SMBJ SERIES CREAT BY ART 600 Watts Suface Mount Transient Voltage Suppressor SMB/DO-214AA Pb RoHS COMPLIANCE Features For surface mounted application Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min Typical IR less than 1uA above 10V High temperature soldering guaranteed: 260 / 10 seconds at terminals Plastic material used carried Underwriters Laboratory Flammability Classification 94V-0 600 watts peak pulse power capability with a 10/1000 us waveform Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Case: Molded plastic Terminals: Pure tin plated, lead free XX = Specific Device Code Polarity: Indicated by cathode band except bipolar G = Green Compound Standard packaging: 12mm tape per EIA Std RS-481 Y = Year Weight: 0.093 gram M = Work Month Maximum Ratings and Electrical Characteristics Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol Value Unit Peak Power Dissipation at TA=25, Tp=1ms(Note 1) PPK 600 Watts Steady State Power Dissipation PD 3 Watts Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)(Note 2) - Unidirectional Only IFSM 100 Amps Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) VF 3.5 / 5.0 Volts RJC RJA 10 55 /W TJ, TSTG -65 to +150 Typical Thermal Resistance Operating and Storage Temperature Range Note 1: Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 Per Fig. 2 Note 2: Mounted on 10 x 10mm Copper Pads to Each Terminal Note 3: VF=3.5V on SMBJ5.0 thru SMBJ90 Devices and VF=5.0V on SMBJ100 thru SMBJ170 Devices Devices for Bipolar Applications 1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170 2. Electrical Characterstics Apply in Both Directions Version:G11 RATINGS AND CHARACTERISTIC CURVES (SMBJ SERIES) FIG. 1 PEAK PULSE POWER RATING CURVE FIG.2 PULSE DERATING CURVE PEAK PULSE POWER(P PP) OR CURRENT (IPP) A DERATING IN PERCENTAGE (%) PPPM, PEAK PULSE POWER, KW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 TA = 25 10 1 125 100 75 50 25 0 0.1 0.1 1 10 100 1000 0 10000 120 100 Peak Value IPPM 100 Half Value-IPPM/2 10/1000usec, WAVEFORM 80 75 100 125 150 175 200 FIG. 4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 8.3mS Single Half Sine Wave JEDEC Method UNIDIRECTIONAL ONLY IFSM, PEAK FORWARD SURGE A CURRENT (A) PEAK PULSE CURRENT (%) PULSE WIDTH(td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% OF IPPM tr=10usec 50 o FIG. 3 CLAMPING POWER PULSE WAVEFORM 140 25 TA, AMBIENT TEMPERATURE ( C) tp, PULSE WIDTH, (uS) 60 40 20 td 0 0 0.5 1 1.5 2 2.5 3 3.5 4 t, TIME ms 10 1 10 NUMBER OF CYCLES AT 60 Hz CJ, JUNCTION CAPACITANCE (pF) A FIG. 5 TYPICAL JUNCTION CAPACITANCE 100000 10000 VR=0 1000 100 TA=25 f=1.0MHz Vsig=50mVp-p VR-RATED STAND-OFF VOLTAGE 10 1 10 100 V(BR), BREAKDOWN VOLTAGE (V) Version:G11 100 ELECTRICAL CHARACTERISTICS (T A=25 unless otherwise noted) Device SMBJ5.0 SMBJ5.0A SMBJ6.0 SMBJ6.0A SMBJ6.5 SMBJ6.5A SMBJ7.0 SMBJ7.0A SMBJ7.5 SMBJ7.5A SMBJ8.0 SMBJ8.0A SMBJ8.5 SMBJ8.5A SMBJ9.0 SMBJ9.0A SMBJ10 SMBJ10A SMBJ11 SMBJ11A SMBJ12 SMBJ12A SMBJ13 SMBJ13A SMBJ14 SMBJ14A SMBJ15 SMBJ15A SMBJ16 SMBJ16A SMBJ17 SMBJ17A SMBJ18 SMBJ18A SMBJ20 SMBJ20A SMBJ22 SMBJ22A SMBJ24 SMBJ24A SMBJ26 SMBJ26A SMBJ28 SMBJ28A SMBJ30 SMBJ30A SMBJ33 SMBJ33A SMBJ36 SMBJ36A SMBJ40 SMBJ40A SMBJ43 SMBJ43A Device Marking Code KD KE KF KG KH KK KL KM KN KP KQ KR KS KT KU KV KW KX KY KZ LD LE LF LG LH LK LL LM LN LP LQ LR LS LT LU LV LW LX LY LZ MD ME MF MG MH MK ML MM MN MP MQ MR MS MT Breakdown Voltage (Note 1) Test Current Stand-Off Voltage VBR V IT mA VWM V Maximum Reverse Leakage @ VWM ID uA 10 10 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5.0 5.0 6.0 6.0 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 20 20 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 800 800 800 800 500 500 200 200 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Min. 6.40 6.40 6.67 6.67 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.0 10.0 11.1 11.1 12.2 12.2 13.3 13.3 14.4 14.4 15.6 15.6 16.7 16.7 17.8 17.8 18.9 18.9 20.0 20.0 22.2 22.2 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 Max. 7.30 7.00 8.15 7.37 8.82 7.98 9.51 8.60 10.3 9.21 10.9 9.83 11.5 10.4 12.2 11.1 13.6 12.3 14.9 13.5 16.3 14.7 17.6 15.9 19.1 17.2 20.4 18.5 21.8 19.7 23.1 20.9 24.4 22.1 27.1 24.5 29.8 26.9 32.6 29.5 35.3 31.9 38.0 34.4 40.7 36.8 44.9 40.6 48.9 44.2 54.3 49.1 58.4 52.8 Maximum Peak Pulse Current IPPM A (Note 2) 65.0 68.0 55.0 61.0 51.0 56.0 47.0 52.0 44.0 48.0 42.0 46.0 39.0 43.0 37.0 40.0 33.0 37.0 31.0 34.0 28.0 31.0 26.0 29.0 24.4 27.0 23.1 25.1 21.8 24.2 20.0 22.8 19.5 21.5 17.6 19.4 15.0 17.7 14.6 16.0 13.5 14.9 12.6 13.8 11.7 13.0 10.6 11.8 9.8 10.8 8.8 9.7 8.2 9.0 Maximum Clamping Voltage @ IPPM Vc V 9.6 9.2 11.4 10.3 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.0 45.4 53.5 48.4 59.0 53.3 64.3 58.1 71.4 64.5 76.7 69.4 Version : G11 ELECTRICAL CHARACTERISTICS (T A=25 unless otherwise noted) Device Device Marking Code Breakdown Voltage (Note 1) Test Current Stand-Off Voltage VBR V IT mA VWM V Min. Max. SMBJ45 MU 50.0 61.1 1 45 SMBJ45A MV 50.0 55.3 1 45 SMBJ48 MW 53.3 65.1 1 48 SMBJ48A MX 53.3 58.9 1 48 SMBJ51 MY 56.7 69.3 1 51 SMBJ51A MZ 56.7 62.7 1 51 SMBJ54 ND 60.0 73.3 1 54 SMBJ54A NE 60.0 66.3 1 54 SMBJ58 NF 64.4 78.7 1 58 SMBJ58A NG 64.4 71.2 1 58 SMBJ60 NH 66.7 81.5 1 60 SMBJ60A NK 66.7 73.7 1 60 SMBJ64 NL 71.1 86.9 1 64 SMBJ64A NM 71.1 78.6 1 64 SMBJ70 NN 77.8 95.1 1 70 SMBJ70A NP 77.8 86 1 70 SMBJ75 NQ 83.3 102 1 75 SMBJ75A NR 83.3 92.1 1 75 SMBJ78 NS 86.7 106 1 78 SMBJ78A NT 86.7 95.8 1 78 SMBJ85 NU 94.4 115 1 85 SMBJ85A NV 94.4 104 1 85 SMBJ90 NW 100 122 1 90 SMBJ90A NX 100 111 1 90 SMBJ100 NY 111 136 1 100 SMBJ100A NZ 111 123 1 100 SMBJ110 PD 122 149 1 110 SMBJ110A PE 122 135 1 110 SMBJ120 PF 133 163 1 120 SMBJ120A PG 133 147 1 120 SMBJ130 PH 144 176 1 130 SMBJ130A PK 144 159 1 130 SMBJ150 PL 167 204 1 150 SMBJ150A PM 167 185 1 150 SMBJ160 PN 178 218 1 160 SMBJ160A PP 178 197 1 160 SMBJ170 PQ 189 231 1 170 SMBJ170A PR 189 209 1 170 Notes: 1. VBR measure after IT applied for 300us, IT=square wave pulse or equivalent. 2. Surge current waveform per Figure. 3 and derate per Figure. 2 3. All terms and symbols are consistent with ANSI/IEEE C62.35. 4. For bidirectional use C or CA suffix for types SMBJ5.0 through SMBJ170 5. For bipolar types having VWM of 10 volts(SMBJ8.0C) and under, the ID limit is doubled. Maximum Reverse Leakage @ VWM ID uA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Maximum Peak Pulse Current IPPM A (Note 2) 7.8 8.6 7.3 8.1 6.9 7.6 6.5 7.2 6.1 6.7 5.8 6.5 5.5 6.1 5.0 5.5 4.7 5.2 4.5 5.0 4.1 4.6 3.9 4.3 3.5 3.8 3.2 3.5 2.9 3.2 2.7 3.0 2.3 2.5 2.2 2.4 2.0 2.2 Maximum Clamping Voltage @ IPPM Vc V 80.3 72.7 85.5 77.4 91.1 82.4 96.3 87.1 103 93.6 107 96.8 114 103 125 113 134 121 139 126 151 137 160 146 179 162 196 177 214 193 231 209 266 243 287 259 304 275 Version : G11 TVS APPLICATION NOTES: Transient Voltage Suppressors may be used at various points in a circuit to provide various degrees of protection. The following is a typical linear power supply with transient voltage suppressor units plaved at different points. All provide protection of the load. Transient Voltage Suppressor 1 provides maximum protection. However, the system will probably require replacement of the line fuse(F) since it provides a dominant portion of the series impedance when a surge is encountered. Hower, we do not recommend to use the TVS diode here, unless we can know the electric circuit impedance and the magnitude of surge rushed into the circuit. Otherwise the TVS diode is easy to be destroyed by voltage surge. Transient Voltage Suppressor 2 provides execllent protection of circuitry excluding the transformer(T). However, since the transformer is a large part of the series impedance, the chance of the line fuse opening during the surge condition is reduced. Transient Voltage Suppressor 3 provides the load with complete protection. It uses a unidirectional Transient Voltage Suppressor, which is a cost advantage. The series impedance now includes the line fuse, transformer, and bridge rectifier(B) so failure of the line fuse is further reduced. If onlt Transient Voltage Suppressor 3 is in use, then the bridge rectifier is unprotected and would require a higher voltage and current rating to prevent failure by transients. Any combination of this three, or any one of these applivations, will prevent damage to the load. This would require varying trade-offs in power supply protection versus maintenance(changing the time fuse). An additional method is to utilize the Transient Voltage Suppressor units as a controlled avalanche bridge. This reduces the parts count and incorporated the protection within the bridge rectifier. RECOMMENDED PAD SIZES The pad dimensions should be 0.010"(0.25mm) longer than the contact size, in the lead axis. This allows a solder filler to form, see figure below. Contact factort for soldering methods. Version : G11