PRODUCT DESCRIPTION
CircuitWorks Lead-Free Flux Remover Pen
is designed specifically to remove flux used
in Lead-Free applications. The Lead-Free
Flux Remover Pen quickly cleans type R,
RMA, and RA rosin flux residues as well as
No Clean Fluxes containing both organic and
synthetic no clean fluxes.
Removes rosin and no clean flux residues
Can be used after soldering with lead-free
or Tin/Lead solders
Penetrates hard to reach areas
Pen dispenser provides controlled and
exact application of cleaning solvent
Removes ionic and non-ionic residues
Excellent material compatibility
Fast drying
RoHS compliant
TYPICAL APPLICATIONS
CircuitWorks Lead-Free Flux Re mover Pen
removes flux residues on:
Printed Circuit Boards
Chip Carriers
Heat Sinks
Surface Mount Device Pads
Switches
Sockets
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Lead-Free Flux Remover Pen - CW9400
Flash Point (TCC) 102 °F (39 °C)
Vapor Density (air=1) > 1
Surface Tension 17.7 dyne/cm
Appearance Clear Liquid
Odor Mild
Shelf life 5 years
RoHS Comp liant
CHEMTRONICS
Technical Data Sheet
CircuitWorks
Lead-Free Flux Remover Pen
TDS # CW9400
COMPATIBILITY
CircuitWorks Lead-Free Flux Remover Pen
is generally compatible with most materials
used in the electronics industry. As with any
cleaning agent, material compatibility should
be determined on a non-critical area prior to
use.
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully pr ior to use.
Hold pen vertically and briefly depress tip to
start liquid flow. Rub pen tip over residues
on surface to be cleaned. Wipe area clean
with a ControlWipe dry wipe to remove
loosened residues.
AVAILABILITY
CW9400 9 gm (0.32 oz)
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll f ree number is: 1-800-TECH-
401.
NOTE: This information is believed to be accurate. It is
intended for professional end users having the skills to
evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of the
data and assumes no liability in connection with damages
incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
Chemtronics and CircuitWor ks are r egistered trademarks of
Chemtronics. All rights reserved. ControlWip e is a trademark
of Chemtronics. All rights reserved.
DISTRIBUTED BY:
