SDZ5V1F ZENER DIODE Small Signal Zener Diode General Description These diodes small signal Zener diodes, fabricated in planar technology. Miniature surface mount package is excellent for hand-held and portable applications where is space is limited. Features and Benefits Silicon epitaxial planar diode Low Zener impedance and low leakage current Standard Zener voltage tolerance is 4.3%. Full lead (Pb)-free device and RoHS compliant device Available in "Green" device SOT-23F Applications Voltage regulator Ordering Information Part Number Marking Code Package Packaging SDZ5V1F Z2 SOT-23F Tape & Reel Marking Information Z2 Z 2 = Specific Device Code = Year & Week Code Marking Pinning Information Pin Description 1 Anode 2 Not Connected 3 Cathode Rev. date: 25-NOV-10 Simplified Outline KSD-D5C005-001 Graphic Symbol www.auk.co.kr 1 of 5 SDZ5V1F Absolute Maximum Ratings (Tamb=25, Unless otherwise specified) Characteristic Symbol Ratings Unit Power dissipation 1) PD 200 mW Operating junction temperature TJ 150 C Storage temperature range Tstg -55 to +150C C Symbol Ratings Unit Rth(j-a) 625 C/W 1) Device mounted on FR-4 board with recommended pad layout. Thermal Characteristics (Tamb=25, Unless otherwise specified) Characteristic Thermal resistance, junction to ambient 1) 1) Device mounted on FR-4 board with recommended pad layout. Electrical Characteristics (Tamb=25, Unless otherwise specified) Characteristic Symbol Test Condition Min. Typ. Max. Unit Zener voltage VZ IZ=5mA 4.88 - 5.32 V Dynamic impedance ZZT IZ=5mA - - 70 KNEE dynamic impedance ZZK IZ=0.25mA - - 2050 VR=2V - - 2 A Reverse leakage current Rev. date: 25-NOV-10 IR KSD-D5C005-001 www.auk.co.kr 2 of 5 SDZ5V1F Rating and Characteristic Curves Fig. 1) Typical Zener Characteristics Fig. 2) Typical Forward Characteristics Fig. 3) Typical Capacitance Characteristics Fig. 4) Power Dissipation vs. Ambient Temperature Rev. date: 25-NOV-10 KSD-D5C005-001 www.auk.co.kr 3 of 5 SDZ5V1F Package Outline Dimensions Recommend PCB solder land (Unit : mm) Rev. date: 25-NOV-10 KSD-D5C005-001 www.auk.co.kr 4 of 5 SDZ5V1F The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 25-NOV-10 KSD-D5C005-001 www.auk.co.kr 5 of 5