Technical Data Electronic Hour Meter, AC Hour Meter 211 T50 Series ENM's Series T50 electronic AC hour meter is a low cost reliable hour meter incorporating the latest state-of-the-art in electronics. It's quartz-crystal time base insures accurate long term time-keeping. A reliable electromechanical wheel-type indicator is used to store accumulated hours. This compact tamperproof meter is sealed against the environment to provide years of service. The T50 elapsed time indicator was designed for use on test and recording equipment, for providing maintenance control, for establishing warranty programs, for measuring machine utilization and production time, or for any application where time-in-use is to be determined. Specifications Time Scale: 6-digits 99,999.9 Hours Automatic recycle to zero Figures: Hours - White on black Tenths - Red on white Height - 0.140" Operation Voltage: 230, 115, 48, 24 VAC + _10% 50/60 Hz Other voltage available Power Consumption: Less than 0.4 Watts * Solid State Electronic Drive Circuit Accuracy: Better than +_0.02% over entire range * Quartz-Crystal for Accurate Timing Temperature: -40F to +185F (-40C to +85C) * Non-reset Vibration Resistance: Withstands 10-80 Hz at 20g's max. (SAE J1378) * High Impact, Tamperproof Plastic Case Shock: 55g at 9-13 ms (SAE J1378) * IP65 Humidity: 95% (SAE J1378) * Indicates Operating Time in Hours and Tenths Terminations: 1/4" male blade terminals Configuration: Round SAE Bezel with new push-on retaining ring Round 3-Hole Bezel T50A2, T50B2 Features * Low Power Consumption * UL/cUL Recognized, CE & RoHS Compliant * No Battery Back-Up Required * Quiet operation * MADE IN THE U.S.A. 2013 ENM Co.(R) ENM Company 5617 Northwest Highway, Chicago, IL 60646-6135 (773) 775-8400 * Fax: (773) 775-5968 Toll Free (888) 372-0465 * e-mail: customerservice@enmco.com web site: www.enmco.com (c) ENM Co. T50 Series 211 Dimensional Data T50 Series (T50 A) Q UA AG RT Z C HIC O PUSH-ON RETAINING RING (T50 B) Q U AR T Z C HIC A G O PANEL GASKET; UL/NEMA 4X12 P/N A40047-S PANEL GASKET; UL/NEMA 4X12 WITH MTG HARDWARE; P/N B20017 (T50 E) Q UA AG RT Z C HIC O PUSH-ON RETAINIG RING 2013 ENM Co.(R) LIMITED WARRANTY ENM Company resettable electromechanical counters are warranted to the consumer to be free from defects in material and workmanship for a period of 3 years. All ENM products which fall within the warranty period due to defects in material or workmanship will be repaired or replaced, at ENM's option, without charge to the consumer when returned with proof of purchase to any authorized ENM dealer in the United States, transportation charges prepaid, provided there is no evidence of improper installation, tampering, ENM Company 5617 Northwest Highway, Chicago, IL 60646-6135 (773) 775-8400 * Fax: (773) 775-5968 * Toll Free (888) 372-0465 e-mail: customerservice@enmco.com ISO 9001:2000 web site: www.enmco.com (c) ENM Co.