*1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 8 Series E (ESD/EFT) Transient Protected Connectors These fully integrated connectors and adapters provide protection from Electro Static Discharge (ESD) and Electronically Fast Transients (EFT) that can damage or even destroy your equipment. The connectors are designed to meet various IEC 61000-4-21, EN 61000-4-2 and IEC 61000-4 standards, and are offered in a wide range of clamping voltages to fit your specific application. The connectors have integrated ESD transient voltage suppressors from Littelfuse(R), are available in industry standard sizes and are "drop in" replacements for unprotected connectors. ESD Transient Spike Waveform Voltage They are available with various capacitance levels to condition your signals to handle EMI issues at the same time or with as little as a 0.05 pF to protect the integrity of your signal in high speed or digital applications. Typical Time-Voltage Curves Clamping Voltage Features I Clamped Waveform ESD/EFT protection at the I/O ports - Prevents the transients from entering the system before they can cause harm or create EMI problems. Time Typical Time-Voltage Curve of Transient Spike on Integrated Protected Connector with Capacitance (Parts with Working Voltage Code starting with 0) Low ground impedance - The metallic shell provides minimal impedance to direct the damaging transient spikes to ground, which is essential for proper protection. Potential Voltage Overshoot Voltage Removal of ground traces from the board - This eliminates potential line-to-line noise problems and spark-overs between ground and signal lines. I Complete protection - All lines, including ground lines, have bi-directional protection. Voltage Across Connector Clamp Voltage ESD Event Peak Current Current Through Connector I Efficient space utilization - Standard footprints save valuable board space in terms of not only components, but also extra ground traces. Filtered Connectors I Voltage I System Voltage Limit I Fewer components - Reduces total number of components purchased, stocked, placed and tested; yielding the savings of all the hidden costs involved in these activities, while reducing your supplier base. I Available capacitance - Available with various capacitance values to supply low pass properties along with the transient protection, thus supplying ESD/EFT and EMI protection all in one complete package. The metal shell also provides EMI shielding of system. Parts are available with capacitance values less than 50 pF for digital and very high speed signal lines. 181 SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 Protection Trigger Time Typical Time-Voltage Curve of Low Capacitance Integrated Protection (Parts with Working Voltage Code starting with P) Mechanical Specifications Front Shell . . . . . . . . . . . Steel, tin plated Housing. . . . . . . . . . . . . 94V-0 rated thermoplastic, black Eyelets . . . . . . . . . . . . . . Brass, tin plated Threaded Inserts . . . . . . . Zinc Boardlocks . . . . . . . . . . . Copper alloy, tin-lead plated Pin Contacts . . . . . . . . . Brass Socket Contacts . . . . . . . Phosphor Bronze Contact Plating . . . . . . . Duplex plated as follows: 15uin (.38um) . . . . . . . . . . . . . . . . . . . gold on mating end, with entire contact . . . . . . . . . . . . . . . . . . . 50uin (1.27um) min. nickel underplated . . . . . . . . . . . . . . . . . . . and flash gold finish. Current Rating. . . . . . . . 5 Amp per pin Operating Temp . . . . . . . -55C to +125C *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 9 Series E (ESD/EFT) Transient Protected Connectors Ordering Information Example: 56-E04-005-5-T 56 - E 0 4 - 005 Series E (ESD/EFT) Connectors Integrated D-sub Connectors Shell Size/ Number of Contacts 0 1 2 3 - 9 size 15 size 25 size 37 size This part number represents a Series E connector with a shell size of 9 and a socket to right angle configuration. The maximum working voltage is 5.5 VDC and the connector has a .590" footprint with 4-40 threads. - 5 - Contact Type/Termination Working Voltage Code 1 2 3 4 5 6 7 See table below. (Use 3-digit code that matches your electrical requirements) - Pin to solder cup Pin to right angle Socket to straight PCB Socket to right angle Adapter (pin to socket) Socket to solder cup Pin to straight PCB Mounting or Hardware Options _ - .120 thru-hole and 15" gold 3G - 30" gold 5G - 50" gold SC and Straight PCBs (only) TIB - 4-40 thread on rear of flange TIF - 4-40 thread on front of flange MIB - M3 thread on rear of flange GBL6 - for .062" boards JS - Jack screws Right Angles and Adapters (only) _ - No GBL attached GL - Includes grounding board lock T - 4-40 threads GB - No board locks J - Jack screws M - M3 thread GJ - GL and jack screws T Footprint (right angle connectors only) 3 - .318" 4 - .405" 5 - .590" Transient Voltage Protection with Capacitance Immunity to IEC 61000-4-2 (ESD) up to level 4 and IEC 61000-4-4 (EFT) air and contact discharge specifications. Clamp Voltage Peak Current Energy (J) Working Max. Working Voltage V breakdown 8 x 20 s VDC VAC 8 x 20 s 1 ma 10 x 100 s Voltage Code 0.3 5 (3.7-7.0) 120 10.0@5A 2.5 3.5 003 0.3 8 (7.1-9.3) 120 15.5@5A 4.0 5.5 005 0.1 12 (11-14) 40 20.0@2A 6.5 9.0 009 0.1 16 (14-18.5) 40 25.0@2A 9.0 12.0 012 0.3 18 (15.9-20.3) 120 30.0@5A 10.0 14.0 014 0.3 25 (22-28) 120 40.0@5A 14.0 18.0 018 0.3 34 (29.5-38.5) 100 58.0@5A 20.0 26.0 026 0.1 42 (37-46) 30 65.0@2A 25.0 30.0 030 >25.0 >30.0 Please consult factory for availability Typical Cap. pF at 1 MHz 2200 1600 450 350 480 450 190 80 Notes: Consult factory for custom capacitance values. Typical leakage at 25C is <25 A Maximum leakage 50 A at Vm(DC) Immunity to IEC 61000-4-2 (ESD) up to Level 4 air and contact discharge. Excellent for digital, high speed and high frequency signals. Working Max. Working Trigger Clamp Voltage Leakage (A) Typical Cap. Voltage Code Voltage (V) DC Voltage Current at 1 MHz Typical Maximum 1000 P24 24.0 150.0 80.0 <1.0 nA 0.05 pF Board Layouts .318" and .405" Footprint Typical Layout - Top View .054 (1.385) .109 (2.77) O.043 (1.09) O.120 (3.05) .318 or .405 (8.08) (10.20) .056 .112 (1.42) (2.84) A Shell A Size .005 (0.13) 9 .984 (24.99) 15 1.312 (33.32) 25 1.852 (47.04) 37 2.500 (63.50) Dimensions in inches (mm) .590" Footprint Typical Layout - Top View .054 (1.385) .109 (2.77) .112 (2.84) .590 (14.99) B Shell B Size .005 (0.13) 9 .984 (24.99) .315 (8.00) 15 1.312 (33.32) .315 (8.00) 25 1.852 (47.04) 37 2.500 (63.50) O.043 (1.09) O.120 (3.05) Filtered Connectors Transient Voltage Protection without Significant Capacitance Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 182 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 10 Series E (ESD/EFT) Transient Protected Connectors Pin Contact (plug) Socket Contact (receptacle) Straight PC Mount Straight PC Mount A B C A B C .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) .32 .50.010 (7.90) (12.55.25) .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) o .12 (3.05) .039.010 (0.99.25) .23.006 (6.000.15) .24 (4.06) .054 (1.385) D .14.015 (5.580.38) .24 (4.06) .112 (2.84) .42.010 (10.720.25) .055 (1.385) D .15.015 (5.580.38) A B C A B C .32 .50.010 (7.90) (12.55.25) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. Filtered Connectors o .12 (3.05) .16 (4.06) 9 B C D 1.213.015 .984.005 .667.010 .755 (30.810.38) (24.990.13) (16.920.25) (19.18) E Footprint .318 .405 25 2.088.015 1.852.005 1.534.010 1.614 (53.040.38) (47.040.13) (38.960.25) (41.00) 2.73.015 2.50.005 2.18.010 2.27 (69.320.38) (63.500.13) (55.420.25) (57.71) .590 .16 (4.06) E F .430 .318 (10.92) (8.08) .517 .405 (13.13) (10.29) .700 .590 (17.83) (14.99) Size 9 A B .039.010 (0.99.25) E F .112 (2.84) .42.010 (10.720.25) .125 (3.175) D Dimensions in inches (mm) 183 .23.006 (6.000.15) .025 (0.64) SQ F 15 1.541.015 1.312.005 .994.010 1.083 (39.140.38) (33.320.13) (25.250.25) (27.51) 37 o .12 (3.05) .039.010 (0.99.25) .112 (2.84) .42.010 (10.720.25) .125 (3.175) D A .055 (1.385) Typ. .011 (2.84) .23.006 (5.900.15) .025 (0.64) SQ Size .112 (2.84) .42.010 (10.720.25) 90 PC Mount 90 PC Mount .011 (2.84) .039.010 (0.99.25) C D 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) Footprint .430 .318 (10.92) (8.08) .405 .517 .405 (13.13) (10.29) .590 .700 .590 (17.83) (14.99) 25 2.088.015 1.852.005 1.511.010 1.614 (53.040.38) (47.040.13) (38.380.25) (41.00) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) F .318 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) 37 E Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 *1566 PRINTER 171-241 v2 12/4/06 9:42 AM Page 11 Series E (ESD/EFT) Transient Protected Connectors Pin Contact (plug) Pin - Socket Adapter Solder Cup Termination A B C A .311 (7.90) .33 .50.010 (8.36) (12.55.25) .055 (1.385) Typ. .011 (2.84) o .12 (3.05) o .12 (3.05) .24.006 (6.000.15) E F D .039.010 (0.99.25) .241.006 (6.120.15) Shell .053 (1.34) .42.010 (10.720.25) .520 (13.31) Socket Contact (receptacle) B Solder Cup Termination Shell with grounding inserts A B C C D E .32 .50.010 (7.90) (12.55.25) o .12 (3.05) .24.006 (6.000.15) E F D Size C .053 (1.34) .42.010 (10.720.25) F Size A 1.213.015 .984.005 .643.010 .755 (30.810.38) (24.990.13) (16.330.25) (19.18) .16 (4.06) .16 (4.06) 9 .642 (16.31) 15 1.541.015 1.312.005 .971.010 1.083 (39.140.38) (33.320.13) (24.660.25) (27.51) .16 (4.06) .16 (4.06) 15 25 2.089.015 1.852.005 1.511.010 1.615 (53.040.38) (47.040.13) (38.380.25) (41.00) .16 (4.06) .16 (4.06) 2.73.015 2.50.005 2.16.010 2.27 (69.320.38) (63.500.13) (54.840.25) (57.71) .16 (4.06) .16 (4.06) 37 B .039.010 (0.99.25) E 9 A .329 .500.015 (8.36) (12.700.38) .250 (6.35) Typ. D Dimensions in inches (mm) B C D E .233.006 1.213.015 (5.92.15) (30.81.38) .984 (24.99) .667 (16.94) .970 (24.64) .233.006 1.541.015 (5.92.15) (39.14.38) 1.312 (33.33) .995 (25.27) 25 1.511 (38.38) .228.006 2.088.015 (5.80.15) (53.04.38) 1.852 (47.05) 1.532 (38.92) 37 2.158 (54.82) .228.006 2.729.015 (5.80.15) (69.32.38) 2.500 (63.50) 2.183 (55.45) Filtered Connectors .055 (1.385) Typ. .011 (2.84) Dimensions in inches (mm) SPECTRUM CONTROL INC. * 8031 Avonia Rd. * Fairview, PA 16415 * Phone: 814-474-2207 * Fax: 814-474-2208 * Web site: www.spectrumcontrol.com SPECTRUM CONTROL GmbH * Hansastrasse 6 * 91126 Schwabach, Germany * Phone: (49)-9122-795-0 * Fax: (49)-9122-795-58 184