4 3 2 1 NOTES 1. DIMENSIONS ARE IN MILLIMETERS. 3MTM TWIN AXIAL CABLE, SL8800 SERIES 2. PHYSICAL: COLOR: SILVER MARKING: 3M (part number) 30 AWG (signal plating) [VW1] (lot code) EXAMPLE: 3M SL8801/12-10DA5-00 30 AWG SILVER TW602-1 D 15.60 EXAMPLE VW1: 3M SL8801/12-1FDG5-00 30 AWG SILVER VW1 TW602-1 7.08 3. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION (RIA E1 & C1 APPLY) 4.95 2.58 6.52 1.00 .25 2 PLACES THIS CABLE CONSTRUCTION HAS A THIN ALUMINUM LAYER AT EACH EDGE. USER SHOULD EVALUATE ITS USE IN THEIR APPLICATION AND, IF NECESSARY, INSULATING TAPE MAY BE APPLIED TO COVER THE ALUMINUM LAYER, AS USER DEEMS APPROPRIATE. 0.038 0.79 4 PLACES SIGNAL WIRES: 30 AWG SOLID ( 0.254 [.0100]) SILVER OR TIN PLATED COPPER 0.787 [.0310] POLYOLEFIN INSULATION 8 PLACES 0.56 3 PLACES GROUND WIRES: 30 AWG SOLID ( 0.254 [.0100]) TIN PLATED COPPER 2 PLACES D 5. FOIL AND INSULATOR STRIPPING BLADE DESIGN DRAWINGS ARE AVAILABLE UPON REQUEST. TOOLING REFERENCE NUMBER: NU6D SIDEBAND WIRES: 30 AWG SOLID ( 0.254 [.0100]) TIN PLATED COPPER 0.558 [.0220] POLYOLEFIN INSULATION 4 PLACES B C DRAWING NUMBER C 78-5100-2412-4 4. THE OUTER SURFACE OF THE RIBBON CABLE HAS A METALLIC APPEARANCE, BUT IS NOT CONDUCTIVE. THERE IS A TRANSLUCENT POLYESTER OUTER LAYER OVER AN ALUMINUM SHIELDING LAYER, WHICH GIVES THIS APPEARANCE. REVISION UL FILE NUMBER: E42769 5.18 2.81 0.874 D B D 44896 DEC 18,2012 JNC ML ADD VW-1 PART NUMBERS, RE-DIM DWG & REVISE NOTE 4 C 38575 JAN 26,2012 LDS DLD REMOVED SHT 2 & 3; REVISED NOTE 7 B 34667 JUN 16,2011 MWL DD REMOVE X IN MILLIMETERS TOL BLK AND ADD TOLS A A SIGNAL WIRE PLATING SILVER TIN DESIGN REFERENCE HORIZONTAL FLAME VERSION VW1 VERSION SL8801/12-10DA5-00 SL8801/12-1FDG5-00 SL8801/12-11DA5-00 PRODUCT SPEC. IMPEDANCE SPEC. PS-0105 100 SL8801/12-1GDG5-00 NEXT ASSEMBLY DISTRIBUTION CODES DIVISION 95 DO NOT SCALE DRAWING SCALE 15 1 5 OHMS INTERPRET PER ASME Y14.5 - 1994 MAX SURFACE ROUGHNESS 125 ALL SURFACES MARKED ONLY 4 3 DRFT DATE MWL MAR 04,2011 CHKD DATE RE MAR 04,2011 C 2 St. Paul, TOLERANCES EXCEPT AS NOTED INCHES .0 .00 .000 .0000 MILLIMETERS 0 .0 .00 .10 .000 ANGLES 1 ML ISSUE DATE AND DESCRIPTION 3M Center THIRD ANGLE PROJECTION Visit http://www.3mconnectors.com ECO DIVISION CODE PS-0163 5 OHMS REV APR 11,2011 MN 55144 DRFT MFG DATE APPVL DATE ML CHKD 3M COPYRIGHT 2013 This document and the information it contains are 3M property and may not be reproduced or further distributed without 3M permission, or used or disclosed other than for 3M authorized purposes. All rights reserved. TITLE SL8801/12-1XDX5-00, 100 OHM, 30 AWG, 4PR, 4SBC CAGE SIZE NUMBER MODEL DRAWING NO. REV. 78-5100-2412-4 DET. LISTS 1 YES NO D SHT 1 OF 1 A Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3M: SL8801/12-11DA5-00 SL8801/12-10DA5-00