 22565 PCMT 368 24565 5.2 PCMT 368 22685 PCMT 368 24685 68 Pilkor components Metallized Polyester film capacitors VRdc = 250 V Cap. () 0.10 0.12 0.15 0.18 0.22 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 PCMT 368 VRac = 160 V~ bxhxl (mm) Pitch = 10.0 0.4 mm 4.5 x 15.5 x 12.5 4.5 x 15.5 x 12.5 5.0 x 16.0 x 12.5 5.5 x 16.5 x 12.5 6.0 x 17.0 x 12.5 Pitch = 15.0 0.4 mm 5.0 x 16.5 x 18.0 5.0 x 16.5 x 18.0 5.5 x 17.0 x 18.0 5.5 x 17.0 x 18.0 6.0 x 17.5 x 18.0 6.5 x 18.0 x 18.0 7.0 x 18.5 x 18.0 8.0 x 19.5 x 18.0 8.0 x 22.5 x 18.0 Pitch = 22.5 0.4 mm 6.5 x 20.5 x 26.0 7.5 x 21.5 x 26.0 8.5 x 22.5 x 26.0 9.5 x 23.5 x 26.0 10.5 x 24.5 x 26.0 11.5 x 25.5 x 26.0 13.0 x 27.0 x 26.0 14.5 x 28.5 x 26.0 Pitch = 27.5 0.4 mm 14.5 x 28.5 x 31.0 CATALOGUE NUMBER PCMT 368 ..... Mass loose in box (g) C-tol. 5% lt = 252.0 lt = 51.0 dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm 0.3 PCMT 368 42104 PCMT 368 44104 0.4 PCMT 368 42124 PCMT 368 44124 0.4 PCMT 368 42154 PCMT 368 44154 0.5 PCMT 368 42184 PCMT 368 44184 0.6 PCMT 368 99102 PCMT 368 99104 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm PCMT 368 44224 0.6 PCMT 368 42224 PCMT 368 42274 PCMT 368 44274 0.7 PCMT 368 42334 PCMT 368 44334 0.8 PCMT 368 44394 1.0 PCMT 368 42394 PCMT 368 42474 PCMT 368 44474 1.2 PCMT 368 42564 PCMT 368 44564 1.5 1.9 PCMT 368 42684 PCMT 368 44684 2.3 PCMT 368 42824 PCMT 368 44824 PCMT 368 44105 2.8 PCMT 368 42105 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm 3.3 PCMT 368 42125 PCMT 368 44125 3.8 PCMT 368 42155 PCMT 368 44155 PCMT 368 44185 4.4 PCMT 368 42185 PCMT 368 44225 4.9 PCMT 368 42225 PCMT 368 44275 5.3 PCMT 368 42275 PCMT 368 42335 PCMT 368 44335 5.6 6.4 PCMT 368 42395 PCMT 368 44395 PCMT 368 44475 7.4 PCMT 368 42475 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm 9.1 PCMT 368 42565 PCMT 368 44565 69 Pilkor components Metallized Polyester film capacitors VRdc = 400 V Cap. () 0.039 0.047 0.056 0.068 0.082 0.10 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 PCMT 368 VRac = 220 V~ bxhxl (mm) Pitch = 10.0 0.4 mm 5.0 x 16.0 x 12.5 5.5 x 16.5 x 12.5 5.5 x 16.5 x 12.5 6.0 x 17.0 x 12.5 6.0 x 17.0 x 12.5 6.5 x 17.5 x 12.5 Pitch = 15.0 0.4 mm 5.0 x 16.5 x 18.0 5.0 x 16.5 x 18.0 5.5 x 17.0 x 18.0 6.0 x 17.5 x 18.0 6.5 x 18.0 x 18.0 7.0 x 18.5 x 18.0 7.5 x 19.0 x 18.0 7.5 x 22.0 x 18.0 Pitch = 22.5 0.4 mm 6.0 x 20.0 x 26.0 6.5 x 20.5 x 26.0 7.5 x 21.5 x 26.0 8.5 x 22.5 x 26.0 9.5 x 23.5 x 26.0 10.5 x 24.5 x 26.0 Pitch = 27.5 0.4 mm 10.5 x 24.5 x 31.0 12.0 x 26.0 x 31.0 13.5 x 27.5 x 31.0 CATALOGUE NUMBER PCMT 368 ..... Mass loose in box (g) C-tol. 5% lt = 252.0 lt = 51.0 dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm 0.5 PCMT 368 52393 PCMT 368 54393 0.6 PCMT 368 52473 PCMT 368 54473 0.4 PCMT 368 52563 PCMT 368 54563 0.5 PCMT 368 52683 PCMT 368 54683 0.6 PCMT 368 52823 PCMT 368 54823 0.7 PCMT 368 99106 PCMT 368 99108 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm PCMT 368 54104 0.7 PCMT 368 52104 PCMT 368 52124 PCMT 368 54124 0.6 PCMT 368 54154 0.8 PCMT 368 52154 PCMT 368 54184 0.9 PCMT 368 52184 PCMT 368 52224 PCMT 368 54224 1.1 PCMT 368 52274 PCMT 368 54274 1.4 1.5 PCMT 368 52334 PCMT 368 54334 1.5 PCMT 368 52394 PCMT 368 54394 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm 2.7 PCMT 368 52474 PCMT 368 54474 3.1 PCMT 368 52564 PCMT 368 54564 3.6 PCMT 368 52684 PCMT 368 54684 3.9 PCMT 368 52824 PCMT 368 54824 4.0 PCMT 368 52105 PCMT 368 54105 4.6 PCMT 368 52125 PCMT 368 54125 dt = 0.8 mm +0.08 / -0.05 A = 2.5 +1.0/-0.5 mm 6.7 PCMT 368 52155 PCMT 368 54155 7.6 PCMT 368 52185 PCMT 368 54185 9.0 PCMT 368 52225 PCMT 368 54225 70 Pilkor components Metallized Polyester film capacitors VRdc = 630 V Cap. () VRac = 250 V~ bxhxl (mm) Pitch = 10.0 0.4 mm 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 4.5 x 16.5 x 12.5 4.5 x 16.5 x 12.5 4.5 x 16.5 x 12.5 4.5 x 16.5 x 12.5 5.0 x 17.0 x 12.5 5.0 x 17.0 x 12.5 5.5 x 17.5 x 12.5 6.0 x 18.0 x 12.5 6.5 x 18.5 x 12.5 Pitch = 15.0 0.4 mm 0.056 0.068 0.082 0.10 0.12 0.15 5.5 x 17.0 x 18.0 6.0 x 17.5 x 18.0 6.5 x 18.0 x 18.0 7.5 x 19.0 x 18.0 7.0 x 21.5 x 18.0 7.5 x 22.0 x 18.0 Pitch = 22.5 0.4 mm 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 6.5 x 20.5 x 26.0 7.5 x 21.5 x 26.0 8.5 x 22.5 x 26.0 9.5 x 23.5 x 26.0 10.5 x 24.5 x 26.0 11.5 x 25.5 x 26.0 13.0 x 27.0 x 26.0 14.5 x 30.0 x 26.0 Pitch = 27.5 0.4 mm 0.82 1.0 PCMT 368 14.5 x 28.5 x 31.0 15.5 x 29.5 x 31.0 CATALOGUE NUMBER PCMT 368 ..... Mass loose in box (g) C-tol. 5% lt = 252.0 lt = 51.0 dt = 0.6 mm +0.06 / -0.05 A = 2.0 +1.0/-0.5 mm 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.8 PCMT 368 62103 PCMT 368 62123 PCMT 368 62153 PCMT 368 62183 PCMT 368 62223 PCMT 368 62273 PCMT 368 62333 PCMT 368 62393 PCMT 368 62473 dt = 0.8 mm +0.08 / -0.05 0.9 1.1 1.3 1.5 1.7 2.0 PCMT 368 62563 PCMT 368 62683 PCMT 368 62823 PCMT 368 62104 PCMT 368 62124 PCMT 368 62154 dt = 0.8 mm +0.08 / -0.05 2.9 3.5 3.7 4.3 4.9 5.7 6.7 7.6 PCMT 368 62184 PCMT 368 62224 PCMT 368 62274 PCMT 368 62334 PCMT 368 62394 PCMT 368 62474 PCMT 368 62564 PCMT 368 62684 dt = 0.8 mm +0.08 / -0.05 7.8 8.0 PCMT 368 62824 PCMT 368 62105 71 PCMT 368 64103 PCMT 368 64123 PCMT 368 64153 PCMT 368 64183 PCMT 368 64223 PCMT 368 64273 PCMT 368 64333 PCMT 368 64393 PCMT 368 64473 A = 2.5 +1.0/-0.5 mm PCMT 368 64563 PCMT 368 64683 PCMT 368 64823 PCMT 368 64104 PCMT 368 64124 PCMT 368 64154 A = 2.5 +1.0/-0.5 mm PCMT 368 64184 PCMT 368 64224 PCMT 368 64274 PCMT 368 64334 PCMT 368 64394 PCMT 368 64474 PCMT 368 64564 PCMT 368 64684 A = 2.5 +1.0/-0.5 mm PCMT 368 64824 PCMT 368 64105 Pilkor components Metallized Polyester film capacitors PCMT 368 CONSTRUCTION metallized polyester film metal spray layer connecting wire Description . Low-inductive wound cell of Metallized polyethyleneterephthalate film . Protected by a hard, water repellent, solvent resistant epoxy lacquer . Radial leads, solder-coated. MOUNTING NORMAL USE The capacitors are designed for mounting on printed-wiring boards. The capacitors packed in bandollers are designed for mounting on printed-wiring boards by means of automatic insertion machines. For detailed specifications refer to chapter PACKING SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-wiring board. . For pitches of 15 mm the capacitors shall be mechanically fixed by the leads. . For larger pitches the capacitors shall be mounted in the same way and the body clamped. STORAGE TEMPERATURE . Storage temperature : Tstg = -25 to +40 with RH maximum 80% witout condensation. RATINGS AND CHARACTERISTICS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 231, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 502%. For reference testing, a conditioning period shall be applied over 964 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 72 Pilkor components Metallized Polyester film capacitors PCMT 368 CHARACTERISTICS Dissipation Factor Rated voltage Capacitance 100 V Tangent of loss angle ( x 10-4 ) 1 KHz 10 KHz 100 KHz 0.39 < C 0.47 0.47 < C 6.8 75 75 120 120 225 - 250 V 0.1 < C 0.47 0.47 < C 5.6 < 75 < 75 < 120 < 120 < 225 - 400 V C 0.1 0.1 C 0.47 C > 0.47 < 75 < 75 < 75 < 120 < 120 < 120 < 200 < 225 - 630 V C 0.1 0.1 < C 0.47 C > 0.47 < 75 < 75 < 75 < 120 < 120 < 120 < 200 < 225 - Insulation Resistance The insulation resistance is measured after a voltage has been applied for 1 minute 5 seconds, the voltage being 10015V for the 100, 250 and 400V versions and 50050V for the 630V versions. Rated voltage Capacitance R between leads () RC between leads (sec) 100 V C 0.33 - 5 000 s C 0.33 30 000 - C 0.33 - 10 000 s 250 V / 400 V / 630 V Rated Voltage Pulse Load Slope (dV/dt)R For values see specific reference data. If the pulse voltage is lower than the rated voltage, the values of the specific reference data mast be multiplied by VRdc and divided by the applied voltage Rated voltage Rated pulse load(V/) as a function of lmax lmax = 12.5mm lmax = 18.0mm lmax = 26.0mm lmax = 31.0mm 100 V 30 20 20 - 250 V 120 45 20 15 400 V 170 65 30 25 630 V 90 90 35 30 73 Pilkor components Metallized Polyester film capacitors PCMT 368 THE GRAPHS OF CHARACTERISTICS 3 C/C 2 2 C/C 400V-630V 1 1 250V 0 0 -1 -2 -1 100V -3 -2 -4 -5 -60 -3 10 2 10 3 10 4 f(Hz) 10 -20 20 60 100 Tamb() 5 Capacitance as a function of ambient free air temperature, Measured at 1kHz , 1V ; typical curve Capacitance change at 1kHz as a function of frequency ; typical curve 10 1.2 3 factor dissipation 1.0 0.8 0.6 10 2 10 1 0.4 0.2 0.0 -60 -40 -20 0 20 40 60 80 10 100 2 10 3 10 4 f(Hz) Tamb() Multiplying factor as a function of temperature 10 Tangent of loss angle as a function of frequency : typical curve 5 RC(S) 10 4 10 3 10 2 -50 0 50 Tamb() 100 RC-product as a function of ambient free air temperature ; typical curve 74 10 5 Pilkor components Metallized Polyester film capacitors PCMT 368 MAXIMUM RMS VOLTAGE (SINEWAVE) AS A FUNCTION OF FREQUENCY 10 100 AC voltage (V) 3 AC voltage (V) 10 2 10 10 1.5(Imax=12.5mm) 1.0(Imax=12.5mm) 3.9(Imax=12.5mm) 2.2(Imax=12.5mm) 10(Imax=12.5mm) 10(Imax=12.5mm) 1 10 2 10 3 10 4 10 5 f(Hz) 10 1 2 10 6 AC voltage (RMS value) as a function of frequency at Tamb85 for URdc=100V 10 3 10 4 10 5 f(Hz) 10 6 AC voltage (RMS value) as a function of frequency at Tamb85 for URdc=250V 3 10 AC voltage (V) 10 10 3 AC voltage (V) 2 10 100(Imax=12.5mm) 10 2 10 100(Imax=12.5mm) 220(Imax=18.0mm) 220(Imax=18.0mm) 1.0(Imax=26.0mm) 1.0(Imax=26.0mm) 2.2(Imax=31.0mm) 1 10 2 10 3 10 4 10 5 10 6 1 2 10 f(Hz) 10 3 10 4 10 5 10 6 f(Hz) 10 AC voltage (RMS value) as a function of frequency at Tamb85 for URdc=630V AC voltage (RMS value) as a function of frequency at Tamb85 for URdc=400V 75 7 Pilkor components Metallized Polyester film capacitors PCMT 368 APPLICATION NOTE To select this capacitor for a certain application, 6 conditions must be checked : 1. The peak voltage (Vp) shall not be greater than the rated DC voltage. 2. The peak-to-peak voltage (Vp-p) shall not be greater than 22 times the rated AC voltage to avoid the ionization inception level. 3. The peak current (Ip) shall not exceed the maximum peak current, defined as maximum voltage pulse slope (dV/dt) multiplied by the capacitance. Ip max. = C (dV/dt) max Or the voltage pulse slope shall not exceed the rated voltage pulse slope. If the pulse voltage is Lower than the rated voltage, the values of the table may be multiplied by VRdc and divided by the applied voltage. 4. The dissipated power shall not be greater than the maximum permissible power dissipation stated above. 5. The free air ambient temperature for the capacitor is not exceeding the category temperature. 6. Since all metallized film capacitors have an intrinsically active flammability risk, it is recommended that these capacitors should only be used in circuits where the power can be limited to less than 5W to the capacitor should a failure occur. PRODUCT MARKING The capacitors are marked on the side in black ink with the following information : . Rated capacitance code in or . Tolerance on rated capacitance : J = 5 % , K = 1 0 % . Rated DC voltage Example of marking 100n J 250V MKT 220n J 400V 368 MKT (ME) or (ME) Imax = 12.5 Imax = 18.0/26.0/31.0 mm 76