CSC Vishay Dale Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics FEATURES * Body height: "A" profile = 0.195" [4.95 mm]; "B" profile = 0.295" [7.50 mm] * "A" profile standard in 4 thru 12 pins * Thick film resistive elements * Reduces total assembly costs * Resistor elements protected by tough epoxy conformal coating * Wide resistance range (10 to 2.2 M) * Available in bulk pack (preferred) or tube pack STANDARD ELECTRICAL SPECIFICATIONS TCR TEMPERATURE STANDARD RESISTOR RESISTANCE GLOBAL TRACKING* COEFFICIENT PACKAGE TOLERANCE POWER RATING RANGE MODEL/ (- 55 C to + 125 C) (- 55 C to + 125 C) HEIGHT % Max. AT 70 C* SCHEMATIC ppm/C ppm/C 250 A 0.20 W 10 - 50 2 (1 %)** 50 CSCxxx01 100 50.1 - 2.2M B 0.25 W 250 A 0.30 W 10 50 2 (1 %)** 50 CSCxxx03 100 50.1 - 2.2M B 0.40 W 250 A 0.20 W 10 - 50 2 (1 %)** 150 CSCxxx05 100 50.1 - 2.2M B 0.25 W * For resistor power ratings at + 25 C see derating curves. * See derating curves for Package Power Rating. ** Contact factory for 1 % OPERATING VOLTAGE VDC Max. 100 100 100 TECHNICAL SPECIFICATIONS PARAMETER Voltage Coefficient of Resistance Dielectric Strength Isolation Resistance (03 Schematic) Operating Temperature Range UNIT Veff VAC C CSC SERIES < 50 ppm typical 200 > 100M - 55 to + 125 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGDA (preferred part numbering format) C GLOBAL MODEL CSC S PIN COUNT C 0 PACKAGE HEIGHT A = "A" Profile B = "B" Profile 8 A 0 3 1 0 0 R G RESISTANCE TOLERANCE VALUE CODE 04 = 4 Pin 01 = Bussed R = Decimal F=1% 03 = Isolated K = Thousand 08 = 8 Pin G=2% 12 = 12 Pin 00 = Special J=5% M = Million 10R0 = 10 S = Special 680K = 680 k 1M00 = 1.0 M Historical Part Number example: CSC08A03101G (will continue to be accepted) D SCHEMATIC A PACKAGING SPECIAL PA = Tin/Lead, Bulk DA = Tin/Lead, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable CSC 08 A 03 101 G D03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: CSC08A05131AGPA (preferred part numbering format) C GLOBAL MODEL CSC S PIN COUNT C 0 PACKAGE HEIGHT A = "A" Profile B = "B" Profile 8 A 0 5 1 3 1 A G RESISTANCE TOLERANCE VALUE CODE 04 = 4 Pin 05 = Dual 3 digit F=1% 08 = 8 Pin Terminator Impedence code, G=2% 12 = 12 Pin followed by J=5% Alpha modifier (see Impedence codes table) Historical Part Number example: CSC08A05221331G (will continue to be accepted) P A PACKAGING SPECIAL PA = Tin/Lead, Bulk DA = Tin/Lead, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable SCHEMATIC CSC 08 A 05 221 331 G P03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING www.vishay.com 1 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 25-Aug-06 CSC Vishay Dale Thick Film Resistor Networks, Single-In-Line, Coated SIP DIMENSIONS in inches [millimeters] A Max. 0.098 [2.49] Max. C Max. Pin #1 0.130 0.010 [3.30 0.254] 0.032 [0.813] 0.050 [1.27] Max. 0.018 0.003 [0.457 0.076] 0.100 0.010 [2.54 0.254] Non-Accumulative 01 SCHEMATIC 1 3 n-1 n 03 SCHEMATIC 1 2 4 n-1 n 1 2 0.390 [9.90] 0.300 [7.62] 4 0.490 [12.45] 0.400 [10.16] CSC06 5 0.590 [14.99] 0.500 [12.70] CSC07 6 0.690 [17.53] 0.600 [15.24] CSC08 7 0.790 [20.07] 0.700 [17.78] CSC09 8 0.890 [22.61] 0.800 [20.32] CSC10 9 0.990 [25.15] 0.900 [22.86] CSC11 10 1.09 [27.69] 1.00 [25.40] CSC12 11 1.19 [30.23] 1.100 [27.94] NUMBER OF RESISTORS A (Maximum) B CSC04 2 0.390 [9.90] 0.300 [7.62] CSC06 3 0.590 [14.99] 0.500 [12.70] CSC08 4 0.790 [20.07] 0.700 [17.78] CSC10 5 0.990 [25.15] 0.900 [22.86] 6 1.19 [30.23] 1.100 [27.94] NUMBER OF RESISTORS A (Maximum) B CSC04 4 0.390 [9.90] 0.300 [7.62] R2 CSC05 6 0.490 [12.45] 0.400 [10.16] CSC06 8 0.590 [14.99] 0.500 [12.70] R1 CSC07 10 0.690 [17.53] 0.600 [15.24] CSC08 12 0.790 [20.07] 0.700 [17.78] n-1 n CSC09 14 0.890 [22.61] 0.800 [20.32] CSC10 16 0.990 [25.15] 0.900 [22.86] CSC11 18 1.09 [27.69] 1.00 [25.40] CSC12 20 1.19 [30.23] 1.100 [27.94] MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215 Solderability: Per MIL-STD-202, Method 208E, RMA flux Body: High alumina, epoxy coated Terminals: Solder plated leads Document Number: 31509 Revision: 25-Aug-06 B 3 GLOBAL MODEL 3 A (Maximum) CSC05 CSC12 05 SCHEMATIC NUMBER OF RESISTORS CSC04 GLOBAL MODEL 3 0.012 0.003 [0.305 0.076] (Leads are Along Centerline of Body) B GLOBAL MODEL 2 0.045 [1.14] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] C (Maximum) "A" Profile = 0.195 [4.95] "B" Profile = 0.295 [7.50] STOCKED RESISTANCE VALUES IN OHMS ("G" TOLERANCE) Standard E-24 resistance values stocked. Consult factory. Many dual terminator resistance values stocked. Consult factory For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 2 CSC Vishay Dale Thick Film Resistor Networks, Single-In-Line, Coated SIP IMPEDANCE CODES R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B CODE 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K "A" PROFILE + 70 C PACKAGE RATINGS Power Rating (Watts) "A" Profile CSC12A 1.5 watts CSC11A 1.37 watts CSC10A 1.25 watts CSC09A 1.12 watts CSC06A Package CSC08A 1.00 watts Single Resistor CSC07A 0.87 watts CSC06A 0.75 watts + 125 + 150 CSC05A 0.62 watts Ambient Temperature C CSC04A 0.40 watts CSC10A Package 1.90 CSC08A Package 1.50 1.15 03 Schematic 0.45 0.30 10 and 05 Schematics - 50 Derating + 25 + 70 "B" PROFILE + 70 C PACKAGE RATINGS Power Rating (Watts) "B" Profile CSC12B 1.90 watts CSC11B 1.75 watts CSC10B 1.60 watts CSC09B 1.45 watts CSC08B 1.30 watts CSC07B 1.15 watts CSC06B 1.00 watts CSC05B 0.80 watts CSC04B 0.60 watts CSC10B Package 2.50 CSC08B Package 2.00 CSC06B Package 1.50 Single Resistor 03 Schematic 0.60 01 and 05 Schematics 0.38 - 50 Derating www.vishay.com 3 + 25 + 70 + 125 + 150 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 25-Aug-06 CSC Vishay Dale Thick Film Resistor Networks, Single-In-Line, Coated SIP CIRCUIT APPLICATIONS 01 Schematic Bussed The CSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: * "Wired OR" Pull-up * Power Gate Pull-up * MOS/ROM Pull-up/Pull-down 1 2 3 n-1 n * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up * "A" profile standard, "B" Profile available. 03 Schematic Isolated The CSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: 1 2 3 4 n-1 * "Wired OR" Pull-up * Power Driven Pull-up * Power Gate Pull-up * Line Termination n * Long-Line Impedance Balancing * LED Current Limiting * ECL Output Pull-down * TTL Input Pull-down * "A" Profile standard, "B" Profile available. 05 Schematic Dual Terminator R2 The CSCxxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 * "A" profile standard, "B" Profile available. 1 2 3 n-1 n PERFORMANCE MAX. R (Typical Test Lots) TEST CONDITIONS Thermal Shock 5 cycles between - 65 C and + 125 C 0.50 % R Short Time Overload 2.5 x rated working voltage, 5 seconds 0.25 % R Low Temperature Operation 45 minutes at full rated working voltage at - 65 C 0.25 % R Moisture Resistance 240 hours with humidity ranging from 80 % RH to 98 % RH 1.00 % R Resistance to Soldering Hea Leads immersed in + 350 C solder to within 1/16" of body for 3 seconds 0.25 % R Shock Total of 18 shocks at 100 G's 0.25 % R Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz 0.25 % R Load Life 1000 hours at + 70 C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period. Derated according to the curve. 1.00 % R Terminal Strength 4.5 pound pull for 30 seconds 0.25 % R Insulation Resistance 10 000 Megohm (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) - Document Number: 31509 Revision: 25-Aug-06 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1