Signal Relays AXICOM Card SN Relay V23030 n n Low profile, therefore particularly suited for flat pack components grouping For relays with 1 or 2 form C (CO) contacts: - creepage and clearance distances between contacts and frame >5mm or >10mm (depending on the relay version) - dielectric strength between contacts and frame 4kVrms or 6kVrms Typical applications measuring and control systems, alarm and security equipment, road traffic and railway signaling systems Contact Data A104 A106 A204 A206 Contact arrangement 4 form C, 6 form C, 4 form C, 6 form C, (4 CO) (6 CO) (4 CO) (6 CO) Max. switching voltage 250VDC 250VDC 30VDC 30VDC 250VAC 250VAC 36VAC 36VAC Limiting continuous current 50C ambient 2A 2A 2A 2A 75C ambient 1A 1A 1A 1A Limiting making/breaking current 3A1) 3A1) 0.2A 0.2A Contact material Ag, Ag, Gold F2) Gold F2) Au-flashed Au-flashed Contact style bifurcated contacts Frequency of operation, without load max. 30 operations/s Operate / release time approx. 8/2ms Max. DC breaking capacity (contacts Ag, gold flashed) Curve 1: arc extinguished within contact transit period (limit curve I) Curve 2: safe breaking, erc extinguished (limit curve II) Contact Data (continued) Mechanical endurance aaprox. 108 operations 1) The current of 3 A for max 4s at 10% on-time. 2) Gold F on request only 3) Self inductance in accordance with IEC 255-0-20 Coil Data Magnetic system Coil voltage range Max. coil temperature Thermal resistance neutral, monostable 5 to 60VDC 110C 35K/W Coil versions, monostable Coil Rated Operate Limiting Coil Rated coil code voltage voltage Voltage resistance power 4/6 pole VDC VDC VDC 10%4) mW 032 5 3.3/4.0 10.8 38 658 012 6 3.9/4.6 12.4 50 720 017 12 7.8/9.5 24.0 185 778 021 24 15.5/18.5 47.0 730 789 026 48 32/37 88.0 27004) 853 014 60 38/45 109.0 41004) 878 4) Coil resistance 15% All figures are given for coil without pre-energization, at ambient temperature +23C The operating voltage limits UI and UII depend on temperature according to the following formula: UI tamb = kI*UI 20C, UII tu = kII*UII 20C; tamb = ambient temperature, UI tamb = minimum voltage at ambient temperature, UII tamb = maximum voltage at ambient temperature, kI and kII are factors. tamb 20C 30C 40C 50C 60C 70C kI 1 1.04 1.085 1.13 1.17 1.21 kII 1 0.93 0.86 0.79 0.7 0.6 Insulation Data Electrical endurance Type Load Ag, gold-flashed 2.4A, 24VDC, resistive Ag, gold-flashed 3A, 24VDC, resistive Ag, gold-flashed 1.35A, 30VDC, resistive Ag, gold-flashed 0.85A, 40VDC, resistive Ag, gold-flashed 0.36A, 60VDC, resistive Ag, gold-flashed 0.21A, 110VDC, rersitive Ag, gold-flashed 2.4A, 24VDC, resistive+100H3) Ag, gold-flashed 0.6A, 60VDC, resistive+100H3) Ag, gold-flashed 0.24A, 110VDC, resistive+100H3) 07-2012, Rev. 0712 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Operations appr. 1x106 appr. 0.3x106 appr. 6x106 appr. 2x107 appr. 8x107 appr. 10x107 appr. 1x106 appr. 10x106 40x106 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Initial dielectric strength between coil and frame between contact and contact between contact and frame between contact and coil Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 500Vrms 1000Vrms 1000Vrms 1000Vrms Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 1 Signal Relays AXICOM Card SN Relay V23030 (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C Category of environmental protection IEC 61810 RT I - dust protected, RT III - immersion cleanable Degree of protection, IEC 60529 IP30, IP67 Terminal type PCB-THT Weight V23030-Axxx approx. 12g V23030-Cxxx approx. 30g V23030-Hxxx approx. 25g V23030-Jxxx approx. 30g Ultrasonic cleaning not recommended Packaging unit 5 pcs. PCB layout / terminal assignment Bottom view on solder pins 4 form C (4 CO) contacts V23030-Axxxx-xx04 V23030-Hxxxx-xx04 6 form C (6 CO) contacts V23030-Axxxx-xx04 V23030-Hxxxx-xx04 Hole M required only for relays with earth connection. 2 07-2012, Rev. 0712 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Hole M required only for relays with earth connection. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Signal Relays AXICOM Card SN Relay V23030 (Continued) Dimensions V23030-Axxx, 4 form C (4 CO) contacts, dust protected V23030-Hxxx, 4 form C (4 CO) contacts, immersion cleanable V23030-Cxxx, 6 form C (6 CO) contacts, dust protected V23030-Jxxx, 6 form C (6 CO) contacts, immersion cleanable 07-2012, Rev. 0712 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3 Signal Relays AXICOM Card SN Relay V23030 (Continued) Product code structure Typical product code V23030 -A 1 021 -A1 04 Type V23030 Card SN Relay Contact arrangement A 4 form C, 4 CO, dust proof C 6 form C, 6 CO, dust proof H 4 form C, 4 CO, immersion cleanable J 6 form C, 6 CO, immersion cleanable Earth connection 1 Without earth connection 2 With earth connection Coils Coil code: please refer to coil versions table Contact material A1 Silver, gold flashed A2 Gold F Contact arrangement 04 4 form C, 4 CO 06 6 form C, 6 CO Other types on request Product code Version Coil V23030-A1xxx, 4 pole, without earth connection, dust protected V23030-A1017-A104 4 pole, without earth conn. 12VDC V23030-A1021-A104 4 pole, without earth conn. 24VDC V23030-A1026-A104 4 pole, without earth conn. 48VDC V23030-A2xxx, 4 pole, with earth connection, dust protected V23030-A2012-A104 4 pole, with earth conn. 6VDC V23030-A2017-A104 4 pole, with earth conn. 12VDC V23030-A2017-A204 4 pole, with earth conn. 12VDC V23030-A2021-A104 4 pole, with earth conn. 24VDC V23030-A2026-A104 4 pole, with earth conn. 48VDC V23030-A2014-A104 4 pole, with earth conn. 60VDC V23030-C1xxx, 6 pole, without earth connection, dust protected V23030-C1017-A104 6 pole, without earth conn. 12VDC V23030-C1021-A104 6 pole, without earth conn. 24VDC V23030-C1021-A204 6 pole, without earth conn. 24VDC V23030-C1026-A104 6 pole, without earth conn. 48VDC V23030-C2xxx, 6 pole, with earth connection, dust protected V23030-C2012-A104 6 pole, with earth conn. 6VDC V23030-C2017-A104 6 pole, with earth conn. 12VDC V23030-C2017-A204 6 pole, with earth conn. 12VDC V23030-C2021-A104 6 pole, with earth conn. 24VDC V23030-C2014-A104 6 pole, with earth conn. 60VDC 4 07-2012, Rev. 0712 www.te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Arrangement Enclosure Part number 4 form C (4 CO) 4 form C (4 CO) 4 form C (4 CO) Dust protected Dust protected Dust protected 3-1393801-6 3-1393801-8 4-1393801-1 4 form C (4 CO) 4 form C (4 CO) 4 form C (4 CO) 4 form C (4 CO) 4 form C (4 CO) 4 form C (4 CO) Dust protected Dust protected Dust protected Dust protected Dust protected Dust protected 4-1393801-4 4-1393801-8 4-1393801-9 5-1393801-0 5-1393801-2 4-1393801-6 6 form C (6 CO) 6 form C (6 CO) 6 form C (6 CO) 6 form C (6 CO) Dust protected Dust protected Dust protected Dust protected 6-1393801-2 6-1393801-3 6-1393801-4 6-1393801-7 6 form C (6 CO) 6 form C (6 CO) 6 form C (6 CO) 6 form C (6 CO) 6 form C (6 CO) Dust protected Dust protected Dust protected Dust protected Dust protected 6-1393801-9 7-1393801-1 7-1393801-2 7-1393801-3 7-1393801-0 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change.