Advanced Power Solutions 4/5/01 AC TO DC EXTERNAL WALLMOUNT ADAPTOR 2-BLADE USA OR EURO-STECKER AC PLUG SINGLE OUTPUT 9-10 WATTS SWITCHING POWER SUPPLIES APS09ES SERIES FEATURES: ! VERY SMALL & COMPACT IN SIZE ! 2-BLADE USA OR EURO-STECKER AC PLUG ! EMI MEET EN55022 / FCC CLASS B ! MEETS UNIVERSAL SAFETY STANDARDS ! CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: 90-132Vac or 90-264Vac Input Connector: 2-blade USA WM1 or Euro-Stecker WM3 AC plug Input Frequency: 47-63Hz Inrush Current: Typical 34A @230Vac 21A @ 230 Vac by adding the thermister Input Current: 0.22A@115Vac. / 0.1A @ 230Vac Dielectric Withstand: Meets IEC950 EMI: Meet EN55022 / FCC Class B Hold-up Time: 10mS @115Vac or 40mS @ 230Vac typical Output Voltage: See Ratings Chart Output Current: See Ratings Chart Output Wattage: 9 ~ 10 Watts typical Output Connector: Optional Line Regulation: 0.1% typical Load Regulation: 1.5 ~3.0% typical Noise & Ripple: Typ.1.0% peak to peak OVP: Built-in, Zener Diode clamping Overload Protection: Typ. 125 ~ 150% of max. power Over-range or short circuit, power foldback & self-recovering GENERAL SPECIFICATION Efficiency: 75% typical Switching Frequency: Fixed 100KHz Circuit Topology: Fixed Frequency flyback circuit Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: UL1950 / EN60950 Class II Power Density: 1.73 Watts. / Inch3 Operating Temperature: 0 to +40C Storage Temperature: -20C to +85C Temperature Coefficient: 0.04% perC Cooling: Free air convection Construction: Impact resistant thermo-plastic enclosure case Wallmount Format Notes: (1) All measurements are at nominal input, full load, and +25C unless otherwise specified. (2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to full load (%). (3) The exact obtainable load regulation depends upon the output cord selected and load current. Upper data are for 6 ft. (2 m) cord AWG#18 wires. For the details of safety approval, please consult the factory. MODEL NO. DESCRIPTION: APS09ES - X X X Y Y Y - S (1) (1) IF INPUT VOLTAGE 90-132Vac INPUT AC PLUG : [1]WM1,[3]WM3. OUTPUT CURRENT OUTPUT VOLTAGE SERIES NAME (External Switcher): About 9W OUTPUT VOLTAGE / CURRENT RATINGS CHART DEFINED OUTPUT VOLTAGE (Vdc) OUTPUT VOLTAGE (Vdc)/CURRENT (A) 5.0Vdc < Any Voltage > 15.0Vdc 5.0-5.6V/1.8-1.6A, 5.7-6.0V/1.58-1.5A, 6.1-6.4V/1.47-1.4A, 6.5-6.9V/1.38-1.3A, 7.0-7.5V/1.28-1.2A, 7.6-8.2V/1.18-1.1A, 8.3-9.0V/1.08-1.0A, 9.1-10.0V/0.99-0.9A, 10.1-11.2V/0.89-0.8A, 11.3-12.8V/0.79-0.7A, 12.9-13.8V/0.69-0.65A, 13.9-15.0V/0.64-0.6A. Note: Refer to the upper Chart or consult factory for the exact Model No. and V/A ratings. SINGLE OUTPUT (Model No. for example.) MODEL NO. AC INPUT 90-132Vac APS09ES-050160-1(1) 90-264Vac APS09ES-050180-1 90-132Vac APS09ES-050180-1(1) 90-264Vac APS09ES-050180-3 90-264Vac APS09ES-050200-1 90-264Vac APS09ES-050200-3 90-264Vac APS09ES-120075-1 90-132Vac APS09ES-120075-1(1) 90-264Vac APS09ES-120075-3 90-264Vac APS09ES-150060-1 90-132Vac APS09ES-150060-1(1) 90-264Vac APS09ES-150060-3 AC PLUG WM1 WM1 WM1 WM3 WM1 WM3 WM1 WM1 WM3 WM1 WM1 WM3 MECHANICAL DIMENSIONS: MM [INCHES] O/P VOLTAGE 5.0V 5.0V 5.0V 5.0V 5.0V 5.0V 12.0V 12.0V 12.0V 15.0V 15.0V 15.0V O/P CURRENT 1.60A 1.80A 1.80A 1.80A 2.00A 2.00A 0.75A 0.75A 0.75A 0.60A 0.60A 0.60A WEIGHT: 113g (4.0 Oz)