TO-247 LL
STTH30AC06CWL
K
A1
A2
K
K
A2
A2
A1
A1
TO-3PF
STTH30AC06CPF
A1
K
A2
TO3P-3L
STTH30AC06CP
Features
• Ultrafast switching
•Low reverse current
• Low thermal resistance
• Reduces switching and conduction losses
• Insulated package TO-3PF:
– Insulated voltage: 2500 VDC
Description
The STTH30AC06C uses ST Turbo 2 600 V technology. It is suited as boost diode
specially for use in air conditioning equipment as continuous mode interleaved power
factor correction.
Product status link
STTH30AC06C
Product summary
IF(AV) 2 x 15 A
VRRM 600 V
trr (typ) 40 ns
VF (typ) 1.15 V
Tj175 °C
Turbo 2 ultrafast high voltage rectifier
STTH30AC06C
Datasheet
DS9831 - Rev 5 - April 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
1Characteristics
Table 1. Absolute ratings (limiting values per diode at 25 °C, unless otherwise specified)
Symbol Parameter Value Unit
VRRM Repetitive peak reverse voltage 600 V
IF(RMS) Forward rms current 30 A
IF(AV) Average forward current
Per diode 15
A
Per device 30
IFSM Surge non repetitive forward current tp = 10 ms sinusoidal 140 A
Tstg Storage temperature range -65 to +175 °C
TjMaximum operating junction temperature 175 °C
Table 2. Thermal parameters
Symbol Parameter Max. value Unit
Rth(j-c) Junction to case
TO3P-3L, TO247 LL
Per diode 1.5
°C/W
Total 0.85
TO-3PF
Per diode 3.5
Total 2.7
Rth(c) Coupling
TO3P-3L, TO247 LL) 0.2
TO-3PF 1.9
Table 3. Static electrical characteristics (per diode)
Symbol Parameter Test conditions Min. Typ. Max. Unit
IR(1) Reverse leakage current
Tj = 25 °C
VR = VRRM
- 10
µA
Tj = 150 °C - 40 400
VF(2) Forward voltage drop
Tj = 25 °C
IF = 15 A
- 1.95
V
Tj = 150 °C - 1.15 1.45
Tj = 25 °C
IF = 30 A
- 2.25
Tj = 150 °C - 1.42 1.8
1. Pulse test: tp = 5 ms, δ < 2%
2. Pulse test: tp = 380 μs, δ < 2 %
To evaluate the conduction losses, use the following equation:
P = 1.1 x IF(AV) + 0.023 x IF2(RMS)
STTH30AC06C
Characteristics
DS9831 - Rev 5 page 2/15
Table 4. Dynamic characteristics (per diode)
Symbol Parameters Test conditions Min. Typ. Max. Unit
trr Reverse recovery time Tj = 25 °C
IF = 0.5 A, Irr = 0.25 A, IR = 1 A - 30
ns
IF = 1 A, dIF/dt = 50 A/μs, VR = 30 V - 40 55
IRM Reverse recovery current Tj = 125 °C IF = 15 A, dIF/dt = 100 A/μs, VR = 400 V - 4 5.5 A
tfr Forward recovery time
Tj = 25 °C IF = 15 A, dIF/dt = 100 A/μs, VFR = 1.9 V
- 100 ns
VFP Forward recovery voltage - 2.5 V
STTH30AC06C
Characteristics
DS9831 - Rev 5 page 3/15
1.1 Characteristics (curves)
Figure 1. Average forward power dissipation versus
average forward current (per diode)
0
5
10
15
20
25
30
0 2 4 6 8 10 1 2 14 16 18 20
PF(AV)(W)
δ=0.05 δ=0.1 δ=0.2 δ=0.5 δ=1.0
IF(AV)(A)
T
δ=tp/T tp
Figure 2. Forward voltage drop versus forward current
(typical values, per diode)
0.1
1.0
10.0
100.0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8
IF(A)
VF(V)
Tj = 150 °C
Tj = 25 °C
Figure 3. Forward voltage drop versus forward current
(maximum values, per diode)
0.1
1.0
10.0
100.0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2
IF(A)
VF(V)
Tj = 25 °C
Tj = 150 °C
Figure 4. Relative variation of thermal impedance,
junction to case, versus pulse duration (TO3P-3L, TO247
LL)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.E-04 1.E-03 1.E-02 1.E-01 1.E+00
TO3P-3L / TO-247 LL
t (s)
p
Z / R
th(j-c) th(j-c)
Single pulse
Figure 5. Relative variation of thermal impedance,
junction to case, versus pulse duration (TO3P-3L)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.E-03 1.E-02 1.E-01 1.E+00 1.E+01 1.E+02
-3PFTO
t (s)
p
Z / R
th(j-c) th(j-c)
Single pulse
Figure 6. Peak reverse recovery current versus dIF/dt
(typical values, per diode)
0
4
8
12
16
0 5 0 100 150 200 250 300 350 400 450 500
IRM(A)
dlF/dt(A/µs)
IF = 15 A
VR = 400 V
Tj = 125 °C
STTH30AC06C
Characteristics (curves)
DS9831 - Rev 5 page 4/15
Figure 7. Reverse recovery time versus dIF/dt (typical
values, per diode)
0
50
100
150
200
250
300
350
400
0 5 0 100 150 200 250 300 350 400 450 500
tRR(ns)
dlF/dt(A/µs)
IF = 15 A
VR = 400 V
Tj = 125 °C
Figure 8. Reverse recovery charges versus dIF/dt (typical
values, per diode)
0
100
200
300
400
500
600
700
800
0 5 0 100 150 200 250 300 350 400 450 500
QRR(nC)
dlF/dt(A/µs)
IF = 15 A
VR = 400 V
Tj = 125 °C
Figure 9. Reverse recovery softness factor versus dIF/dt
(typical values, per diode)
0.0
0.5
1.0
1.5
2.0
50 100 150 200 250 300 350 400 450 500
0
SFACTOR
dlF/dt(A/µs)
IF = 15 A
VR = 400 V
Tj = 125 °C
Figure 10. Relative variations of dynamic parameters
versus junction temperature
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
25 50 75 100 125
IRM
SFACTOR
QRR
Tj(°C)
IF = 15 A
VR = 400 V
Ref: Tj = 125 °C
Figure 11. Transient peak forward voltage versus dIF/dt
(typical values, per diode)
0
2
4
6
8
100 150 200 250 300 350 400 450 500
VFP(V)
dlF/dt(A/µs)
IF = 15 A
Tj = 125 °C
Figure 12. Forward recovery time versus dIF/dt (typical
values, per diode)
0
20
40
60
80
100
120
100 150 200 250 300 350 400 450 500
tFR(ns)
dlF/dt(A/µs)
IF = 15 A
VFR = 1.5 V
Tj = 125 °C
STTH30AC06C
Characteristics (curves)
DS9831 - Rev 5 page 5/15
Figure 13. Junction capacitance versus reverse voltage applied (typical values, per diode)
C(pF)
10
100
1000
1 1 0 100 1000
F = 1 MHz
VOSC = 30 mVRMS
Tj = 25 °C
VR(V)
STTH30AC06C
Characteristics (curves)
DS9831 - Rev 5 page 6/15
2Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
2.1 TO3P-3L package information
• Epoxy meets UL94, V0
•Cooling method: by conduction (C)
•Recommended torque: 0.8 to 1.0 N·m
Figure 14. TO3P-3L package outline
E
E1
L2
A2
D
L1
D1
b2
c
L
e
b1(2x)
)
(2x
b( )
3x
Q
A
A1
ØP
Seating plane
Q1
E2
ØP1
STTH30AC06C
Package information
DS9831 - Rev 5 page 7/15
Table 5. TO3P-3L package mechanical data
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 4.60 4.80 5 0.18 0.19 0.19
A1 1.45 1.50 1.65 0.05 0.06 0.06
A2 1.20 1.40 1.60 0.04 0.05 0.06
b 0.80 1.00 1.20 0.03 0.04 0.05
b1 1.80 2.00 2.20 0.07 0.08 0.08
b2 2.80 3.00 3.20 0.11 0.12 0.12
c 0.55 0.60 0.75 0.02 0.02 0.03
D 19.70 19.90 20.10 0.77 0.78 0.79
D1 13.70 13.90 14.10 0.54 0.54 0.55
E 15.40 15.60 15.80 0.60 0.61 0.62
E1 13.40 13.60 13.80 0.53 0.53 0.54
E2 9.40 9.60 9.90 0.37 0.38 0.39
e 5.15 5.45 5.75 0.20 0.21 0.22
L 19.80 20 20.20 0.78 0.78 0.79
L1 3.30 3.50 3.70 0.13 0.14 0.14
L2 18.20 18.40 18.60 0.71 0.72 0.73
Diam. P 3.30 3.40 3.50 0.13 0.13 0.14
Diam. P1 3.10 3.20 3.30 0.12 0.12 0.13
Q 4.80 5 5.20 0.19 0.19 0.20
Q1 3.60 3.80 4 0.14 0.15 0.16
STTH30AC06C
TO3P-3L package information
DS9831 - Rev 5 page 8/15
2.2 TO-3PF package information
• Epoxy meets UL94, V0
•Cooling method: by conduction (C)
•Recommended torque: 0.8 to 1.0 N·m
Figure 15. TO-3PF package outline
L5
N
R
L4
G
G1
F(3 )
XE
F2(3 )
X
L7
L6
D1
D
H
L2
C
A
L
L3
DIA
Projection
STTH30AC06C
TO-3PF package information
DS9831 - Rev 5 page 9/15
Table 6. TO-3PF mechanical data
Dim.
mm
Min. Typ. Max.
A 5.30 5.70
C 2.80 3.20
D 3.10 3.50
D1 1.80 2.20
E 0.80 1.10
F 0.65 0.95
F2 1.80 2.20
G 10.30 11.50
G1 5.45
H 15.30 15.70
L 9.80 10 10.20
L2 22.80 23.20
L3 26.30 26.70
L4 43.20 44.40
L5 4.30 4.70
L6 24.30 24.70
L7 14.60 15
N 1.80 2.20
R 3.80 4.20
Dia 3.40 3.80
STTH30AC06C
TO-3PF package information
DS9831 - Rev 5 page 10/15
2.3 TO-247 long leads package information
• Epoxy meets UL94, V0
•Cooling method: by conduction (C)
•Maximum torque value: 1.0 N·m
Figure 16. TO-247 long leads package outline
3
V3
A
D
DIA
M
E
F
G
V
V1
L4
L5
H
21
Heat-sink plane
Projection
F1
L1
L
L3
L2
F2
321
Back view
STTH30AC06C
TO-247 long leads package information
DS9831 - Rev 5 page 11/15
Table 7. TO-247 long leads package mechanical data
Dim.
mm. Inches
Min. Typ. Max. Min. Typ. Max.
A 4.90 5.15 0.192 0.202
D 1.85 2.10 0.072 0.082
E 0.55 0.67 0.021 0.026
F 1.07 1.32 0.042 0.051
F1 1.90 2.38 0.074 0.093
F2 2.87 3.38 0.110 0.133
G 10.90 BSC 0.429 BSC
H 15.77 16.02 0.620 0.630
L 20.82 21.07 0.810 0.820
L1 4.16 4.47 0.163 0.175
L2 5.49 5.74 0.216 0.225
L3 20.05 20.30 0.789 0.799
L4 3.68 3.93 0.144 0.154
L5 6.04 6.29 0.237 0.247
M 2.25 2.55 0.088 0.100
V 10° 10°
V1 3° 3°
V3 20° 20°
DIA 3.55 3.66 0.139 0.143
STTH30AC06C
TO-247 long leads package information
DS9831 - Rev 5 page 12/15
3STTH30AC06C Ordering information
Table 8. Ordering information
Order code Marking Package Weight Base qty. Delivery mode
STTH30AC06CP STTH30AC06C TO3P-3L 5.26 g 30
TubeSTTH30AC06CPF TH30AC06C TO-3PF 5.6 g 30
STTH30AC06CWL STTH30AC06CWL TO-247 LL 4.36 g 30
STTH30AC06C
STTH30AC06C Ordering information
DS9831 - Rev 5 page 13/15
Revision history
Table 9. Document revision history
Date Version Changes
13-Nov-2013 1 Initial release.
25-Jun-2015 2 Update of cover page and Table 7. Format updated to current standard.
01-Jul-2015 3 Updated Features.
05-Sep-2016 4 Updated Figure 16.
18-Apr-2018 5 Updated TO247LL POA drawing.
STTH30AC06C
DS9831 - Rev 5 page 14/15
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
STTH30AC06C
DS9831 - Rev 5 page 15/15
