EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 18 Switches- and Indicators 18 Contents 18 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 5 Devices flush mounting ................................................................................. 6 Accessories..................................................................................................... 7 Technical Data............................................................................................... 10 Drawings........................................................................................................ 11 Index............................................................................................................... 15 2 10.2008 18 Description Specimen order Product Information General notes The series 18 comprises compact indicators for direct connection to 2.2, 12 or 24 VDC and illuminated pushbuttons with maintained or momentary action. The illuminated pushbutons are equipped with a snap-action switching system with normally open or normally closed contacts. The dimensions of the front are 9 x 14 mm, 9 x 9 mm or 9 mm dia. Indicators and illuminated pushbuttons for use with overhanging lenses 14 x 14 mm or 14 mm dia. are also available for flush mounting. Mounting Mounting from the front through the mounting hole 8 mm dia. (15.8 x 15.8 mm resp. 16 mm dia. for flush mounting) is assured even with the wiring already attached. The units are provided with soldering terminals. 0 Illuminated pushbutton : - 18-147.035 Illuminated pushbutton actuator, 9 x14 mm, momentary action, 1 normally open, soldering terminal Essential accessories : - Lens with LED plastic yellow, transparent, flush, 9 x 14 mm 18-941.4 We reserve the right to modify technical data All dimensions in mm Lenses The flat lenses are available in various colours and a transparent version. The surface is nonreflecting (matt). Illumination Perfect illumination of the lenses, which can be supplied in various colours, is assured by Bi-Pin T1 LEDs (2.2 VDC) in the colours red, yellow and green. (Compact indicators for connection to 12 or 24 VDC.) The Bi-Pin T1 LED are already integrated in the lenses. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. Position indication The status of a maintained action switch can be determinded by the position of the lens. 3 10.2008 18 Product Assembly Pushbutton illuminative, raised mounting 0 1 1 2 3 4 Lens Switch housing Front planel Fixing nut 1 2 3 4 5 6 Lens Switch housing Front bezel set (upper part) Front panel Front bezel set (lower part) Fixing nut 2 3 4 Pushbutton illuminative, flush mounting 0 1 2 3 4 5 6 4 10.2008 18 Devices raised mounting Indicator O 9 mm Typ-Nr. 18-031.0055 18-031.0052 18-031.0054 18-030.0055 18-030.0052 18-030.0054 18-032.0055 18-032.0052 18-032.0054 Circuit drawing 24 VDC, 20 mA S S S S S S S S S a 9 x 14 mm Typ-Nr. 18-041.0055 18-041.0052 18-041.0054 18-040.0055 18-040.0052 18-040.0054 18-042.0055 18-042.0052 18-042.0054 Technical drawing 2.2 VDC, 20 mA b 9 x 9 mm Typ-Nr. 18-051.0055 18-051.0052 18-051.0054 18-050.0055 18-050.0052 18-050.0054 18-052.0055 18-052.0052 18-052.0054 Mounting dimensions IP 40 Lens Plastic green Plastic red Plastic yellow Plastic green Plastic red Plastic yellow Plastic green Plastic red Plastic yellow Component layout Indicator Operating voltage/-current 12 VDC, 20 mA Terminals Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 Terminals: S = Soldering terminal Component layout from page 11, Mounting dimensions from page 12, Technical drawing from page 12, Circuit drawing from page 13 Illuminated pushbutton actuator Essential Accessories: d Lens with LED page 7 Circuit drawing S S S S O 9 mm Typ-Nr. 18-238.035 18-138.035 18-237.035 18-137.035 Technical drawing 1 NO MA M MA M a 9 x 14 mm Typ-Nr. 18-248.035 18-148.035 18-247.035 18-147.035 Mounting dimensions 1 NC b 9 x 9 mm Typ-Nr. 18-258.035 18-158.035 18-257.035 18-157.035 Component layout SA Terminals Contacts IP 40 Switching action Switching system Illuminated pushbutton actuator Front protection Continuation see next page e 2 2 2 2 1 1 1 1 2 2 2 2 2 4 3 5 0.002 0.002 0.002 0.002 Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S = Soldering terminal Component layout from page 11, Mounting dimensions from page 12, Technical drawing from page 12, Circuit drawing from page 13 5 10.2008 18 Devices flush mounting Indicator actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 8 Circuit drawing 24 VDC, 20 mA O 19 mm Typ-Nr. 18-061.0055 18-061.0052 18-061.0054 18-060.0055 18-060.0052 18-060.0054 18-062.0055 18-062.0052 18-062.0054 Technical drawing 2.2 VDC, 20 mA b 19 x 19 mm Typ-Nr. 18-081.0055 18-081.0052 18-081.0054 18-080.0055 18-080.0052 18-080.0054 18-082.0055 18-082.0052 18-082.0054 Mounting dimensions IP 40 Lens Plastic green S Plastic red S Plastic yellow S Plastic green S Plastic red S Plastic yellow S Plastic green S Plastic red S Plastic yellow S Component layout Indicator actuator, flush mounting Operating voltage/-current 12 VDC, 20 mA Terminals Front protection Continuation see next page e 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 0.003 0.003 0.003 0.002 0.002 0.002 0.003 0.003 0.003 Terminals: S = Soldering terminal Component layout from page 11, Mounting dimensions from page 12, Technical drawing from page 12, Circuit drawing from page 13 Illuminated pushbutton actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 8 d Lens with LED, flush mounting page 7 Circuit drawing S S S S Technical drawing 1 NO MA M MA M O 19 mm Typ-Nr. 18-268.035 18-168.035 18-267.035 18-167.035 Mounting dimensions 1 NC b 19 x 19 mm Typ-Nr. 18-288.035 18-188.035 18-287.035 18-187.035 Component layout SA Terminals Contacts IP 40 Switching action Switching system Illuminated pushbutton actuator, flush mounting Front protection Continuation see next page e 2 2 2 2 2 2 2 2 4 4 4 4 2 4 3 5 0.002 0.002 0.002 0.002 Switching system: SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: S = Soldering terminal Component layout from page 11, Mounting dimensions from page 12, Technical drawing from page 12, Circuit drawing from page 13 6 10.2008 18 Accessories Front Lens without LED Continuation see next page Lens without LED illuminative non-illuminative Lens Plastic green translucent flush Plastic red translucent flush Plastic white translucent flush Plastic yellow translucent flush Plastic black opaque flush Plastic grey opaque flush b 9 x 9 mm Typ-Nr. 18-952.5 18-952.2 18-952.9 18-952.4 18-952.0 18-952.8 a 9 x 14 mm Typ-Nr. 18-942.5 18-942.2 18-942.9 18-942.4 18-942.0 18-942.8 O 9 mm Typ-Nr. 18-932.5 18-932.2 18-932.9 18-932.4 18-932.0 18-932.8 0.001 0.001 0.001 0.001 0.001 0.001 b 9 x 9 mm Typ-Nr. 18-951.5 18-951.2 18-951.4 a 9 x 14 mm Typ-Nr. 18-941.5 18-941.2 18-941.4 O 9 mm Typ-Nr. 18-931.5 18-931.2 18-931.4 0.001 0.001 0.001 b 19 x 19 mm Typ-Nr. 18-982.5 18-982.2 18-982.9 18-982.4 18-982.0 18-982.8 O 19 mm Typ-Nr. 18-962.5 18-962.2 18-962.9 18-962.4 18-962.0 18-962.8 0.001 0.001 0.001 0.001 0.001 0.001 b 19 x 19 mm Typ-Nr. 18-981.5 18-981.2 18-981.4 O 19 mm Typ-Nr. 18-961.5 18-961.2 18-961.4 0.001 0.001 0.001 e Lens with LED Continuation see next page Lens with LED without built-in series resistor, typ. forward voltage 2.2 VDC, 20 mA Lens Plastic green translucent flush Plastic red translucent flush Plastic yellow translucent flush e Lens without LED, flush mounting Continuation see next page Lens without LED, flush mounting illuminative non-illuminative Lens Plastic green translucent flush Plastic red translucent flush Plastic white translucent flush Plastic yellow translucent flush Plastic black opaque flush Plastic grey opaque flush e Lens with LED, flush mounting Continuation see next page Lens with LED, flush mounting without built-in series resistor, typ. forward voltage 2.2 VDC, 20 mA Lens Plastic green translucent flush Plastic red translucent flush Plastic yellow translucent flush e 7 10.2008 18 Accessories Front bezel set, flush mounting Front bezel set, flush mounting for Lens round for Lens square Front bezel Plastic black b 19 x 19 mm Typ-Nr. 18-920.2 Plastic black 18-920.1 O 19 mm Typ-Nr. 18-920.3 Mounting dimensions Continuation see next page e 2 0.006 2 0.006 Mounting dimensions from page 12 Blind plug b 9 x 9 mm Typ-Nr. 19-948.0 Blind plug O 9 mm Typ-Nr. 19-949.0 Mounting dimensions Continuation see next page e 3 0.001 Mounting dimensions from page 12 > Backside PCB plug-in base Technical drawing PCB plug-in base Pins axial Pins bent at right-angles Component layout Terminals Continuation see next page e 3 5 0.001 4 6 0.001 Typ-Nr. 18-910 0.002 P Typ-Nr. 18-945 P 18-946 Terminals: P = PCB terminal Component layout from page 11, Technical drawing from page 12 > Assembling Lens remover Continuation see next page Lens remover 8 10.2008 e 18 Accessories Mounting tool Continuation see next page Mounting tool for Fixing nut long 19-991 Typ-Nr. 19-905 e 0.011 9 10.2008 18 Technical Data Actuator with snap-action switching element Switching system The snap-action switching system was designed for switching low powers in electronic circuits. Single-break snap-action contact. Material Lens Polymethylacrylate (PMMA), Polycarbonate (PC) Material of contact Gold contact on nickel plating Actuator housing Polyamide, colour black Mechanical characteristics Terminals The terminals can be used as soldering terminals. Max.wire diameter: 2 x 0.5 mm Max.wire ccross-section of stranded cable 1 x 0.75 mm Wire cross-section of terminal 1.6 x 0.4 mm Tightening torque for fixing nut max. 20 Ncm Actuating force 1.4 N Actuating travel 2.2 mm 0.2 mm Rebound time 2.5 ms Mechanical lifetime Momentary action 2 million cycles of operation Maintained action 1 million cycles of operation, as per IEC 60512-5-9a Electrical characteristics Contact resistance 100 m starting value (initial), as per IEC 60512-2-2b Electrical life 500 000 cycles of operation at 30 VDC, 100 mA, as per IEC 60512-5-9c Power consumption LED 20 mA Switch rating min. 10 A at 100 V max. 100 mA at 42 VAC/VDC Electric strength 500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60512-2-11 Environmental conditions Storage temperature -40 C ... +80 C 10 10.2008 Service temperature -25 C ... +65 C Protection degree IP 40 front side, as per IEC 60529 Shock resistance (Single impacts, semi-sinusodial) 50 g for 11 ms, as per IEC 60068-2-27 Vibration resistance (sinusoidal)10 g at 10-2000 Hz, amplitude 0.75 mm, as per IEC 60512-4-4 Approvals Declaration of conformity RoHS 18 Drawings Component layout 1 Indicator page 5 9 x 9 mm 9 x 14 mm + O9 mm + + 2 Illuminated pushbutton actuator page 5 | Indicator actuator, flush mounting page 6 | Illuminated pushbutton actuator, flush mounting page 6 9 x 9 mm 9 x 14 mm + 1 O9 mm + X 1 + X 1 X X contact-nr. 2 = NO 4 = NC 3 PCB plug-in base page 8 Drilling plan (element side) Through-connection recommended 2.54 2.54 + 4x O1.1 8.8 1 2.54 1.6 9.2 4 PCB plug-in base page 8 Drilling plan (element side) Through-connection recommended 2x O1.1 10.16 2.54 2.54 Pins for mounting + 8.8 1 2.54 2.3 11.7 4x O1.1 Pins for contact / LED 11 10.2008 18 Drawings Mounting dimensions 1 Indicator page 5 | Illuminated pushbutton actuator page 5 8 +0.2 0 8 9 min. 9 min. O9 mm 9 min. 9 x 14 mm 9 min. 9 x 9 mm +0.2 0 8 +0.2 0 14 min. 9 min. 2 Indicator actuator, flush mounting page 6 | Illuminated pushbutton actuator, flush mounting page 6 | Front bezel set, flush mounting page 8 19 min. 19 min. 15.8 + - 0.05 16 15.8 -+ 0.05 15.8 -+ 0.05 19 min. 19 min. 3 Blind plug page 8 O9 mm 9 min. 9 min. 9 x 9 mm 8 + 0.2 0 8 +0.2 0 9 min. 9 min. Technical drawing 1 Indicator page 5 9 x 14 4 max. 7.2 23 12 10.2008 O19 mm 19 x 19 mm 15.8 -+ 0.05 19 min. 19 x 19 mm 9x9 O9 + 0.3 0 19 min. 18 Drawings 2 Illuminated pushbutton actuator page 5 8.7 9x9 9 x 14 4 max. O9 23 3 Indicator actuator, flush mounting page 6 19 x 19 4 max. 1 19 x 19 O19 30.5 4 Illuminated pushbutton actuator, flush mounting page 6 19 x 19 4 max. 1 19 x 19 O19 30.5 9.2 5 PCB plug-in base page 8 11.7 3.2 8.8 5.6 9.2 6 PCB plug-in base page 8 11.7 3.35 8.8 Circuit drawing 1 Indicator page 5 | Indicator actuator, flush mounting page 6 13 10.2008 Drawings 2 Illuminated pushbutton actuator page 5 | Illuminated pushbutton actuator, flush mounting page 6 2 1 3 Illuminated pushbutton actuator page 5 | Illuminated pushbutton actuator, flush mounting page 6 4 1 4 Illuminated pushbutton actuator page 5 | Illuminated pushbutton actuator, flush mounting page 6 2 1 5 Illuminated pushbutton actuator page 5 | Illuminated pushbutton actuator, flush mounting page 6 4 1 14 10.2008 18 Index from Typ-Nr. Typ-Nr. Page 18-030.0052 ................................. 5 18-030.0054 ................................. 5 18-030.0055 ................................. 5 18-031.0052 ................................. 5 18-031.0054 ................................. 5 18-031.0055 ................................. 5 18-032.0052 ................................. 5 18-032.0054 ................................. 5 18-032.0055 ................................. 5 18-040.0052 ................................. 5 18-040.0054 ................................. 5 18-040.0055 ................................. 5 18-041.0052 ................................. 5 18-041.0054 ................................. 5 18-041.0055 ................................. 5 18-042.0052 ................................. 5 18-042.0054 ................................. 5 18-042.0055 ................................. 5 18-050.0052 ................................. 5 18-050.0054 ................................. 5 18-050.0055 ................................. 5 18-051.0052 ................................. 5 18-051.0054 ................................. 5 18-051.0055 ................................. 5 18-052.0052 ................................. 5 18-052.0054 ................................. 5 18-052.0055 ................................. 5 18-060.0052 ................................. 6 18-060.0054 ................................. 6 18-060.0055 ................................. 6 18-061.0052 ................................. 6 18-061.0054 ................................. 6 18-061.0055 ................................. 6 18-062.0052 ................................. 6 18-062.0054 ................................. 6 18-062.0055 ................................. 6 18-080.0052 ................................. 6 18-080.0054 ................................. 6 18-080.0055 ................................. 6 18-081.0052 ................................. 6 18-081.0054 ................................. 6 18-081.0055 ................................. 6 18-082.0052 ................................. 6 18-082.0054 ................................. 6 18-082.0055 ................................. 6 18-137.035 ................................... 5 18-138.035 ................................... 5 18-147.035 ................................... 5 18-148.035 ................................... 5 18-157.035 ................................... 5 18-158.035 ................................... 5 18-167.035 ................................... 6 18-168.035 ................................... 6 18-187.035 ................................... 6 18-188.035 ................................... 6 18-237.035 ................................... 5 18-238.035 ................................... 5 18-247.035 ................................... 5 18-248.035 ................................... 5 18-257.035 ................................... 5 18-258.035 ................................... 5 18-267.035 ................................... 6 18-268.035 ................................... 6 Typ-Nr. Page Typ-Nr. Page 18-287.035 ................................... 6 18-288.035 ................................... 6 18-910 .......................................... 8 18-920.1 ....................................... 8 18-920.2 ....................................... 8 18-920.3 ....................................... 8 18-931.2 ....................................... 7 18-931.4 ....................................... 7 18-931.5 ....................................... 7 18-932.0 ....................................... 7 18-932.2 ....................................... 7 18-932.4 ....................................... 7 18-932.5 ....................................... 7 18-932.8 ....................................... 7 18-932.9 ....................................... 7 18-941.2 ....................................... 7 18-941.4 ....................................... 7 18-941.5 ....................................... 7 18-942.0 ....................................... 7 18-942.2 ....................................... 7 18-942.4 ....................................... 7 18-942.5 ....................................... 7 18-942.8 ....................................... 7 18-942.9 ....................................... 7 18-945 .......................................... 8 18-946 .......................................... 8 18-951.2 ....................................... 7 18-951.4 ....................................... 7 18-951.5 ....................................... 7 18-952.0 ....................................... 7 18-952.2 ....................................... 7 18-952.4 ....................................... 7 18-952.5 ....................................... 7 18-952.8 ....................................... 7 18-952.9 ....................................... 7 18-961.2 ....................................... 7 18-961.4 ....................................... 7 18-961.5 ....................................... 7 18-962.0 ....................................... 7 18-962.2 ....................................... 7 18-962.4 ....................................... 7 18-962.5 ....................................... 7 18-962.8 ....................................... 7 18-962.9 ....................................... 7 18-981.2 ....................................... 7 18-981.4 ....................................... 7 18-981.5 ....................................... 7 18-982.0 ....................................... 7 18-982.2 ....................................... 7 18-982.4 ....................................... 7 18-982.5 ....................................... 7 18-982.8 ....................................... 7 18-982.9 ....................................... 7 19-905 .......................................... 9 19-948.0 ....................................... 8 19-949.0 ....................................... 8 15 10.2008 Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com