ATP Series Connectors Amphenol Sine Systems ATP SeriesTM Connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural, Automotive, Alternative Energy fields, as well as other demanding interconnect applications. Available in 2 and 4 pin options, our ATP SeriesTM Connectors contain superior environmental seals, seal retention capabilities and are designed for use with 10-14 AWG with size 12 contacts handling up to 25 amps. In addition, all of our AT SeriesTM connectors have been developed to be completely compatible with all other existing standard products industry-wide. ATP SERIESTM PART COMPATIBILITY ATP SERIESTM SPECIFICATIONS Amphenol Sine Systems P/N Deutsch P/N Part Description Durability No electrical/mechanical defects after 100 cycles of mating/unmating. ATP06-2S DTP06-2S Plug, 2-Way ATP06-2S-BLK DTP06-2S-E004 Plug, 2-Way, Black Corrosion Resistance No evidence of corrosion after 48 hours of salt spray per MIL-STD1344, method 1001. ATP06-2S-EC01 DTP06-2S-E003 Plug, 2-Way, w/ End Cap ATP04-4P-EC01 DTP04-4P-E003 Plug, 4-Way, W End Cap ATP04-4P-RD01 DTP04-4P-C015 Plug, 4-Way, w/ Reduced Seal Contact Current Rating #12 size contacts rated at 25 amps continuous at +125C. Current is fully rated without derating curve. AWP-2S WP-2S Wedgelock, Plug AWP-4S WP-4S Wedgelock, Plug 1062-12-0144 Socket Contact, #12 S&F Gold Plate (Reel) Operating Temperature -55C to +125C AT62-12-0144 AT62-12-0166 1062-12-0166 Socket Contact, #12 S&F Nickel (Reel) Submersion AT62-203-12141 0462-203-12141 Socket Contact, #12 Nickel AT62-210-1231 0462-210-1231 Socket Contact, #12 Gold Plate A mated connection, properly wired, placed in an oven at +125C for 1 hour, then placed immediately in a depth of water 1 meter deep for 4 hours without loss of electronic performance. ATP04-2P DTP04-2P Recpt, 2-Way ATP04-2P-BLK DTP04-2P-E004 Recpt, 2-Way, Black ATP04-2P-EC01 DTP04-2P-E003 Recpt, 2-Way, w/ End Cap Vibration ATP04-4P DTP04-4P Recept,4-Way ATP04-4P-BLK DTP04-4P-E004 Recept,4-Way, Black Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g's at Sine sweep of 10-2000Hz) ATP06-4S DTP06-4S Recept,4-Way ATP06-4S-BLK DTP06-4S-E004 Recept,4-Way, Black ATP06-4S-EC01 DTP06-4S-E003 Recept,4-Way, w/ End Cap ATP06-4S-RD01 DTP06-4S-C015 Recept,4-Way, w/ Reduced Seal ATP06-4S-RD01BK DTP06-4S-CE02 Recept,4-Way, w/ Reduced Seal Black AWP-2P WP-2P Wedgelock, Receptacle AWP-4P WP-4P Wedgelock, Receptacle AT60-12-0144 1060-12-0144 Pin Contact, #12 S&F Gold Plate (Reel) AT60-12-0166 1060-12-0166 Pin Contact, #12 S&F Nickel (Reel) AT60-204-12141 0460-204-12141 Pin Contact, #12 Nickel AT60-220-1231 0460-220-1231 Pin Contact, #12 Gold Plate Don Hunsucker, Program Manager 1 . 8 0 0 . 3 9 4 . 7 7 3 2 Ext. 8 6 3 8 donh@sineco.com www.sineco.com ATP Series DTP Series vs. Connectors ATP SERIESTM MATERIAL SPECIFICATIONS DTP MATERIAL SPECIFICATIONS Plug/Receptacle Contacts Plug/Receptacle Contacts Shell: Thermoplastic Pin: Copper Alloy Shell: Thermoplastic Pin: Copper Alloy Wedge: Thermoplastic Socket: Copper Alloy Wedge: Thermoplastic Socket: Copper Alloy Seals: Silicone Elastomer Finish: Nickel-plated (optional Gold) Seals: Silicone Elastomer Finish: Nickel-plated (optional Gold) ATP SERIESTM GENERAL SPECIFICATIONS DTP GENERAL SPECIFICATIONS Dielectric Withstanding Voltage Insulation Resistance Dielectric Withstanding Voltage Insulation Resistance Current leak less than 2 milliamps at 1500 VAC 1000 megohms minimum 25C Current leak less than 2 milliamps at 1500 VAC 1000 megohms minimum 25C Current Ratings (Contact current rating at 125C continuous) Current Ratings (Contact current rating at 125C continuous) Size 12 contact: 25 amps Size 12 contact: 25 amps Corrosion Resistance Corrosion Resistance Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL - STD 1344, method 1001. Connectors show no evidence of corrosion after exposure to 48 hours of salt spray per MIL - STD 1344, method 1001. Submersion Fluid Resistance Submersion Fluid Resistance IP67. Wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage. Connectors show no damage when exposed to most fluids used in industrial application. IP67. Wired and mated connection will withstand immersion under three feet of water without loss of electronic qualities or leakage. Connectors show no damage when exposed to most fluids used in industrial application. Vibration Temperature Vibration Temperature Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20 G's at 10-2000 Hz. Operative at temperatures from -55C to +125C. Continuous at rated current. Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20 G's at 10-2000 Hz. Operative at temperatures from -55C to +125C. Continuous at rated current. Contact Retention Contacts withstand a minimum load of: Contact Retention Contacts withstand a minimum load of: 70lbs. for Size 12 contacts. 70lbs. for Size 12 contacts. Thermal Cycle Durability Thermal Cycle Durability No cracking, chipping or leaking after 20 test cycles from -55C to +125C. No electrical or mechanical defects after 100 cycles of engagement and disengagement. No cracking, chipping or leaking after 20 test cycles from -55C to +125C. No electrical or mechanical defects after 100 cycles of engagement and disengagement. Physical Shock Contact Millivolt Drop Physical Shock Contact Millivolt Drop No unlocking, unmating or other unsatisfactory results during or after 50 G's in each of three usually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition "C". No. 16 contacts - 60 millivolt drop using 16 AWG wire (less drop through wire). Test current 13 amps. No unlocking, unmating or other unsatisfactory results during or after 50 G's in each of three usually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition "C". No. 16 contacts - 60 millivolt drop using 16 AWG wire (less drop through wire). Test current 13 amps. CONTACT RESISTANCE CONTACT RESISTANCE CONTACT SIZE WIRE GUAGE 2 TEST CURRENT RESISTANCE SOLIDS STAMPED & FORMED RESISTANCE CONTACT SIZE WIRE GUAGE 2 TEST CURRENT RESISTANCE SOLIDS STAMPED & FORMED #12 12 25 60 V 100 V #12 12 25 60 V 100 V AWG(mm ) (AMPS) #12 (AMPS) RESISTANCE WIRE SEALING RANGE WIRE SEALING RANGE CONTACT SIZE AWG(mm ) RECOMMENDED WIRE INSULATION O.D. STANDARD (S-Seal) THIN WALL (RD-Seal) .134 - .170 (3.40 - 4.32) .097 - .158 (2.46 - 4.01) CONTACT SIZE #12 RECOMMENDED WIRE INSULATION O.D. STANDARD THIN WALL (E-Seal) .134 - .170 (3.40 - 4.32) .097 - .158 (2.46 - 4.01) (c) 2011 Amphenol Sine Systems Corporation. Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. www.sineco.com