40 9 8 | 7 | 6 5 | 4 | 3 | 2 | 4 CK T a u " ut (78 45) CKT H u H u (78 45) . B -_{=]ox07 508 Eel DIM. A Dim." Bt $4) <7} DIM." A DiM.* B34 xX f |o-_ (2.54) ~/00| 1X21 | (50.80) 2.000| (53.34) 2.100 1X 2 | (2.54) -/00| (5,08) -200 | 1X22 | (53.34) 2.1/100| (55,88) 2,200 hae >> [x] 1X 3 | (5.08) -200 | (7.62) -500| 1X23 | (55.88) 2.200| (58.42) 2.300 1X 4| (7.62) -300 | (10.16) -400| 1X24 | (58.42) 2.300| (60.96) 2.400 1X 5 | (10.16) -400| (12.70) -500| 1X25 | (60.96) 2.400| (63.50) 2.500 1X 6| (12.70) -900 | (15.24) -600| 1X26 | (63.50) 2.500| (66.04) 2.600 h 1X | (15.24) -600| (17.78) -/00| 1X27 | (66.04) 27.600| (68.58) 2.700 7 a 1X 8| (17.78) -/00 | (20.37) ~800| 1X28 | (68.58) 2.700| (71.12) 2.800 1X 9 | (20.32) -800 | (22.86) ~900| 1X29 | (71.12) 2.800| (73.66) 2.900 1X10 | (22.86) -900| (25.490) 1.000] 1X30 | (73.66) 2.900] (76,20) 3.000 (=T00.10)7.004 @y] (2.54 toe [X11 | (25.40) 1.000] (27.94) 1.100) 1X3! | (76.20) 3.000| (78.74) 3./00 ~ 100 004 1X12 | (27.94) 1.100} (30.48) 1.200)| 1X32 | (78.74) 3.100| (81.28) 3.200 . 1X13 | (30.48) 1.200} (33.02) 1.300| 1X33 | (81.28) 3.200)| (83.82) 3.300 WAFER? eee eye? POLYESTER 1X14 | (33.02) 1.300| (35.56) 1.400| 1X34 | (83.82) 3.300| (86.36) 3.400 COLOUR * BLACK. 1X15 | (35.56) 1.400| (38.10) 1.500| 1X35 | (86.36) 3.400| (88.90) 3.500 1X16 | (38.10) 1.500| (40.64) 1.600] IX36 | (88.90) 3.500| (91.44) 3.600 1X17 | (40.64) 1.600} (43.18) 1.700| 1X37 | (91.44) 3.600| (93.98) 3.700 PB ]S .25)7.010 1X18 | (43.18) 1.700| (45.72) 1.800] 1X38 | (93.98) 3.700| (96.52) 3.800 - - 1X19 | (45,72) 1.800| (48.26) 1.900| (X39 | (96.52) 3.800| (99.06) 3.900 1X20 | (48.26) 1.900} (50.80) 2.000| 1X40 | (99.06) 3.900| (/0/1.60) 4.000 NOTES a [@ 1d (0. 15)/.006 1.FOR ASSY NUMBERS WITH FINISH OPTIONS to PINS? (0.635)7.025 SQ. AND DIMWS C & D SEE SHEETS 2 T0 6. _ BRASS WIRE. 2. PRODUCT SPEC: PS-99020-0001 O|o PLATED AS PER 3. RECOMMENDED PCB THICKNESS 1.6mm al LEVEL OF SHEETS 2 TO 6. Sy { 1 PCB. 7 a | 7 >tiiiisiis _ D(1.008:8) [(0.10).004) LTA HEAT 039% (210. 10).004 (2.54) O (2.54)| EXTENT OF 00 7] y GOLD PLATE. ---@- G o0--O- RECOMMENDED P.C. BOARD HOLE PATTERN (0.35)/.0 14 no = =5 DIMENSION STYLE SCALE DESIGN UNITS 25a ae SE) GAN RS | aN (ae Lee [OO RSLARE - 100 Oo sss mm INCH _ | DRAWN BY DATE TITLE am == lZz/\67-0 [DPLACESIE=-- [E--- JDENNEHY 2006/04/18 C-GRID Ill o = F 3 PLACES +--- +--- CHECKED BY DATE SINGLE ROW STRAIGHT se eug il 7 Re eam PIN HEADER BREESE 7-0 A = LONG 2009/12/24 ''&% MOLEX INCORPORATED Oo $A a MATERIAL NO. DOCUMENT NO. SHEET NO. o==t DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 1_0F 6 runout MUST REMAIN SIZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX N1 i WITHIN: DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 6 5 | 4 | 3 | 2 1 Rev. F 2009/06/1810 9 8 7 6 4 3 CIRCUIT PLATING TYPE A PLATING TYPE E PLATING TYPE F SIZE CUSTOMER SPECIFIC CUSTOMER SPECIFIC CUSTOMER SPECIFIC PART NO. PART NO PART NO. PART NO PART NO. PART NO ix 1 |(90120-012] 90120-9121 90120-0761 90120-9761 90120-0921 90120-9921 i xX 2 -O122 = 9122 -O762 - 9762 - 0922 = 9922 ix 3 -0123 = 9123 -O763 - 9763 - 0923 = 9923 ix 4 -0124 = 9124 - 0764 - 9764 - 0924 - 9924 1X 5 -0125 = 9125 - 0765 - 9765 = 0925 = 9925 1X 6 -0126 = 9126 - 0766 - 9766 - 0926 = 9926 i xX 7 -O127 -9127 -O76T - 9767 - 0927 - 9927 ix 8 -0128 = 9128 -0768 - 9768 -0928 = 9928 ix 9 -0129 = 9129 - 0769 - 9769 = 0929 = 9929 1X 10 -0130 - 9130 -O770 -9770 - 0930 - 9930 ma -O131 = 913] -O771 -9771 =093 1 = 993) DIM i xX 12 - 0132 - 9132 -O772 - 9772 - 0932 - 9932 FTX 13 -O133 - 9133 -O773 -9773 - 0933 - 9933 * i_X 14 = 0134 = 9134 -O774 = 9774 = 0934 = 9934 (Cfo? [_X 15 ~0135 ~9135 -O775 ~9775 ~0935 ~ 9935 , i_xX 16 - 0136 - 9136 -OT76 - 9776 - 0936 = 9936 1X If -O137 = 9137 -O777 -9777 -0937 = 9937 ix 18 -0138 - 9138 -O778 -9778 - 0938 - 9938 i_xX 19 = 0139 = 9139 -O779 -9779 = 0939 = 9939 1_X 20 -0140 = 9140 -0780 - 9780 -0940 = 9940 7X 21 -O14] -914] -O78! - 978] -094 | - 994 | DIM i xX 22 -0142 -9142 - 0782 - 9782 - 0942 - 9942 (+990)[ 7X 23 -O143 - 9143 -O0783 - 9783 - 0943 - 9943 D toe | 7X 24 -0144 - 9144 -0784 - 9784 - 0944 - 9944 1X 25 -0145 = 9145 =0785 - 9785 -0945 - 9945 (20390) |_X 26 -O146 - 9146 - 0786 - 9786 - 0946 - 9946 . 1X 27 -O147 -9147 -O787 - 9787 -0947 - 9947 1X 28 -0148 - 9148 -0788 - 9788 -0948 - 9948 1X 29 -0149 - 9149 -0789 - 9789 - 0949 = 9949 1_X 30 -0150 = 9150 -0790 - 9790 -0950 - 9950 7X 3l -O15! -9151 -O79 | -979 1 =0951 - 9951 i_X 32 -O0152 = 9152 -0792 = 9792 -0952 = 9952 1X 33 -0153 = 9153 -0793 - 9793 -0953 = 9953 i_X 34 -0154 - 9154 -0794 - 9794 - 0954 - 9954 1X 35 -0155 = 9155 -0795 = 9795 = 0955 = 9955 i_X 36 -O156 - 9156 - 0796 - 9796 - 0956 - 9956 1X 37 -O157 -9157 -O797 - 9797 -O957 - 9957 1X 38 -0158 - 9158 -0798 - 9798 -0958 - 9958 i_X 39 - 0159 = 9159 -0799 - 9799 = 0959 - 9959 1_X 40 ||90/20-0/60 90120-9160 90120-0800 90120-9800 90120-0960 90120-9960 a = a a GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS SoS 8| ee UNLESS SPECRIED) MM/IN nts | metric |O COARSE AIHE NOTES: ao 3 ss mm INCH _ | DRAWN BY DATE TITLE FOR PLATING VARIATIONS SEE em @58|z W/-0 TZ PLACESIE~ 1 E-> DENNEHY 7006/01/18 C-GRID Il ENG.STD. SDES-99000-0003. o 3 3 PLACES|t+---|+--- CHECKED BY DATE SINGLE ROW STRAIGHT _3 &ING/=0 [2 PLACES|+--- _|[+--- _ DWASZK|EWICZ 2006/01/18 PIN HEADER oO wi |W 1PLACE [E--- |/--- APPROVED BY DATE |STANDARD PRODUCTS | Ba SeS" y-0 ALAR == MLONG 2009/12/24 ''&% MOLEX INCORPORATED Oo $A a MATERIAL NO. DOCUMENT NO. SHEET NO. oz= DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 2 OF 6 enosu< wT bE es SIZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. F 2009/06/18 az REV Ps | 3 2 110 9 8 7 4 3 2 ciRcuiT || PLATING PLATING PLATING circuit || PLATING PLATING PLATING SIZE TYPE A TYPE E TYPE F SIZE TYPE A TYPE E TYPE F PART NO. PART NO. PART _NO. PART NO. PART NO. PART_NO. i_X 1 ||90120-0041 | 90120-068! | 90120-0841 1X 1 ||90120-008! | 90120-0721 | 90120-0881 i xX 2 - 0042 - 0682 | - 0842 i xX 2 Ak -0082 - 0722 - 0882 i xX 3 - 0043 - 0683 - 0843 ix 3 - 0083 -O723 - 0883 i xX 4 - 0044 - 0684 - 0844 i xX 4 - 0084 - 0724 - 0884 1X 5 - 0045 - 0685 - 0845 1X5 - 0085 -0725 - 0885 1X 6 - 0046 - 0686 - 0846 1X 6 - 0086 - 0726 - 0886 i xX 7 - 0047 - 0687 - 0847 ix 7 - 0087 -O727 - 0887 1 xX 8 - 0048 - 0688 - 0848 i xX 8 - 0088 -0728 - 0888 i xX 9 - 0049 - 0689 - 0849 i xX 9 - 0089 -0729 - 0889 i X 10 - 0050 - 0690 - 0850 i xX 10 - 0090 - 0730 - 0890 ma - 0051 - 069 1 - 0851 ix Ti - 0091 -O731 - 0891 DIM i xX 12 - 0052 - 0692 - 0852 DIM i xX 12 - 0092 - 0732 - 0892 FN TTX 13 - 0053 - 0693 - 0853 c FO TX 13 - 0093 -O733 - 0893 a 1X 14 - 0054 - 0694 - 0854 a 1X 14 - 0094 - 0734 - 0894 (9 5b2 |_X 15 -0055 0695 0855 (9502? TX 15 -0095 0735 -0895 . i xX 16 - 0056 - 0696 - 0856 . i xX 16 - 0096 - 0736 - 0896 1X 17 - 0057 - 0697 - 0857 1X Uf - 0097 -O737 - 0897 i xX 18 - 0058 - 0698 - 0858 ix 18 - 0098 - 0738 - 0898 i xX 19 - 0059 - 0699 - 0859 i xX 19 - 0099 - 0739 - 0899 i_X 20 - 0060 - 0700 - 0860 i_X 20 -0100 -0740 - 0900 i xX 21 - 006 | -O701 - 0861 i xX 21 -O101 - O74 1 - 0901 DIM 1X 22 - 0062 -0702 - 0862 DIM 1X 22 -0102 -0742 - 0902 +92 | 7 X 23 - 0063 -0703 - 0863 p Fo | 7 xX 23 -0103 -0743 - 0903 D +o |_I X24 - 0064 - 0704 - 0864 (4.50) -L-* 44 -0104 - 0744 - 0904 (2.90) -_* 25 - 0065 -0705 - 0865 197 | LX 25 -0105 -0745 - 0905 17g LX 26 - 0066 - 0706 - 0866 , i xX 26 -0106 - 0746 - 0906 , 1X 27 - 0067 -O707 - 0867 1X 27 -O107 -O747 - 0907 1X 28 - 0068 -0708 - 0868 1X 28 -0108 - 0748 - 0908 i xX 29 - 0069 - 0709 - 0869 i xX 29 -0109 - 0749 - 0909 i xX 30 - 0070 -0710 - 0870 i X30 -O110 - 0750 - 0910 i xX 31 - 0071 -O711 - 0871 i xX 31 O11 -O751 -O9 11 i xX 32 - 0072 -O712 - 0872 1X 32 -Oll2 -O752 - 0912 1X 33 -0073 -O713 - 0873 1X 33 -O113 -0753 - 0913 i X 34 - 0074 -O714 - 0874 i X 34 -O114 - 0754 -09 14 1X 35 - 0075 -O715 - 0875 1X 35 -O115 -0755 -O915 i X 36 - 0076 -O716 - 0876 i xX 36 -O116 - 0756 -09 16 i xX 37 - 0077 -O717 -O877 |X 37 -O117 -O757 -O9 17 1X 38 - 0078 -O718 - 0878 i xX 38 -O118 -0758 - 0918 i X 39 - 0079 -O719 - 0879 i X39 -O119 - 0759 -0919 i X 40 || 90120-0080 | 90120-0720 | 90120-0880 |X 40 |[ 90120-0120 | 90120-0760 | 90/20-0920 a = a a GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS SoS 8| ee UNLESS SPECRIED) MM/IN nts | metric |O COARSE AIHE NOTES: Oo sss mm INCH _ | DRAWN BY DATE TITLE FOR PLATING VARIATIONS SEE am == 8/2/07-0 [PLACES|E--- [4--- JDENNEHY 2006/01/18 C-GRID Ill ENG.STD. SDES-99000-0003. P 3 E 3 PLACES +- CHECKED BY DATE SINGLE ROW STRAIGHT _o 5 \Y/=0 [Z PLACES =o DWASZK TEWICZ 2006/01/ 18 PIN HEADER oOwww --- --- NON-STANDARD PRODUCTS Bs SB SI G7-0 ANGULAR E> LONG 2009/12/24 ''&% MOLEX INCORPORATED U.A=zE= = gS Fon MATERIAL NO, DOCUMENT NO. SHEET NO. mo 22 DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 3 0F 6 OOo wT bE es SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX w A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. F 2009/06/18 az | 5 s | 3 | 2 110 9 8 7 circuit || PLATING PLATING PLATING SIZE TYPE A TYPE E TYPE F PART NO. PART NO. PART NO. i X_1_||90120-016/ | 90120-080/ | 90120-096! i X 2 k -0162 - 0802 - 0962 i xX 3 - 0163 - 0803 - 0963 i xX 4 - 0164 - 0804 - 0964 i xX 5 -O165 - 0805 - 0965 i X 6 - 0166 - 0806 - 0966 i xX 7 -O167 - 0807 -O967 i xX 8 -0168 - 0808 - 0968 i xX 9 -O169 - 0809 - 0969 i X 10 -O170 - 0810 -0970 i XTi -Ol71 - 0811 - 0971 DIM i xX 12 -0172 -0812 -0972 CF TX 13 -O173 -0813 -0973 S i X14 -0174 - 0814 - 0974 | (6502? T_X 15 0175 0815 -0975 . 1X 16 -O176 - 0816 - 0976 i X17 -O177 -O817 -O977 1X 18 -O178 - 0818 -0978 i X19 -O179 -0819 - 0979 i X 20 -0180 - 0820 - 0980 1X 2) -O78! - 0821 - 098! DIM i X 22 -0182 - 0822 - 0982 p Fo | 7 xX 23 -0183 - 0823 - 0983 i X 24 -0184 - 0824 - 0984 | 4029) x25 -0185 0825 0985 , i X 26 - 0186 - 0826 - 0986 1X 27 -O187 - 0827 - 0987 | X 28 -0188 - 0828 - 0988 i X 29 - 0189 - 0829 - 0989 1X 30 -0190 - 0830 - 0990 i X 3 -O191 - 0831 -099 | 1X 32 -0192 - 0832 - 0992 i X 33 -0193 - 0833 - 0993 1 X 34 -0194 - 0834 - 0994 1X 35 -0195 - 0835 -0995 i X 36 -O196 - 0836 -0996 1X 37 -O197 - 0837 -0997 1X 38 -0198 - 0838 -0998 i X39 -0199 - 0839 - 0999 i X 40 || 90120-0200 | 90120-0840 | 90120-1000 a = a a GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS = =| Simos] (UNLESS SPECRIED) MM/IN nts | metric |O COARSE AIHE NOTES: Oo sss mm INCH _ | ORAWN BY DATE TITLE FOR PLATING VARIATIONS SEE om SS S/ZG/-0 [CPLACES[E--- [2--- JDENNEHY 2006/01/18 C-GRID Ill ENG.STD. SDES-99000-0003. eo = Fr 3 PLACES|t--- |+--- CHECKED BY DATE SINGLE ROW STRAIGHT _2 &ING/=O [2 PLACES|+--- _|[+--- _ DWASZK|EWICZ 2006/01/18 PIN HEADER oO wi |W 1 PLACE [--- +--- APPROVED BY DATE NON-STANDARD PRODUCTS A 2h S'"\G7-0 A = LONG 2009/12/24 flex MOLEX INCORPORATED S2s = MATERIAL NO. DOCUMENT NO. SHEET NO. o==t DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 4 OF 6 GE ts =e _ WITHIN DIMENSIONS SIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX N1 w A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 4 Rev. F 2009/06/1810 9 8 7 4 3 2 4 Rev. F 2009/06/18 | 5 4 | 3 2 1 circuit || PLATING PLATING PLATING PLATING crecuit || PLATING PLATING PLATING PLATING SIZE TYPE B TYPE C TYPE D TYPE G SIZE TYPE G TYPE B TYPE C TYPE D PART NO. | PART NO. | PART NO. | PART NO. PART NO. | PART NO. | PART NO. | PART NO. 7X 1. 1190120-0281|90120-0441|90/20-0601|90120- 1081 TX 1 |[90120- 10011 90120-0201 | 90120-0361 190120-0521 |X 2 - 0282 - 0442 - 0602 - 1082 1X 2 - 1002 -0202| 4 -0362 -0522 TX 3 - 0283 0443 - 0603 - 1083 T_X3 - 1003 ~0203 0363 ~0523 |X 4 - 0284 ~ 0444 0604 - 1084 |_X 4 = 1004 = 0204 0364 = 0524 LX 5 - 0285 0445 - 0605 - 1085 i_xX 5 - 1005 - 0205 - 0365 -0525 TX 6 0286 0446 = 0606 - 1086 |_X 6 - 1006 = 0206 = 0366 0526 i_X 7 - 0287 - 0447 - 0607 - 1087 i_X 7 - 1007 - 0207 - 0367 -0527 i_xX 8 - 0288 0448 - 0608 - 1088 ,_xX 8 - 1008 -0208 0368 -0528 TX 9 = 0289 0449 = 0609 - 1089 TX 9 = 1009 = 0209 = 0369 0529 |_X 10 - 0290 - 0450 - 0610 - 1090 i_X 10 - 1010 -0210 - 0370 - 0530 TX 4f 029] ~045 1 ~O611 ~ 109] man TOTI ~O2T1 - 0371 ~0531 DIM i xX 12 - 0292 - 0452 - 0612 - 1092 DIM LX 12 - 1012 -0212 - 0372 = 0532 c te TTX 13 0293 - 0453 - 0613 - 1093 c $92) TX 13 - 1013 -0213 - 0373 0533 * |X {4 0294 0454 ~0614 - 1094 * |X 14 - 1014 ~0214 0374 0534 (Cte? |X 15 0295 0455 -0615 1095 (O50R" TX 15 ~1015 ~0215 0375 0535 : TX 16 0296 0456 - 0616 - 1096 : |_X 16 - 1016 ~0216 -0376 0536 TX I? ~ 0297 - 0457 ~ 0617 - 1097 TX 17 -1O017 ~O217 ~O0377 0537 i_xX 18 0298 - 0458 -0618 - 1098 i_X 18 - 1018 -0218 - 0378 - 0538 TX 19 0299 0459 -0619 - 1099 7X 19 ~1O019 ~0219 - 0379 0539 |_X 20 - 0300 - 0460 - 0620 - 7100 |_X 20 - 1020 - 0220 - 0380 -0540 1X 2] - 0301 046 | - 0621 -TIOl TX 2/ - 1021 -022] - 038] - 054] DIM 1X 22 - 0302 - 0462 - 0622 - 1102 DIM 1X 22 - 1022 - 0222 - 0382 - 0542 +020)! /_X 23 0303 - 0463 0623 - 1103 +020)[ | _X 23 - 1023 ~ 0223 - 0383 ~0543 D +9080 [1X24 - 0304 - 0464 - 0624 - 1104 D +08 [1X 24 - 1024 0224 - 0384 -0544 |X 25 -0305 - 0465 ~ 0625 ~ 1105 ; |_X 25 - 1025 ~ 0225 -0385 ~0545 (20307 |X 26 - 0306 - 0466 - 0626 - 1106 (2090) |X 26 - 1026 0226 - 0386 - 0546 : |_X 27 - 0307 0467 ~ 0627 - 1107 : |_X 27 - 1027 ~O227 - 0387 - 0547 |_X 28 - 0308 - 0468 = 0628 - 1108 |_X 28 - 1028 0228 - 0388 - 0548 |_X 29 - 0309 - 0469 - 0629 - 1109 |X 29 - 1029 = 0229 - 0389 - 0549 1X 30 -0310 - 0470 - 0630 -TTIO |_X 30 - 1030 - 0230 - 0390 -0550 1X 3] ~O311 ~047 1 0631 -TTH TX 3i -1031 ~0231 039] ~0551 |X 32 -O0312 - 0472 0632 -TTf2 1X 32 - 1032 - 0232 - 0392 -0552 TX 33 ~0313 0473 0633 ~TTI3 TX 33 - 1033 ~ 0233 0393 -0553 |_X 34 -0314 -0474 - 06 34 -1 114 |_X 34 - 1034 - 0234 - 0394 - 0554 |X 35 -0315 -0475 - 0635 ~TTIS |_X 35 - 1035 ~ 0235 0395 -0555 TX 36 -O0316 0476 = 0636 -TTI6 |_X 36 - 1036 0236 0396 -0556 |_X 37 -O317 -O477 - 0637 -TLIT i_X 37 - 1037 - 0237 - 0397 -0557 |_X 38 -0318 - 0478 0638 ~TTT8 |_X 38 - 1038 - 0238 0398 -0558 _X 39 ~0319 = 0479 = 0639 -TTI9 |X 39 1039 -0239 | .-0399 = 0559 |_X 40 || 90/20-0320| 90120 -0480|90120-0640| 90120-1120 i_X 40 || 90120-1040 | 90120-0240 | 90120-0400 | 90120-0560 a = a a GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS SoS 8| ee UNLESS SPECRIED) MM/IN nts | metric |O COARSE AIHE FOR PLATING VARIATIONS SEE OG 225 aN Og/t/t8 C-GRID Il om =SS!z\\G/-0 |Z PLACES |E--- 14--- UDENNEHY ~2006/01/18 - ENG.STD. SDES-99000-0003. 58 : W bP AS ea eexe oy rot SINGLE ROW STRAIGHT si guell > Heke ence PIN HEADER NON-STANDARD PRODUCTS BS EBS hy-0 Paras MONG 2009/1224 Ol MOLEX INCORPORATED ney = Oo $A a MATERIAL NO. DOCUMENT NO. SHEET NO. NOT FOR GENERAL RELEASE amo 2=<e DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 5 OF 6 OOo wT bE es SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX N1 w A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T |9 8 7 6 3 2 4 circuit || PLATING PLATING PLATING PLATING ciRcuIT || PLATING PLATING PLATING PLATING SIZE TYPE B TYPE C TYPE D TYPE G SIZE TYPE B TYPE C TYPE D TYPE G PART NO. | PART NO. | PART NO. | PART NO. PART NO. | PART NO. | PART NO. | PART NO. TX 1|[90120-0241| 90120-0401 190/120-0561 |90120-1041 7_X 1 |[90120-0321 | 90120-0481 | 90120-0641 190/120-1121 TX 2 ~0242| 4b -04021 8 -0562 - 1042 ma ~ 0322 0482 - 0642 ~ [122 XxX 3 0243 - 0403 - 0563 - 1043 i_xX 3 0323 0483 - 0643 ~ 1123 TX 4 0244 0404 0564 - 1044 TX 4 0324 0484 0644 ~ 1124 ,_X 5 0245 - 0405 - 0565 - 1045 Xx 5 ~0325 - 0485 - 0645 ~ 7125 LX 6 - 0246 - 0406 - 0566 - 1046 i_X 6 - 0326 - 0486 - 0646 - 1126 ix 7 0247 - 0407 ~ 0567 - 1047 TX 7 ~ 0327 0487 ~ 0647 ~T127 |_X 8 0248 - 0408 0568 - 1048 Tx 8 0328 0488 = 0648 ~ 1128 rx 9 - 0249 - 0409 - 0569 - 1049 1X 9 0329 - 0489 0649 - 1129 i_X 10 - 0250 -0410 -0570 - 1050 |_X 10 - 0330 - 0490 - 0650 - 7130 ma 0251 0411 -0571 ~1051 TX Tf -0331 049 | =0651 -TI31 DIM 1X 12 - 0252 - 0412 -0572 - 1052 DIM 1X 12 - 0332 - 0492 - 0652 - 1132 c F207 xX 13 ~ 0253 ~ 0413 ~ 0573 - 1053 c Fe [TX 13 0333 -0493 - 0653 ~ 1133 * 1_X {4 - 0254 - 0414 -0574 - 1054 * i_X 14 0334 - 0494 0654 1134 55e. 1_X 15 = 0255 ~0415 =0575 - 1055 (6502 TX 15 -0335 ~ 0495 = 0655 ~ 1135 : TX 16 - 0256 -0416 - 0576 - 1056 . T_X 16 - 0336 0496 0656 - 1136 i_X I? - 0257 -O417 -O577 - 1057 i_X {7 - 0337 0497 - 0657 - 1137 |_X 18 - 0258 ~ 0418 -0578 - 1058 TX 18 0338 0498 - 0658 - 1138 7_X 19 - 0259 - 0419 -0579 - 1059 7_X 19 0339 -0499 = 0659 1139 i_X 20 - 0260 - 0420 - 0580 - 1060 i_X 20 - 0340 - 0500 - 0660 - 1140 TX 2i = 0261 ~ 042] - 0581 1061 TX el - 034 | -0501 = 0661 ~T 14] DIM 1X 22 - 0262 - 0422 - 0582 - 1062 DIM 1X 22 - 0342 -0502 - 0662 - 1142 p Fo) TX 23 - 0263 ~ 0423 - 0583 - 1063 p to X 23 0343 -0503 - 0663 ELE * |X 24 0264 ~ 04 24 0584 - 1064 *: |X 24 0344 = 0504 = 0664 ~ 1144 (4620) [_X 25 0265 0425 0585 (065 (4020) |_X 25 0345 -0505 0665 ~ 1145 . |_X 26 0266 - 0426 - 0586 - 1066 : |_X 26 0346 - 0506 0666 - 1146 i_X 27 - 0267 0427 - 0587 - 1067 |_X 27 0347 - 0507 - 0667 - 1147 |_X 28 - 0268 0428 - 0588 - 1068 |_X 28 0348 - 0508 - 0668 - 1148 |X 29 0269 = 04 29 0589 - 1069 7X 29 = 0349 = 0509 = 0669 ~ 1149 /_X 30 - 0270 - 0430 -0590 - 1070 /_X 30 - 0350 -0510 -0670 - 1150 TX 31 ~0271 - 043] - 059] 1071 7_X 31 ~0351 -O571 ~0671 TI51 |_X 32 -0272 0432 0592 - 1072 |_X 32 ~ 0352 -O512 ~ 0672 ~ [152 1X 33 -0273 0433 - 0593 -1073 i_X 33 - 0353 -O0513 -0673 ~ 1153 |X 34 ~ 0274 - 04 34 -0594 - 1074 |X 34 -0354 ~0514 0674 ~ 7154 [_X 35 -0275 = 0435 -0595 - 1075 |_X 35 -0355 ~0515 - 0675 ~ 7155 |X 36 - 0276 - 04 36 - 0596 - 1076 |_X 36 - 0356 -0516 - 0676 - 1156 |_X 37 ~O277 0437 ~0597 - 1077 |_X 37 -0357 ~O517 ~O677 ~ 7157 [_X 38 -0278 0438 0598 - 1078 |_X 38 0358 -0518 - 0678 ~ 1158 |X 39 -0279| -0439|. 4 -0599 - 1079 1X 39 = 0359 -0519 -0679|-1159 /_X 40 || 90120-0280 | 90120-0440 | 90120-0600 | 90/20- 1080 |_X 40 || 90120-0360 | 90120-0520 | 90120-0680 | 90/20-1160 a = a a GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SoS 8| ee UNLESS SPECRIED) MM/IN NTS | METRIC |ClaRoyection POR PLATING VARIATIONS SEE OG 225 mmf NCH NEN 6/01/18 C-GRID Ill m 8 &/2|\F7= $--e-DENNEHY -2006/01/18 - ENG.STD. SDES-99000-0003, Ss 2 Y/-0 See 1. _frecren oy oe SINGLE ROW STRAIGHT _2 &ING/=O [2 PLACES|+--- _|[+--- _ DWASZK|EWICZ 2006/01/18 PIN HEADER oO to up) Ww --- --- APPROVED BY DATE NON-STANDARD PRODUCTS BS Zhe wo tC eA = MLONG 2009/12/24 ''&% MOLEX INCORPORATED ney = oO Sar MATERIAL NO. DOCUMENT NO. SHEET NO. NOT FOR GENERAL RELEASE noses DRAFT WHERE APPLICABLE] SEE TABLE SDA-90120 6 OF 6 runout wT bE es SIZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A3 INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. F 2009/06/18 az REV | 5 4 | 3 2 110 5 8 7 6 5 4 3 2 1 CIRCUIT PLATING TYPE A PLATING TYPE E PLATING TYPE F SIZE || parr No. PART NO. PART NO. TX 1 _|[90120- 90/120-9 90120- 90/20-9 90120- 90120- |X 3 9 -9 | Xx 9 -9 =g =3 =g =3 9 9 9 79 9 9 9 9 9 9 9 9 9 9 =g =3 =g =3 9 9 9 79 =3 =3 9 9 9 79 QUALITY) GENERAL TOLERANCES HIRD ANGLE YMgoLs| (UNLESS SPECIFIED) MM ONLY mMeTRIC |O CIDRRD ANG 2006/01/ 2006/02! CHKD:DWASZK1 EWI CZ2006/01/ NOTES: FOR PLATING VARIATIONS SEE ENG.STD. SDES-99000-0003, =0 === DENNEHY - 2006/01/18 C-GRID Ill vo PLACES == = i SINGLE ROW STRAIGHT \/-0 [2 PLACES|#--_[+= ZK [EWI CZ 2006/01/18 eee ineNNEHY 2000/01/18 MOLEX INCORPORATED DRA ERE AONE SEE CHART _|SDA-90120 2 OF 6 wiTth Oe Ns THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMSSION _rame _ _P_ _ Rev. D 2004/04/02 9 8 7 6 5 4 3 2 4 STANDARD PRODUCTS ART NOS ADDED NO: 2006-0667 DRWN: JDENNEHY APPR: JDENNEHY