GLASS PASSIVATION 0603 Thick Film Chip Resistor Standard Grade, Wraparound WRAPAROUND TERMINATIONS RESISTOR FILM 96% ALUMINA CHIP PERFORMANCE CHARACTERISTICS 1W-40MW 0.5%,1%, 2%, 5%,10% 100, 200, 300 ppm 78.4C/W 100 mW 45 Volts POWER DISSIPATION TEMPERATURE RISE (C) Resistance Range Tolerances (1) TCR Thermal Resistance Maximum Power Maximum Voltage (1)+/- 0.5% limited availability ENVIRONMENTAL PERFORMANCE (2) fiber epoxy board ceramic board POWER DISSIPATION (WATTS) 0.03% 0.03% 0.03% 0.03% 0.05% 0.05% See Chart Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life Test LIFE TEST POWER DERATING (2)Typical resistance change, test methods and criteria per MIL-PRF-55342. PART NUMBERING S 0603 C P X 150 J 20 - TR PACKAGING CODE: - TR = Tape/Reel - W = Waffle Carrier (Default packaging is Bulk) TEMPERATURE CHARACTERISTIC: 10: 100 ppm 20: 200 ppm 30: 300 ppm TOLERANCE: F: 1% G: 2% J: 5% K: 10% M: 20% RESISTANCE VALUE: Four digits are used for tolerances of 1% or lower, three digits are used above 1%. Leading digits are significant while the last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. TERMINATION FINISH: X: Sn60 over Nickel (Solderable) C: Silver bearing (Epoxy bondable-RoHS) G: Gold (Epoxy bondable-RoHS) Y: Silver over Nickel (Solderable -RoHS) Z: Gold over Nickel (Solderable-RoHS) PRODUCT DESIGNATION: P: Thick film on alumina U: Untrimmed alumina (10% & 20% tolerance only) TERMINATION TYPE: C: Wraparound termination SIZE CODE GRADE: S: Standard Production H: High Reliability (For Screening options, contact the factory) MECHANICAL INCHES Length Width Thickness Top Term Bottom Term Gap Approx. Weight .062 (.060 - .070) .032 (.030 - .037) .018 (.013 - .023) .010 (.007 - .017) .014 (.010 - .020) .034 (.030 - .038) .00235 grams MILLIMETERS 1.58 0.81 0.46 0.25 0.36 0.86 .092 MINIMUM RECOMMENDED MOUNTING PADS (INCHES) (1.52 - 1.78) (0.76 - 0.94) (0.33 - 0.58) (0.18 - 0.43) (0.25 - 0.51) (0.76 - 0.97) .034 .030 .031 "Specifications subject to change without notice." STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 www.resistor.com 02/08/08