Document Number: 28744 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 11-Mar-08 243
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag
Flat Chip Resistors with Established Reliability
MCS 0402 VG01, MCT 0603 VG01 and MCU 0805 VG01
thin film flat chip resistors with established reliability are the
perfect choice for all high-reliability applications typically
found in the fields of military, aircraft and spacecraft
electronics. These versions supplement the families of
professional and precision thin film flat chip resistors MCS
0204, MCT 0603 and MCU 0805.
FEATURES
•
Approved according to EN 140401-801, version E
•Established reliability, failure rate level E6
•Advanced thin film technology
•Advanced dissipation rating: 100 mW
•Excellent overall stability: Class 0.5
•Green product, supports lead (Pb)-free soldering
APPLICATIONS
•Military
•Avionics
•Space
Notes
• The failure rate level E6 corresponds to MIL Level P
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
METRIC SIZE
INCH: 0402 0603 0805
METRIC: RR 1005M RR 1608M RR 2012M
e3
RoHS
COMPLIANT
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 MCT 0603 MCU 0805
CECC size, style RR 1005M RR 1608M RR 2012M
Resistance range 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto1MΩ
Resistance tolerance ± 1 %; ± 0.1 %
Temperature coefficient ± 50 ppm/K; ± 15 ppm/K
Climatic category (LCT/UCT/days) 55/125/56 55/125/56 55/125/56
Rated dissipation, P70 0.063 W 0.1 W 0.125 W
Operating voltage, Umax. AC/DC 50 V 75 V 150 V
Film temperature 125 °C 125 °C 125 °C
Max. resistance change at P70
for resistance range, ΔR/R after: 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto1MΩ
1000 h ≤ 0.25 %
8000 h ≤ 0.5 %
225 000 h ≤ 1.5 %
Permissible voltage against
ambient (insulation):
1 min; Uins 75 V 100 V 200 V
continuous 75 V 75 V 75 V
Assessed failure rate level E6
FITobserved ≤ 0.1 x 10- 9/h ≤ 0.1 x 10- 9/h ≤ 0.1 x 10- 9/h
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag Flat Chip Resistors with Established Reliability
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28744
244 Revision: 11-Mar-08
Notes
(1) Products can be ordered using the PART NUMBER, PRODUCT DESCRIPTION or EN ordering information
(2) Please refer to table PACKAGING, see next page
(3) Reference to EN140401-801 Version E
PART NUMBER AND PRODUCT DESCRIPTION (1)
PART NUMBER: MCT0603HC2871FP500
PART NUMBER: MCT0603HZ0000ZP500
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PA CK A G I N G (2) SPECIAL
MCS0402
MCT0603
MCU0805
H = VG01 CECC E6 E = ± 15 ppm/K
C = ± 50 ppm/K
Z = Jumper
3 digit value
1 digit
multiplier
MULTIPLIER
8 = *10- 2
9 = *10- 1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
B = ± 0.1 %
F = ± 1 %
Z = Jumper
P1
P5
E1
E0
PW
Up to 2 digits
00 = Standard
PRODUCT DESCRIPTION: MCT 0603-50 1 % VG01 P5 287K
PRODUCT DESCRIPTION: MCT 0603 VG01 P5 0R0
MCT 0603 - 50 1 % VG01 P5 287K
MCT 0603 - - VG01 P5 0R0
MODEL SIZE TCR TOLERANCE ESTABLISHED
RELIABILITY PACKAGING (2) RESISTANCE VALUE
MCS
MCT
MCU
0402
0603
0805
± 15 ppm/K
± 50 ppm/K
± 0.1 %
± 1 %
VG01 = CECC E6 (3) P1
P5
E1
E0
PW
562R = 562 Ω
287K = 287 kΩ
1M0 = 1 MΩ
0R0 = Jumper
EN 140401-801 ORDERING INFORMATION
Example of the ordering information for a resistor: MCT 0603-50 1 % VG01 287K
CECC40401-801EZRR1608MC287KFE6
Example of the ordering information for jumpers: MCT 0603 VG01 0R0
CECC40401-801EZRR1608M-0R00-E6
The elements used in this ordering information have the following meaning:
CECC40401-801
EZ
RR1608M
C
287K
F
E6
CECC Detail specification number
Assessment level
Style (see table Technical Specification)
Temperature coefficient (C = ± 50 ppm/K; E = ± 15 ppm/K)
Resistance value according to EN 60062, 4 characters
Tolerance on rated resistance (B = ± 0.1 %; F = ± 1 %)
Failure rate level according to EN 60115-1, table ZB.1
M C T 0 6 0 3 H Z 0 0 0 0 Z P 5 0 0
M C T 0 6 0 3 H C 2 8 7 1 F P 5 0 0
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Flat Chip Resistors with Established Reliability Vishay Beyschlag
Document Number: 28744 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 11-Mar-08 245
DIMENSIONS
PACKAGING
MODEL
REEL
DIAMETER PIECES/
PAPER TAPE ON REEL CODE
MCS 0402 VG01
180 mm/7" 1000 E1
180 mm/7" 10 000 E0
MCT 0603 VG01
180 mm/7" 1000 P1
180 mm/7" 5000 P5
330 mm/13" 20 000 PW
MCU 0805 VG01
180 mm/7" 1000 P1
180 mm/7" 5000 P5
330 mm/13" 20 000 PW
DIMENSIONS - chip resistor types, mass and relevant physical dimensions
TYPE H
(mm)
L
(mm)
W
(mm)
WT
(mm)
T1
(mm)
T2
(mm)
MASS
(mg)
MCS 0402 0.32 ± 0.05 1.0 ± 0.05 0.5 ± 0.05 > 75 % of W 0.2 + 0.1/- 0.15 0.2 ± 0.1 0.6
MCT 0603
0.45 + 0.1/- 0.05
1.55 ± 0.05 0.85 ± 0.1 > 75 % of W
0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2
1.9
MCU 0805
0.45 + 0.1/- 0.05
2.0 ± 0.1 1.25 ± 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6
T
2
T
1
L
H
WW
T
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Vishay Beyschlag Flat Chip Resistors with Established Reliability
www.vishay.com For technical questions, contact: filmresistors.thinfilmchip@vishay.com Document Number: 28744
246 Revision: 11-Mar-08
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
(96 % Al2O3) ceramic substrate and conditioned to achieve
the desired temperature coefficient. Specially designed inner
contacts are deposited on both sides. A special laser is used
to achieve the target value by smoothly cutting a meander
groove in the resistive layer without damaging the ceramics.
For the high ohmic range, optimized Cermet products
provide comparable properties. The resistor elements are
covered by a protective coating designed for electrical,
mechanical and climatic protection. The terminations receive
a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive testing procedure and optical inspection
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with EN 60286-3.
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1*. The encapsulation is resistant to all cleaning
solvents commonly used in the electronics industry,
including alcohols, esters and aqueous solutions. The
suitability of conformal coatings, if applied, shall be qualified
by appropriate means to ensure the long-term stability of the
whole system. The resistors are RoHS compliant; the pure
tin plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes. Solderability is
specified for 2 years after production or requalification. The
permitted storage time is 20 years. The immunity of the
plating against tin whisker growth has been proven under
extensive testing.
All products comply with the GADSL (1) and the
CEFIC-EECA-EICTA (2) list of legal restrictions on
hazardous substances. This includes full compliance with
the following directives:
•2000/53/EC End of Vehicle life Directive (ELV) and Annex
II (ELV II)
•2002/95/EC Restriction of the use of Hazardous
Substances directive (RoHS)
•2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
APPROVALS
The resistors are tested in accordance with EN 140401-801
(superseding CECC 40401-801) which refers to EN 60115-1
and EN 140400. Approval of conformity is indicated by the
CECC logo on the package label.
Vishay BEYSCHLAG has achieved “Approval of
Manufacturer” in accordance with EN 100114-1. The
release certificate for “Technology Approval Schedule” in
accordance with CECC 240 001 based on EN 100114-6 is
granted for the Vishay BEYSCHLAG manufacturing process.
SPECIALS
This product family of thin film flat chip resistors with
established reliability is complemented by Zero Ohm
Jumpers.
FUNCTIONAL PERFORMANCE
Further information on the performance of these products
may be found in the following Data Sheets:
•“Professional Chip resistors”
Document No. 28705
•“Precision Chip resistors”
Document No. 28700
Notes
(1) Global Automotive Declarable Substance List, see www.gadsl.org
(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see www.eicta.org → issue →
environment policy → chemicals → chemicals for electronics
MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01
Flat Chip Resistors with Established Reliability Vishay Beyschlag
Document Number: 28744 For technical questions, contact: filmresistors.thinfilmchip@vishay.com www.vishay.com
Revision: 11-Mar-08 247
Note
•Resistance values to be selected for ± 1 % tolerance from E96 only and for ± 0.1 % tolerance from E192 only
12NC INFORMATION FOR HISTORICAL
CODING REFERENCE ONLY
Part Number
•The resistors have a 12-digit ordering code starting with
2312.
•The subsequent 4 digits indicate the resistor type,
specification and packaging; see the Part Number table.
•The remaining 4 digits indicate the resistance value:
– The first 3 digits indicate the resistance value.
–The last digit indicates the resistance decade in
accordance with the Resistance Decade table.
Resistance Decade
Ordering example
The Part Number of a MCT 0603 VG01 resistor, value 287K
and TCR 50 with ± 1 % tolerance, supplied in cardboard tape
of 5000 units per reel is: 2312 215 02874.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION RESISTANCE VALUE
TCR TOLERANCE MCS 0402 MCT 0603 MCU 0805
± 50 ppm/K ± 1 % 100 Ωto 100 kΩ10 Ωto 1 MΩ1Ωto 1 MΩ
± 15 ppm/K ± 0.1 % 100 Ωto 33.2 kΩ100 Ωto 47.5 kΩ100 Ωto 100 kΩ
Jumper - ≤ 20 mΩ; Imax. = 0.63 A ≤ 20 mΩ; Imax. = 1 A ≤ 20 mΩ; Imax. = 1.5 A
RESISTANCE DECADE LAST DIGIT
1Ω to 9.99 Ω8
10 Ω to 99.9 Ω9
100 Ω to 999 Ω1
1 kΩto 9.99 kΩ2
10 kΩ to 99.9 kΩ3
100 kΩ to 999 kΩ4
1MΩ5
PART NUMBER - RESISTOR TYPE AND PACKAGING
DESCRIPTION
ORDERING CODE 2312 ... .....
CARDBOARD TAPE ON REEL
TYPE TCR TOL. E1
1000 UNITS
E0
10 000 UNITS
MCS 0402
± 50 ppm/K ± 1 % 260 0.... 275 0....
± 15 ppm/K ± 0.1 % 262 0.... 277 0....
Jumper - 262 90001 277 90001
TYPE TCR TOL. P1
1000 UNITS
P5
5000 UNITS
PW
20 000 UNITS
MCT 0603
± 50 ppm/K ± 1 % 200 0.... 215 0.... 205 0....
± 15 ppm/K ± 0.1 % 202 0.... 217 0.... -
Jumper - 202 90001 217 90001 207 90001
MCU 0805
± 50 ppm/K ± 1 % 240 0.... 255 0.... 245 0....
± 15 ppm/K ± 0.1 % 242 0.... 257 0.... -
Jumper - 242 90001 257 90001 247 90001
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
